Hikvision DS-2CD4D26FWD-IZM manual

Hikvision DS-2CD4D26FWD-IZM
8.9 · 1
PDF manual
 · 175 pages
English
manualHikvision DS-2CD4D26FWD-IZM
Network Camera User Manual
136
people entered and exited is displayed on the live video.
4. Set the detection line.
An orange line, named as detection line can be set on the live video, and the
object entering or exiting through the line will be detected and counted.
1) Click to draw a detection line, and an orange detection line will
appear on the image.
Note:
The detection line should be drawn at the position right below the
camera, and it should cover the whole entrance / exit.
Draw the detection line at the position dont have many people lingering.
2) Click-and-drag the detection line to adjust its position.
3) Click-and-drag the two end points of the detection line to adjust its length.
4) Click to delete the detection line.
5) Click to to change the direction.
5. Click the button, and the number of the people entered and exited will be
cleared to zero.
6. Click Arming Schedule to enter the arming schedule interface, and
click-and-drag the mouse on the time bar to set the time.
7. Check Linkage Method tab to select the linkage method.
8. Click Save to save the settings.
Note:
The counting statistics will be calculated under Application tab. Go to
Application to check the counting statistics.

10.3.5 Heat Map

Heat map is a graphical representation of data represented by colors. The heat map
function of the camera usually be used to analyze the visit times and dwell time of
customers in a configured area.
Steps:
1. Enter the Heat Map configuration interface: Configuration > Heat Map.

Manual

View the manual for the Hikvision DS-2CD4D26FWD-IZM here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-2CD4D26FWD-IZM or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Hikvision and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Hikvision DS-2CD4D26FWD-IZM specifications

Below you will find the product specifications and the manual specifications of the Hikvision DS-2CD4D26FWD-IZM.

General
BrandHikvision
ModelDS-2CD4D26FWD-IZM | DS-2CD4D26FWD-IZM(2.8-12MM)
Productsecurity camera
EAN6954273672065
LanguageEnglish
FiletypeUser manual (PDF)
Lens system
Focal length range2.8 - 12 mm
Number of lenses-
Video
Total megapixels2 MP
Noise reductionYes
3D NR (Noise Reduction)Yes
Video compression formatsH.264, H.265, M-JPEG
Maximum resolution1920 x 1080 pixels
Full HDYes
Frame rate30 fps
Back Light Compensation (BLC)Yes
Highlight Compensation (HLC)Yes
Image quality adjustmentBrightness, Contrast, Saturation, Sharpness
Region of Interest (ROI) encodingYes
Privacy maskingYes
Image sensor
Progressive scanYes
Sensor typeCMOS
Number of sensors-
Optical sensor size1/1.8 "
Camera
Minimum illumination0 lx
Camera shutter speed1 - 1/100000 s
Tilt angle range0 - 70 °
Pan range0 - 355 °
Angle of rotation355 °
Camera pan control-
Camera tilt control-
Performance
Wide Dynamic Range (WDR)Yes
TypeIP security camera
Placement supportedIndoor & outdoor
Day/night modeYes
Infrared (IR) cut-off filterYes
Connectivity technologyWired
Audio
Audio formats supportedG.711, G.722.1, G.726, MP2L2
Network
Supported network protocolsTCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour
Quality of Service (QoS) supportYes
Networking standardsIEEE 802.1x, IEEE 802.3af
Ethernet LANYes
Wi-Fi-
Bluetooth-
Ethernet interface typeFast Ethernet
Cabling technology10/100Base-T(X)
Security
Anti-flickerYes
HeartbeatYes
MirrorYes
Digital watermarkYes
Password protectionYes
IP address filteringYes
Video motion detectionYes
Active tampering alarmYes
Ports & interfaces
HDMI ports quantity1
Ethernet LAN (RJ-45) ports1
InterfaceRJ-45
Storage
Card reader integratedYes
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, MicroSDXC
Built-in HDD-
Maximum memory card size128 GB
Management features
Reset buttonYes
Behavior analysisIntrusion detection, Line crossing detection, Object removal detection, Unattended baggage detection
Operational conditions
Operating temperature (T-T)-30 - 60 °C
Operating relative humidity (H-H)0 - 95 %
Power
Power over Ethernet (PoE)Yes
DC output voltage12
Power source typeDC, PoE
Power consumption (max)9 W
Power consumption (Power over Ethernet (PoE))10 W
Design
WeatherproofYes
International Protection (IP) codeIP66
Form factorDome
Product colorWhite
Mounting typeCeiling
Weight & dimensions
Height133.5 mm
Diameter145.96 mm
Weight1200 g
Night vision
Night visionYes
LED typeIR
Packaging content
Number of cameras1
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hikvision DS-2CD4D26FWD-IZM below.

What is the weight of the Hikvision DS-2CD4D26FWD-IZM?

The Hikvision DS-2CD4D26FWD-IZM has a weight of 1200 g.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

What is the height of the Hikvision DS-2CD4D26FWD-IZM?

The Hikvision DS-2CD4D26FWD-IZM has a height of 133.5 mm.

Is the manual of the Hikvision DS-2CD4D26FWD-IZM available in English?

Yes, the manual of the Hikvision DS-2CD4D26FWD-IZM is available in English .

Is your question not listed? Ask your question here

No results