Hikvision DS-2CD2463G0-IW manual

Hikvision DS-2CD2463G0-IW
8.2 · 3
PDF manual
 · 193 pages
English
manualHikvision DS-2CD2463G0-IW
Network Camera User Manual
139
4. Set the Max. Size and Min. Size for valid targets. Targets smaller or larger than
the valid target size are not able to trigger detection.
Max. Size: The maximum size of a valid target. Targets with larger sizes would
not trigger detection.
Min. Size: The minimum size of a valid target. Targets with smaller sizes would
not trigger detection.
5. Set the detection area. Drag the line, and you can locate it on the live video as
desired.
6. Select the detection target. Human and vehicle are available. If the detection
target is not selected, all the detected targets will be reported, including the
human and vehicle.
7. Select the direction for line crossing detection. And you can select the directions
as A<->B, A ->B, and B->A.
A<->B: The object going across the plane with both directions can be detected and
alarms are triggered.
A->B: Only the object crossing the configured line from the A side to the B side
can be detected.
B->A: Only the object crossing the configured line from the B side to the A side
can be detected.
8. Drag the slider to set the sensitivity value.
Sensitivity: Range [1-100]. It stands for the percentage of the body part of an
acceptable target that goes across the pre-defined line.
Sensitivity = 100 S
1
/S
T
*100
S
1
stands for the target body part that goes across the pre-defined line. S
T
stands
for the complete target body.
Example: if you set the value as 60, the action can be counted as a line crossing
action only when 40 percent or more body part goes across the line.
Note: The Sensitivity of the detection is supported by certain models. Refer to
actual display for details.
9. Repeat the above steps to configure other lines. Up to 4 lines can be set. You can

Manual

View the manual for the Hikvision DS-2CD2463G0-IW here, for free. This manual comes under the category security cameras and has been rated by 3 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-2CD2463G0-IW or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Hikvision and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Hikvision DS-2CD2463G0-IW specifications

Below you will find the product specifications and the manual specifications of the Hikvision DS-2CD2463G0-IW.

General
BrandHikvision
ModelDS-2CD2463G0-IW
Productsecurity camera
EAN6954273667337
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hikvision DS-2CD2463G0-IW below.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

Is the manual of the Hikvision DS-2CD2463G0-IW available in English?

Yes, the manual of the Hikvision DS-2CD2463G0-IW is available in English .

Is your question not listed? Ask your question here

No results