Hikvision DS-2CE16D0T-IT1E manual

Hikvision DS-2CE16D0T-IT1E
8.4 · 1
PDF manual
 · 14 pages
English
manualHikvision DS-2CE16D0T-IT1E
EXPOSURE
BRIGHTNESS
EXPOSURE MODE
AGC
DWDR
RETURN
5
G LO B AL
H IG H
O FF

Figure 3. 3 EXPOSURE
BRIGHTNESS
Brightness refers to the brightness of the image. You
can set the brightness value from 1 to 10 to darken or
brighten the image. The greater the value is, the
brighter the image is.
EXPOSURE MODE
You can set the EXPOSURE MODE as GLOBAL, or BLC.
GLOBAL
GLOBAL refers to the normal exposure mode which
adjusts lighting distribution, variations, and
non-standard processing.
BLC (Backlight Compensation)
BLC (Backlight Compensation) compensates light to the
object in the front to make it clear, but this may cause
the over-exposure of the background where the light is
strong.
You can set the brightness value from 0 to 8 to darken
or brighten the image. The greater the value is, the
brighter the image is.
AGC (Auto Gain Control)
It optimizes the clarity of the image in poor light
conditions. The AGC level can be set as HIGH, MIDDLE,
or LOW. Select OFF to disable the AGC function.
Note:
The noise will be amplified when the AGC is on.
DWDR (Digital Wide Dynamic Range)
The digital wide dynamic range helps the camera
provide clear images even under backlight
circumstances. WDR balances the brightness level of
the whole image and provides clear images with details.
3.3.2 WB (White Balance)
White balance, the white rendition function of the
camera, is to adjust the color temperature according to
the environment. It can remove unrealistic color casts in
the image. You can set WB mode as ATW, or MWB.
ATW
Under the ATW mode, white balance is being adjusted
automatically according to the color temperature of the
scene illumination.
MWB
You can set the RGAIN/BGAIN value from 1 to 255 to
adjust the shades of red/blue color of the image.
WB
MODE
RGAIN
BGAIN
RETURN
MWB
5
5

Figure 3. 4 MWB MODE

Manual

View the manual for the Hikvision DS-2CE16D0T-IT1E here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-2CE16D0T-IT1E or do you need help? Ask your question here

Need help?

Do you have a question about the Hikvision and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Hikvision DS-2CE16D0T-IT1E specifications

Below you will find the product specifications and the manual specifications of the Hikvision DS-2CE16D0T-IT1E.

General
BrandHikvision
ModelDS-2CE16D0T-IT1E | DS-2CE16D0T-IT1E(2.8MM)
Productsecurity camera
EAN6954273651022
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)
Video
Supported video modes1080p
Total megapixels2 MP
Analog signal format systemNTSC, PAL
Frame rate30 fps
Maximum resolution1920 x 1080 pixels
Full HDYes
Automatic gain controlYes
Noise reductionYes
Smart IRYes
Lens system
Fixed focal length2.8 mm
Packaging content
Number of cameras1
Performance
Day/night modeYes
Infrared (IR) cut-off filterYes
Connectivity technologyWired
TypeCCTV security camera
Placement supportedIndoor & outdoor
Design
International Protection (IP) codeIP66
Form factorBullet
Product colorWhite
Mounting typeCeiling/wall
Housing materialMetal, Plastic
Image sensor
Progressive scanYes
Sensor typeCMOS
Power
Power source typeDC
Power over Ethernet (PoE)-
DC output voltage12
Power consumption (max)4 W
Camera
Minimum illumination0 lx
Camera shutter speed1//50000 - 1/25 s
Pan range0 - 360 °
Tilt angle range0 - 180 °
Angle of rotation360 °
103.55 °
Technical details
Lens mount interfaceM12
Output impedance75 Ω
Storage
Built-in HDDNo
Audio
Signal-to-Noise Ratio (SNR)62 dB
Ports & interfaces
Composite video out1
InterfaceBNC
Operational conditions
Operating temperature (T-T)-40 - 60 °C
Weight & dimensions
Width86.7 mm
Height81.6 mm
Length226 mm
Weight430 g
Night vision
Night visionYes
LED typeIR
Night vision distance20 m
Network
Ethernet LANNo
Wi-FiNo
BluetoothNo
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hikvision DS-2CE16D0T-IT1E below.

What is the weight of the Hikvision DS-2CE16D0T-IT1E?

The Hikvision DS-2CE16D0T-IT1E has a weight of 430 g.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

What is the height of the Hikvision DS-2CE16D0T-IT1E?

The Hikvision DS-2CE16D0T-IT1E has a height of 81.6 mm.

What is the width of the Hikvision DS-2CE16D0T-IT1E?

The Hikvision DS-2CE16D0T-IT1E has a width of 86.7 mm.

Is the manual of the Hikvision DS-2CE16D0T-IT1E available in English?

Yes, the manual of the Hikvision DS-2CE16D0T-IT1E is available in English .

Is your question not listed? Ask your question here

No results