Hikvision DS-2TD2366-100 manual

Hikvision DS-2TD2366-100
5.5 · 1
PDF manual
 · 118 pages
English
manualHikvision DS-2TD2366-100
Thermometric Network Bullet Camera User Manual
80
You can set the quality and resolution for the captured picture.
Upload JPEG Image to Center: Check the checkbox to upload the captured
image to the surveillance center when a VCA alarm occurs.
Picture Quality: High, Medium and Low are selectable.
Picture Resolution: 384*288, CIF, 4CIF, 720P, and 1080P are selectable.
Note: Selectable picture resolution options vary according to different
camera models.

5.8.5 Behavior Analysis

Purpose:
The behavior analysis detects a series of suspicious behavior, and certain linkage
methods will be enabled if the alarm is triggered. Refer to the following steps to
configure behavior analysis settings.
Steps:
1. Configure the display information and snapshot settings from the VCA Info. page.
2. Set the Camera Calibration
Perform the following steps to three-dimensionally measure and quantize the
image from the camera, and then calculate the size of every target. The VCA
detection will be more accurate if the camera calibration is configured.
Steps:
1) Enter the Camera Calibration setting interface:
Configuration > VCA Configuration > Camera Calibration
2) Check the checkbox of Camera Calibration to enable this function.
3) Select the calibration mode as Input Basic Data or Draw on Live View Video.
Input Basic Data: Input the mounting height, viewing angle, and horizon
ratio of the camera manually.
Draw on Live View Video: Click Draw Verification Line (Horizontal) /
(Vertical) to draw a horizontal/vertical line in the live view, and input the
actual length in Real Length field. With the drawn reference lines and their
real length, the camera can conclude other objects appear in the live view.

Manual

View the manual for the Hikvision DS-2TD2366-100 here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 5.5. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-2TD2366-100 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Hikvision and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Hikvision DS-2TD2366-100 specifications

Below you will find the product specifications and the manual specifications of the Hikvision DS-2TD2366-100.

General
BrandHikvision
ModelDS-2TD2366-100 | DS-2TD2366-100
Productsecurity camera
EAN0842571110173, 6954273652104
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)
Performance
TypeIP security camera
Placement supportedIndoor & outdoor
Connectivity technologyWired
Languages supportEnglish
Alarm input/outputYes
Network
Ethernet LANYes
Wi-FiNo
BluetoothNo
Ethernet interface typeFast Ethernet
Cabling technology10/100Base-T(X)
Number of users32 user(s)
Quality of Service (QoS) supportYes
Supported network protocolsIPv4/IPv6, HTTP, HTTPS, 802.1x, Qos, FTP, SMTP, UPnP, SNMP, DNS, DDNS, NTP, RTSP, RTCP, RTP, TCP, UDP, IGMP, ICMP, DHCP, PPPoE
Networking standardsIEEE 802.1x
Lens system
Closest focusing distance10 m
Fixed focal length100 mm
Maximum aperture number1
Number of lenses1
Night vision
Night vision-
Storage
Maximum memory card size64 GB
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, MicroSDXC
Card reader integratedYes
Built-in HDDNo
Security
Temperature sensorYes
Security algorithmsHTTPS
IP address filteringYes
Packaging content
Number of cameras1
Operational conditions
Operating temperature (T-T)-40 - 65 °C
Image sensor
Sensor type-
Number of sensors-
Management features
Web-based managementYes
Web browserYes
Camera
Minimum illumination- lx
Power
DC output voltage12
Power consumption (max)8 W
Power source typeAC, DC
AC input voltage24 V
Video
Video streamingYes
Automatic gain controlYes
3D NR (Noise Reduction)Yes
Video compression formatsH.264, H.264+, H.265, H.265+, M-JPEG
Maximum resolution640 x 512 pixels
Total megapixels- MP
Weight & dimensions
Weight6400 g
Width535 mm
Depth400 mm
Height171 mm
Audio
Voice codecsG.711a, G.711u, G.722.1, G.726, MP2L2
Design
International Protection (IP) codeIP66
Form factorBullet
Product colorWhite
Mounting typeCeiling/wall
Ports & interfaces
Microphone inYes
InterfaceRJ-45
BNC output ports1
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hikvision DS-2TD2366-100 below.

What is the weight of the Hikvision DS-2TD2366-100?

The Hikvision DS-2TD2366-100 has a weight of 6400 g.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

What is the height of the Hikvision DS-2TD2366-100?

The Hikvision DS-2TD2366-100 has a height of 171 mm.

What is the width of the Hikvision DS-2TD2366-100?

The Hikvision DS-2TD2366-100 has a width of 535 mm.

What is the depth of the Hikvision DS-2TD2366-100?

The Hikvision DS-2TD2366-100 has a depth of 400 mm.

Is the manual of the Hikvision DS-2TD2366-100 available in English?

Yes, the manual of the Hikvision DS-2TD2366-100 is available in English .

Is your question not listed? Ask your question here

No results