Hikvision DS-2CE56C2T-IR(2.8MM) manual

Hikvision DS-2CE56C2T-IR(2.8MM)
9.9 · 1
PDF manual
 · 2 pages
English
manualHikvision DS-2CE56C2T-IR(2.8MM)
Figure 2-2 Fix the Mounting Base and the Camera
6.Adjust the camera according to the figure below
to get an optimum angle.
Figure 2-3 3-axis Adjustment
0 ~360°°0~75°°0 ~360°°
2.2 Installation of Type CameraII
1.Drill the screw holes and the cable hole on the
ceiling according to the supplied drill template.
Steps:
Figure 2-4 The Drill Template
Mounting Base
Hole
Hole
Figure 2-5 Fix the Mounting Base and Camera
2.Fix the mounting base to the ceiling with the
supplied screws.
3.Route the cables to the cable hole and connectcorresponding power cable and video cable.4.Secure the camera to the mounting base.5.Fix the enclosure to camera.
6.Attach the trim ring to the camera and rotate
it clockwise to secure the camera loosely.
0 ~360°°0~75°°0 ~360°°
Figure 2-6 3-axis Adjustment
2.3 Installation of Type CameraIII
1.Hold the mounting base, and rotate the lower
dome counterclockwise to disassemble the
lower dome and the black liner.
2.Drill the screw holes and the cable hole on the
ceiling according to the supplied drill template.
Steps:
Drilling Template
Screw Hole
Screw Hole
3.Route the cables to the cable hole and connect
the corresponding power cable and video cable.
4.Fix the mounting base to the ceiling with
the supplied screws.
5.Adjust the Lens
1).Loosen the tilting lock screws besides the
lens.
2).Adjust the camera from the pan angle
(0 ~ 355 ); tilt angle (0 ~ 90 ), and rotate°° °°
the lens(0 ~355 ) to get the optimum angle.°°
3).Tighten the tilting lock screws.
355°
355°
0-90°
6.Fit the black liner back to the camera.
7.Install the lower dome back to the camera and
rotate it clockwise to get it secured.
Figure 2-7 The Drill Template & Mounting
Base Installation
Figure 2-8 3-axis Adjustment
& Lower Dome

3 Menu Operation

Figure 3-1 Main Menu
Menu
SCENE
LENS
RESETEXPOSURE
WB
DAY&NIGHTBACKLIGHT
NR
SPECIALADJUSTINDOOROUTDOORINDOOR1
LOW-
LIGHTMANUALSHUTTER
AGC
SENS-UPBRIGHTNESSD-WDRDEFOG
BLC
HSBLC
ATW
AWC-SETINDOOROUTDOORMANUALCOLOR
B/W
EXT
2D NR3D NR
CAM
TITLED-EFFECTMOTIONPRIVACYLAUGUAGEDEFECTVERSIONSHARPNESSMONITOR
LSC
VIDEO.
OUT
EXIT
SETUP
A coaxial camera controller (purchase separately)
is required to select the menu and adjust the
camera parameters.
3.1 VIDEO.OUT
PAL or NTSC is selectable .
3.2 LANGUAGE
English, Japanese, CHN1, CHN2, Korean, German,
French, Italian, Spanish, Polish, etc., are selectable.
3.3SETUP
3.3.1 SCENE
You can select indoor, outdoor, indoor 1 and low
-light as the working environments.
3.3.2 LENS
The camera is equipped with a fixed lens.
3.3.3 EXPOSURE
EXPOSURE1. SHUTTER AUTO2. AGC OFF3. SENS-UP ---4. BRIGHTNESS ---|------ 405. DEFOG OFF6. BACKLIGHT OFF7. RETURN RET
Figure 3-2 Exposure
SHUTTER: AUTO,1/25, 1/50, FLK, 1/200, 1/400,
1/1k, 1/2k, 1/5k, 1/10k, 1/50k, x2, x4, x6, x8, x10,
and x15 are selectable.
: You can set the AGC value from 0 to 15.AGC
: You can set the SENS-UP to OFF or AUTO.SENS-UP
: You can set the brightness valueBRIGHTNESS
from 1 to 100.
: You can set the D-WDR to ON to improveD-WDR
the image quality or OFF to disable the function.
: You can set the defog function as ON toDEFOG
enable the function. Position, size, and the defog
gradation are configurable.
3.3.4 Backlight
Backlight Compensation (BLC):
Set the gain of BLC as High, Middle, or Low.-GAIN:
Press the up/down/left/right button to-AREA:
define the BLC position and size. Select RET or
AGAIN to go back the BLC menu or re-define the
BLC area.
Restore the BLC settings to the default.-Default:
HSBLC:
Select an HSBLC area. Set the DISPLAY status as ON.
Press the up/down/left/right button to define the
area position and size. Set the HSBLC LEVEL from 0
to 100. Select ALL DAY or Night for the HSBLC mode.
Set the BLACK MASK status as ON or OFF.
HSBLC1. SELECT AREA 12. DISPLAY ON 83. LEVEL ---|------ 404. MODE ALL DAY5. BLACK MASK ON6. DEFAULT 87. RETURN RET
Figure 3-3 HSBLC
3.3.5 White Balance (WB)
INDOOR, OUTDOOR, MANUAL, ATW (Auto-tracking
White Balance), AWC→SET are selectable.
3.3.6 Day & Night
Color, B/W, and EXT are selectable for DAY and
NIGHT switches.
3.3.7 NR
: You can set 2D NR status as ON or OFF.2D NR
: Set the Smart NR status as ON and adjust3D NR
the 3D smart NR sensitivity ranges from 0 to 100.
Set the 3D NR LEVEL ranges from 0 to 100. Set the
2D&3D NR1. 2DNR OFF2. 3DNR ON
8
3. RETURN RET3D NR1. SMART NR ON
8
2. LEVEL ------|--8 03. START. AGC -|--------104. END. AGC -|--------105. RETURN RET
Figure 3-5 NR
Figure 3-6 3D NR
3.3.8 SPECIAL
: Edit the camera title on this section.Camera Title
:D-effect
: Set the freeze function as ON or OFF.-FREEZE
: OFF, MIRROR, V-FLIP, and ROTATE are-MIRROR
selectable for mirror.
: Define the zoom area by configuring-D-ZOOM
the position from PAN & TILT.
: The D-Zoom area, sensitivity-SMART D-ZOOM
and time are configurable.
: Set the NEG IMAGE as ON or OFF.-NEG.IMAGE
SPECIAL1. CAM TITLE ON
8
2. D-DFFECT 83. MOTION OFF4. PRIVACY OFF5. LANGUAGE ENG
8
6. DEFECT 87. VERSION 1307228. RETURN RET
Figure 3-7 Special
MOTION1. SELECT AREA 12. DISPLAY ON83. SENSITIVITY ----|---- 304. MOTION VIEW ON5. DEFAULT 86. RETURN RET
Figure 3-8 Motion Detection
Motion: Select a MOTION area. Set the DISPLAY
status as ON or OFF. Press the up/down/left/right
button to define the position and size of the area.
Set the SENSITIVITY from 0 to 60. Set the MOTION
VIEW status as ON or OFF.
Privacy: Select a PRIVACY area. Set the DISPLAY
status as INV, MOSAIC, COLOR or OFF. Press the
up/down/left/right button to define the position
and size of the area.
Defect: LIVE DPC, STATIC DPC and Black DPC are
adjustable in this section.
: You can check the software version of theVersion
device.
PRIVACY1. SELECT AREA 12. DISPLAY MOSAIC
8
3. COLOR 104. TRANS. 15. DEFAULT
8
6. RETURN RETADJUST1. SHARPNESS--------|152. MONITOR LCD83. LSC OFF4. VIDEO. OUT PAL5. RETURN RET
3.3.9 ADJUST
: Adjust the sharpness from 0 to 15.Sharpness
: Monitor CRT, and Monitor LCD areMonitor
selectable.
: Set the LSC status as ON or OFF.LSC
3.3.10 RESET
Reset all the settings to the default.
3.3.11 EXIT
Press OK to exit the menu.
START. AGC level as the threshold to enable AGC,
and set the END. AGC level as the threshold to
disable AGC.
Figure 3-9 Privacy Mask
Figure 3-10 Adjust

Manual

View the manual for the Hikvision DS-2CE56C2T-IR(2.8MM) here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 9.9. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-2CE56C2T-IR(2.8MM) or do you need help? Ask your question here

Need help?

Do you have a question about the Hikvision and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Hikvision DS-2CE56C2T-IR(2.8MM) specifications

Below you will find the product specifications and the manual specifications of the Hikvision DS-2CE56C2T-IR(2.8MM).

General
BrandHikvision
ModelDS-2CE56C2T-IR(2.8MM) | DS-2CE56C2T-IR(2.8MM)
Productsecurity camera
EAN6954273620851
LanguageEnglish
FiletypeUser manual (PDF)
Performance
Type-
Placement supported-
Connectivity technologyWired
Day/night modeYes
Network
Wi-FiNo
Ethernet LAN-
Design
WeatherproofYes
Form factorDome
Product colorWhite
Mounting typeCeiling
International Protection (IP) codeIP66
Audio
Signal-to-Noise Ratio (SNR)62 dB
Video
Maximum resolution1280 x 960 pixels
Frame rate30 fps
Total megapixels1.3 MP
Full HDNo
Supported video modes720p
Analog signal format systemNTSC, PAL
Weight & dimensions
Height69.8 mm
Diameter89.5 mm
Weight280 g
Power
Power over Ethernet (PoE)-
Power consumption (typical)4 W
Camera
Minimum illumination0.01 lx
Field of view (FOV) angle92.6 °
Tilt angle range0 - 75 °
Pan range0 - 360 °
Angle of rotation360 °
Camera shutter speed1/50000 - 1/30 s
Operational conditions
Operating temperature (T-T)-40 - 60 °C
Image sensor
Sensor typeCMOS
Packaging content
Number of cameras1
Storage
Built-in HDDNo
Night vision
Night visionYes
Night vision distance20 m
LED typeIR
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hikvision DS-2CE56C2T-IR(2.8MM) below.

What is the weight of the Hikvision DS-2CE56C2T-IR(2.8MM)?

The Hikvision DS-2CE56C2T-IR(2.8MM) has a weight of 280 g.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

What is the height of the Hikvision DS-2CE56C2T-IR(2.8MM)?

The Hikvision DS-2CE56C2T-IR(2.8MM) has a height of 69.8 mm.

Is the manual of the Hikvision DS-2CE56C2T-IR(2.8MM) available in English?

Yes, the manual of the Hikvision DS-2CE56C2T-IR(2.8MM) is available in English .

Is your question not listed? Ask your question here

No results