Hikvision DS-2CD2463G0-IW manual

Hikvision DS-2CD2463G0-IW
8.2 · 3
PDF manual
 · 193 pages
English
manualHikvision DS-2CD2463G0-IW
Network Camera User Manual
160
Note: Road traffic function varies according to different camera models.
Detection Configuration
Steps:
1. Select the detection type from the list. Vehicle Detection and Mixed-traffic
Detection are selectable.
Note: Reboot the device to activate the new settings when switching the detection
type of road traffic.
2. Check the checkbox of Enable to enable the selected detection function.
3. Select the lane number in the corresponding dropdown list. Up to 4 lanes are
selectable.
4. Click and drag the lane line to set its position, or click and drag the line end to
adjust the length and angle of the line.
5. Adjust the zoom ratio of the camera so that the size of the vehicle in the image is
close to that of the red frame. Only the position of red frame is adjustable.
Note: Only 1 license plate can be captured at one time for each lane.
6. Select a Province/State Abbreviation in the dropdown list when the attribution of
license plate cannot be recognized.
7. Set the Arming Schedule.
1) Click Arming Schedule to enter the arming schedule interface.
2) Click on the time bar and drag the mouse to select the time period. Click
delete or delete all to delete the configured schedule.
3) Move the mouse to the end of each day, a copy dialogue box pops up, and you
can copy the current settings to other days.
4) Click Save to save the settings.
Note: The time of each period cannot be overlapped. Up to 8 periods can be
configured for each day.
8. Set the linkage method. Notify surveillance center and upload to FTP/Memory
Card/NAS are selectable.
Notify Surveillance Center: Send an exception or alarm signal to remote
management software when an event occurs.

Manual

View the manual for the Hikvision DS-2CD2463G0-IW here, for free. This manual comes under the category security cameras and has been rated by 3 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-2CD2463G0-IW or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Hikvision and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Hikvision DS-2CD2463G0-IW specifications

Below you will find the product specifications and the manual specifications of the Hikvision DS-2CD2463G0-IW.

General
BrandHikvision
ModelDS-2CD2463G0-IW
Productsecurity camera
EAN6954273667337
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hikvision DS-2CD2463G0-IW below.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

Is the manual of the Hikvision DS-2CD2463G0-IW available in English?

Yes, the manual of the Hikvision DS-2CD2463G0-IW is available in English .

Is your question not listed? Ask your question here

No results