Hikvision DS-2CD2742FWD-I manual
- Number of pages: 165
- Filetype: PDF
Need help?
Number of questions: 0Do you have a question about the Hikvision DS-2CD2742FWD-I or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Hikvision DS-2CD2742FWD-I owners to properly answer your question.
Index
- Chapter 1 System Requirement
- ❯ Chapter 2 Network Connection
- ❯ Chapter 3 Access to the Network Camera
- ❯ Chapter 4 Wi-Fi Settings
- ❯ Chapter 5 Live View
- ❯ Chapter 6 Network Camera Configuration
- ❯ Chapter 7 Storage Settings
- Chapter 8 Counting
- Chapter 9 Road Traffic
- Chapter 10 Playback
- Chapter 11 Log Searching
- ❯ Chapter 12 Others
- ❯ Appendix
About the Hikvision DS-2CD2742FWD-I
View the manual for the Hikvision DS-2CD2742FWD-I here, for free. This manual comes under the category Security cameras and has been rated by 1 people with an average of a 9.9. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-2CD2742FWD-I or do you need help? Ask your question here
Hikvision DS-2CD2742FWD-I specifications
General
| Brand | Hikvision |
| Model | DS-2CD2742FWD-I |
| Product | Security camera |
| EAN | 6954273615062 |
| Language | English |
| Filetype |
Performance
| Type | IP security camera |
| Placement supported | Indoor & outdoor |
| Wide Dynamic Range (WDR) | ✓ |
| Day/night mode | ✓ |
| Infrared (IR) cut-off filter | ✓ |
| Connectivity technology | Wired |
Weight & dimensions
| Weight | 1000 g |
| Diameter | 140 mm |
| Height | 99.9 mm |
Night vision
| Night vision | ✓ |
| LED type | IR |
| Night vision distance | 30 m |
Design
| International Protection (IP) code | IP67 |
| Weatherproof | ✓ |
| Form factor | Dome |
| Product colour | White |
| Mounting type | Ceiling/wall |
Power
| Power over Ethernet (PoE) | ✓ |
| DC output voltage | 12 |
| Power consumption (max) | 5.5 W |
| Power source type | PoE |
Operational conditions
| Operating temperature (T-T) | -30 - 60 °C |
Network
| Networking standards | IEEE 802.3af |
| Ethernet LAN | ✓ |
| Wi-Fi | ✗ |
| Ethernet interface type | Fast Ethernet |
| Cabling technology | 10/100Base-T(X) |
| Supported network protocols | TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour |
Storage
| Card reader integrated | ✓ |
| Compatible memory cards | MicroSD (TransFlash),MicroSDHC,MicroSDXC |
| Built-in HDD | ✗ |
| Maximum memory card size | 128 GB |
Security
| Motion sensor | ✓ |
| Video motion detection | ✓ |
| Active tampering alarm | ✓ |
| IP address filtering | ✓ |
Packaging content
| Number of cameras | 1 |
Management features
| Reset button | ✓ |
Lens system
| Focal length range | 2.8 - 12 mm |
| Maximum aperture number | 1.4 |
Image sensor
| Sensor type | CMOS |
| Optical sensor size | 1/3 " |
| Progressive scan | ✓ |
Camera
| Camera shutter speed | 1/3 - 1/10000 s |
| Pan range | 0 - 355 ° |
| Tilt angle range | 0 - 75 ° |
| Angle of rotation | 355 ° |
| Minimum illumination | 0 lx |
Video
| Privacy masking | ✓ |
| Flip & mirror | ✓ |
| Image quality adjustment | Brightness,Contrast,Saturation,Sharpness |
| Frame rate | 30 fps |
| Noise reduction | ✓ |
| Maximum resolution | 2688 x 1520 pixels |
| Video compression formats | H.264,M-JPEG |
| Supported graphics resolutions | 1280 x 720 (HD 720),1920 x 1080 (HD 1080) |
| Total megapixels | 4 MP |
Ports & interfaces
| Ethernet LAN (RJ-45) ports | 1 |
| Interface | RJ-45 |
Related product manuals
Frequently Asked Questions
Below, you will find the most frequently asked questions about the Hikvision DS-2CD2742FWD-I.
Is your question not listed? Ask your question here