1)Select the dial mode from the drop-down list. Auto and Manual are selectable.
If Auto is selected, you can set the arming schedule for dialing; If Manual is
selected, you can set the offline time and manual dialing parameters.
2)Set the access number, user name, password, APN, MTU and verification
protocol. You can also leave these parameters blank, and the device will
adopt the default settings for dialing after other parameters are configured.
3)Select the network mode from the drop-down list. Auto, 3G and 4G are
selectable. If Auto is selected, the network selection priority comes as: 4G >
3G > Wired Network.
4)Input the offline time if Manual is selected as the dial mode.
5)Input the UIM Number (Mobile Phone Number).
6)Click the Edit button to set the arming schedule if Auto is selected as the dial
mode.
7)vii.Click Save to save the settings.
4.View the dial status.
1)Click the Refresh button to view the dial status including real-time mode,
UIM status, signal strength, etc.
2)If Manual is selected as the dial mode, you can also manually connect /
disconnect the wireless network.
5.5.Set the white list. The mobile phone number on the white list can receive the
alarm message from the device and reboot the device via SMS.
1)Check the checkbox of Enable SMS Alarm.
2)Select the item on the white list, and click the Edit button.
3)Input the mobile phone number for the white list, check the checkbox of
Reboot via SMS, select the alarm for SMS push, and click OK.
Note: To reboot the device via SMS, send the message "reboot" to the device,
and the device will reply a message "reboot success" after rebooting
succeeded. iv.(Optional) You can click Send Test SMS to send a message to
the mobile phone for test.
4)v.Click Save to save the settings.
Manual
View the manual for the Hikvision DS-2CD4D26FWD-IZM here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-2CD4D26FWD-IZM or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hikvision DS-2CD4D26FWD-IZM below.
What is the weight of the Hikvision DS-2CD4D26FWD-IZM?
The Hikvision DS-2CD4D26FWD-IZM has a weight of 1200 g.
What is a megapixel?
The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.
What does the abbreviation 'MP' stand for?
MP stands for MegaPixels.
What is the height of the Hikvision DS-2CD4D26FWD-IZM?
The Hikvision DS-2CD4D26FWD-IZM has a height of 133.5 mm.
Is the manual of the Hikvision DS-2CD4D26FWD-IZM available in English?
Yes, the manual of the Hikvision DS-2CD4D26FWD-IZM is available in English .
Need help?
Do you have a question about the Hikvision and is the answer not in the manual?
Question and answer
Number of questions: 0