Hikvision DS-2TD2366-100 manual

Hikvision DS-2TD2366-100
5.5 · 1
PDF manual
 · 118 pages
English
manualHikvision DS-2TD2366-100
Thermometric Network Bullet Camera User Manual
77
2. Set the alarm rule: Select a temperature measurement rule from the rule list and
configure the parameters.
Name: You can customize the rule name.
Type: Select point, line, or frame as rule type.
Emissivity: Set the emissivity of your target. Note: The emissivity of each
object is different.
Distance (m): The straight-line distance between the target and the device.
Reflective Temperature: If there is any target with high emissivity in the
scene, check the checkbox and set the reflective temperature to correct the
temperature. If no such target exists, uncheck the checkbox.
Figure 5-48 Temperature Measurement Configuration
3. Click in the list to show the alarm rule interface.
Alarm Rule: The alarm rule varies according to different types. The rule is to
compare the temperature information of two selected regions. For targets set
by frame, the rules include: Max. Temperature is Higher than, Max.
Temperature is Lower than, Min. Temperature is Higher than, Min.

Manual

View the manual for the Hikvision DS-2TD2366-100 here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 5.5. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-2TD2366-100 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Hikvision and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Hikvision DS-2TD2366-100 specifications

Below you will find the product specifications and the manual specifications of the Hikvision DS-2TD2366-100.

General
BrandHikvision
ModelDS-2TD2366-100 | DS-2TD2366-100
Productsecurity camera
EAN0842571110173, 6954273652104
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)
Performance
TypeIP security camera
Placement supportedIndoor & outdoor
Connectivity technologyWired
Languages supportEnglish
Alarm input/outputYes
Network
Ethernet LANYes
Wi-FiNo
BluetoothNo
Ethernet interface typeFast Ethernet
Cabling technology10/100Base-T(X)
Number of users32 user(s)
Quality of Service (QoS) supportYes
Supported network protocolsIPv4/IPv6, HTTP, HTTPS, 802.1x, Qos, FTP, SMTP, UPnP, SNMP, DNS, DDNS, NTP, RTSP, RTCP, RTP, TCP, UDP, IGMP, ICMP, DHCP, PPPoE
Networking standardsIEEE 802.1x
Lens system
Closest focusing distance10 m
Fixed focal length100 mm
Maximum aperture number1
Number of lenses1
Night vision
Night vision-
Storage
Maximum memory card size64 GB
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, MicroSDXC
Card reader integratedYes
Built-in HDDNo
Security
Temperature sensorYes
Security algorithmsHTTPS
IP address filteringYes
Packaging content
Number of cameras1
Operational conditions
Operating temperature (T-T)-40 - 65 °C
Image sensor
Sensor type-
Number of sensors-
Management features
Web-based managementYes
Web browserYes
Camera
Minimum illumination- lx
Power
DC output voltage12
Power consumption (max)8 W
Power source typeAC, DC
AC input voltage24 V
Video
Video streamingYes
Automatic gain controlYes
3D NR (Noise Reduction)Yes
Video compression formatsH.264, H.264+, H.265, H.265+, M-JPEG
Maximum resolution640 x 512 pixels
Total megapixels- MP
Weight & dimensions
Weight6400 g
Width535 mm
Depth400 mm
Height171 mm
Audio
Voice codecsG.711a, G.711u, G.722.1, G.726, MP2L2
Design
International Protection (IP) codeIP66
Form factorBullet
Product colorWhite
Mounting typeCeiling/wall
Ports & interfaces
Microphone inYes
InterfaceRJ-45
BNC output ports1
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hikvision DS-2TD2366-100 below.

What is the weight of the Hikvision DS-2TD2366-100?

The Hikvision DS-2TD2366-100 has a weight of 6400 g.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

What is the height of the Hikvision DS-2TD2366-100?

The Hikvision DS-2TD2366-100 has a height of 171 mm.

What is the width of the Hikvision DS-2TD2366-100?

The Hikvision DS-2TD2366-100 has a width of 535 mm.

What is the depth of the Hikvision DS-2TD2366-100?

The Hikvision DS-2TD2366-100 has a depth of 400 mm.

Is the manual of the Hikvision DS-2TD2366-100 available in English?

Yes, the manual of the Hikvision DS-2TD2366-100 is available in English .

Is your question not listed? Ask your question here

No results