Hikvision DS-2TD2366-50 manual

Hikvision DS-2TD2366-50
7.8 · 1
PDF manual
 · 135 pages
English
manualHikvision DS-2TD2366-50
Thermal Network Bullet Camera User Manual
107
Figure 10-2 Record Parameters
Pre-record: The time you set to start recording before the scheduled time or
the event. For example, if an alarm triggers recording at 10:00, and the
pre-record time is set as 5 seconds, the camera starts to record at 9:59:55.
The Pre-record time can be configured as No Pre-record, 5s, 10s, 15s, 20s, 25s,
30s or not limited.
Post-record: The time you set to stop recording after the scheduled time or the
event. For example, if an alarm triggered recording ends at 11:00, and the
post-record time is set as 5 seconds, the camera records until 11:00:05.
The Post-record time can be configured as 5s, 10s, 30s, 1 min, 2 min, 5 min or
10 min.
Stream Type: Select the stream type for recording.
Note: The record parameter configurations vary depending on the camera model.
4. Select a Record Type. The record type can be Continuous, Motion Detection,
Alarm, Motion | Alarm, Motion & Alarm, and Event.
Continuous
If you select Continuous, the video will be recorded automatically according
to the time of the schedule.
Record Triggered by Motion Detection
If you select Motion Detection, the video will be recorded when the motion is
detected.
Besides configuring the recording schedule, you have to set the motion
detection area and check the checkbox of Trigger Channel in the Linkage
Method of Motion Detection Settings interface. For detailed information,

Manual

View the manual for the Hikvision DS-2TD2366-50 here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-2TD2366-50 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Hikvision and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Hikvision DS-2TD2366-50 specifications

Below you will find the product specifications and the manual specifications of the Hikvision DS-2TD2366-50.

General
BrandHikvision
ModelDS-2TD2366-50 | DS-2TD2366-50
Productsecurity camera
EAN0842571110050, 6954273652081
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)
Performance
TypeIP security camera
Placement supportedIndoor & outdoor
Alarm input/outputYes
Connectivity technologyWired
Languages supportEnglish
Network
Ethernet LANYes
Wi-FiNo
BluetoothNo
Ethernet interface typeFast Ethernet
Cabling technology10/100Base-T(X)
Number of users32 user(s)
Quality of Service (QoS) supportYes
Networking standardsIEEE 802.1x
Supported network protocolsIPv4/IPv6, HTTP, HTTPS, 802.1x, Qos, FTP, SMTP, UPnP, SNMP, DNS, DDNS, NTP, RTSP, RTCP, RTP, TCP, UDP, IGMP, ICMP, DHCP, PPPoE
Video
Maximum resolution640 x 512 pixels
Total megapixels- MP
Video streamingYes
Video compression formatsH.264, H.264+, H.265, H.265+, M-JPEG
3D NR (Noise Reduction)Yes
Automatic gain controlYes
Security
Temperature sensorYes
Security algorithmsHTTPS
IP address filteringYes
Packaging content
Number of cameras1
Audio
Voice codecsG.711a, G.711u, G.722.1, G.726, MP2L2
Ports & interfaces
BNC output ports1
Microphone inYes
InterfaceRJ-45
Storage
Card reader integratedYes
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, MicroSDXC
Built-in HDDNo
Maximum memory card size64 GB
Night vision
Night vision-
Management features
Web-based managementYes
Web browserYes
Power
DC output voltage12
Power consumption (max)8 W
Power source typeAC, DC
AC input voltage24 V
Operational conditions
Operating temperature (T-T)-40 - 65 °C
Weight & dimensions
Width535 mm
Depth400 mm
Height171 mm
Weight6400 g
Lens system
Closest focusing distance7.5 m
Maximum aperture number1
Number of lenses1
Fixed focal length50 mm
Image sensor
Sensor type-
Number of sensors-
Camera
Minimum illumination- lx
Design
Mounting typeCeiling/wall
Product colorWhite
Form factorBullet
International Protection (IP) codeIP66
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hikvision DS-2TD2366-50 below.

What is the weight of the Hikvision DS-2TD2366-50?

The Hikvision DS-2TD2366-50 has a weight of 6400 g.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

What is the height of the Hikvision DS-2TD2366-50?

The Hikvision DS-2TD2366-50 has a height of 171 mm.

What is the width of the Hikvision DS-2TD2366-50?

The Hikvision DS-2TD2366-50 has a width of 535 mm.

What is the depth of the Hikvision DS-2TD2366-50?

The Hikvision DS-2TD2366-50 has a depth of 400 mm.

Is the manual of the Hikvision DS-2TD2366-50 available in English?

Yes, the manual of the Hikvision DS-2TD2366-50 is available in English .

Is your question not listed? Ask your question here

No results