Hikvision DS-2TD2366-50 manual

Hikvision DS-2TD2366-50
7.8 · 1
PDF manual
 · 135 pages
English
manualHikvision DS-2TD2366-50
Thermal Network Bullet Camera User Manual
23
UDP: Provides real-time audio and video streams.
MULTICAST: It’s recommended to select MCAST type when using the
Multicast function. For detailed information about Multicast, refer to
Section6.1.1.
Play Performance: Set the play performance to Shortest Delay, Balanced or
Fluent.
Rules: It refers to the rules on your local browser, select enable or disable to
display or not display the colored marks when the motion detection, face
detection, or intrusion detection is triggered. E.g., enabled as the rules are, and
the face detection is enabled as well, when a face is detected, it will be marked
with a green rectangle on the live view.
Image Format: Choose the image format for picture capture.
Display Temperature Info. : Display the temperature information, such as
frames, lines, temperature values, etc in the live view.
Display Temperature Info. on Capture: Display the temperature information,
such as frames, lines, temperature values, etc on the captured snapshot.
Record File Settings: Set the saving path of the recorded video files. Valid for the
record files you recorded with the web browser.
Record File Size: Select the packed size of the manually recorded and
downloaded video files to 256M, 512M or 1G. After the selection, the
maximum record file size is the value you selected.
Save record files to: Set the saving path for the manually recorded video files.
Save downloaded files to: Set the saving path for the downloaded video files
in playback mode.
Picture and Clip Settings: Set the saving paths of the captured pictures and
clipped video files. Valid for the pictures you capture with the web browser.
Save snapshots in live view to: Set the saving path of the manually captured
pictures in live view mode.
Save snapshots when playback to: Set the saving path of the captured
pictures in playback mode.

Manual

View the manual for the Hikvision DS-2TD2366-50 here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-2TD2366-50 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Hikvision and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Hikvision DS-2TD2366-50 specifications

Below you will find the product specifications and the manual specifications of the Hikvision DS-2TD2366-50.

General
BrandHikvision
ModelDS-2TD2366-50 | DS-2TD2366-50
Productsecurity camera
EAN0842571110050, 6954273652081
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)
Performance
TypeIP security camera
Placement supportedIndoor & outdoor
Alarm input/outputYes
Connectivity technologyWired
Languages supportEnglish
Network
Ethernet LANYes
Wi-FiNo
BluetoothNo
Ethernet interface typeFast Ethernet
Cabling technology10/100Base-T(X)
Number of users32 user(s)
Quality of Service (QoS) supportYes
Networking standardsIEEE 802.1x
Supported network protocolsIPv4/IPv6, HTTP, HTTPS, 802.1x, Qos, FTP, SMTP, UPnP, SNMP, DNS, DDNS, NTP, RTSP, RTCP, RTP, TCP, UDP, IGMP, ICMP, DHCP, PPPoE
Video
Maximum resolution640 x 512 pixels
Total megapixels- MP
Video streamingYes
Video compression formatsH.264, H.264+, H.265, H.265+, M-JPEG
3D NR (Noise Reduction)Yes
Automatic gain controlYes
Security
Temperature sensorYes
Security algorithmsHTTPS
IP address filteringYes
Packaging content
Number of cameras1
Audio
Voice codecsG.711a, G.711u, G.722.1, G.726, MP2L2
Ports & interfaces
BNC output ports1
Microphone inYes
InterfaceRJ-45
Storage
Card reader integratedYes
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, MicroSDXC
Built-in HDDNo
Maximum memory card size64 GB
Night vision
Night vision-
Management features
Web-based managementYes
Web browserYes
Power
DC output voltage12
Power consumption (max)8 W
Power source typeAC, DC
AC input voltage24 V
Operational conditions
Operating temperature (T-T)-40 - 65 °C
Weight & dimensions
Width535 mm
Depth400 mm
Height171 mm
Weight6400 g
Lens system
Closest focusing distance7.5 m
Maximum aperture number1
Number of lenses1
Fixed focal length50 mm
Image sensor
Sensor type-
Number of sensors-
Camera
Minimum illumination- lx
Design
Mounting typeCeiling/wall
Product colorWhite
Form factorBullet
International Protection (IP) codeIP66
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hikvision DS-2TD2366-50 below.

What is the weight of the Hikvision DS-2TD2366-50?

The Hikvision DS-2TD2366-50 has a weight of 6400 g.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

What is the height of the Hikvision DS-2TD2366-50?

The Hikvision DS-2TD2366-50 has a height of 171 mm.

What is the width of the Hikvision DS-2TD2366-50?

The Hikvision DS-2TD2366-50 has a width of 535 mm.

What is the depth of the Hikvision DS-2TD2366-50?

The Hikvision DS-2TD2366-50 has a depth of 400 mm.

Is the manual of the Hikvision DS-2TD2366-50 available in English?

Yes, the manual of the Hikvision DS-2TD2366-50 is available in English .

Is your question not listed? Ask your question here

No results