3.Select the Region from the drop-down list for detection settings.
4.Click Area Settings and click Draw Area to start the area drawing.
5.Click on the live video to specify the four vertexes of the detection region, and
right click to complete drawing.
6.Set the Max. Size and Min. Size for valid targets. Targets smaller or larger than
the valid target size are not able to trigger detection.
Max. Size: The maximum size of a valid target. Targets with larger sizes would
not trigger detection.
Min. Size: The minimum size of a valid target. Targets with smaller sizes would
not trigger detection.
7.Click Stop Drawing when finish drawing.
8.Set the time threshold and detection sensitivity for unattended baggage detection.
Threshold: Range [5-100s], the threshold for the time of the objects left over in
the region. If you set the value as 10, alarm is triggered after the object is left and
stay in the region for 10s.
9.Drag the slider to set the sensitivity value.
Sensitivity: Range [1-100]. It stands for the percentage of the body part of an
acceptable target that goes across the pre-defined line.
Sensitivity = S1/ST*100
S1 stands for the target body part that goes across the pre-defined line. ST stands
for the complete target body.
Example: if you set the value as 60, the action can be counted as a line crossing
action only when 60 percent or more body part goes across the line.
Note: The Sensitivity of the detection is supported by certain models. Refer to
actual display for details.
10.Repeat the above steps to configure other regions. Up to 4 regions can be set. You
can click the Clear button to clear all pre-defined regions.
11.Click Arming Schedule to set the arming schedule.
12.Click Linkage Method to select the linkage methods.
Manual
View the manual for the Hikvision DS-2CD4D26FWD-IZM here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-2CD4D26FWD-IZM or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hikvision DS-2CD4D26FWD-IZM below.
What is the weight of the Hikvision DS-2CD4D26FWD-IZM?
The Hikvision DS-2CD4D26FWD-IZM has a weight of 1200 g.
What is a megapixel?
The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.
What does the abbreviation 'MP' stand for?
MP stands for MegaPixels.
What is the height of the Hikvision DS-2CD4D26FWD-IZM?
The Hikvision DS-2CD4D26FWD-IZM has a height of 133.5 mm.
Is the manual of the Hikvision DS-2CD4D26FWD-IZM available in English?
Yes, the manual of the Hikvision DS-2CD4D26FWD-IZM is available in English .
Need help?
Do you have a question about the Hikvision and is the answer not in the manual?
Question and answer
Number of questions: 0