Hikvision DS-2CD2463G0-IW manual

Hikvision DS-2CD2463G0-IW
8.2 · 3
PDF manual
 · 193 pages
English
manualHikvision DS-2CD2463G0-IW
Network Camera User Manual
165
Record Parameters
Pre-record: The time you set to start recording before the scheduled time or
the event. For example, if an alarm triggers recording at 10:00, and the
pre-record time is set as 5 seconds, the camera starts to record at 9:59:55.
The Pre-record time can be configured as No Pre-record, 5s, 10s, 15s, 20s, 25s,
30s or not limited.
Post-record: The time you set to stop recording after the scheduled time or the
event. For example, if an alarm triggered recording ends at 11:00, and the
post-record time is set as 5 seconds, the camera records until 11:00:05.
The Post-record time can be configured as 5s, 10s, 30s, 1 min, 2 min, 5 min or
10 min.
Stream Type: Select the stream type for recording.
Note: The record parameter configurations vary depending on the camera model.
4. Select a Record Type. The record type can be Continuous, Motion Detection,
Alarm, Motion | Alarm, Motion & Alarm, and Event.
Continuous
If you select Continuous, the video will be recorded automatically according
to the time of the schedule.
Record Triggered by Motion Detection
If you select Motion Detection, the video will be recorded when the motion is
detected.
Besides configuring the recording schedule, you have to set the motion
detection area and check the checkbox of Trigger Channel in the Linkage
Method of Motion Detection Settings interface. For detailed information,

Manual

View the manual for the Hikvision DS-2CD2463G0-IW here, for free. This manual comes under the category security cameras and has been rated by 3 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-2CD2463G0-IW or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Hikvision and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Hikvision DS-2CD2463G0-IW specifications

Below you will find the product specifications and the manual specifications of the Hikvision DS-2CD2463G0-IW.

General
BrandHikvision
ModelDS-2CD2463G0-IW
Productsecurity camera
EAN6954273667337
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hikvision DS-2CD2463G0-IW below.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

Is the manual of the Hikvision DS-2CD2463G0-IW available in English?

Yes, the manual of the Hikvision DS-2CD2463G0-IW is available in English .

Is your question not listed? Ask your question here

No results