Hikvision DS-2CD2165FWD-I manual

Hikvision DS-2CD2165FWD-I
5.2 · 1
PDF manual
 · 185 pages
English
manualHikvision DS-2CD2165FWD-I
Network Camera User Manual
68
3. Choose a friendly name for the camera, or you can use the default name.
4. Select the port mapping mode. Manual and Auto are selectable.
Note:
If you select Auto, you should enable UPnP™ function on the router.
If you select Manual, you can customize the value of the external port and
complete port mapping settings on router manually.
5. Click Save to save the settings.

Configure Advanced Settings

Purpose:
You can configure the parameters, including SNMP, FTP, Email, HTTPS, QoS,
802.1x, etc., by following the instructions in this section.

Configuring SNMP Settings

Purpose:
You can set the SNMP function to get camera status, parameters and alarm related
information, and manage the camera remotely when it is connected to the network.
Before you start:
Before setting the SNMP, please download the SNMP software and manage to
receive the camera information via SNMP port. By setting the Trap Address, the
camera can send the alarm event and exception messages to the surveillance center.
Note: The SNMP version you select should be the same as that of the SNMP software.
And you also need to use the different version according to the security level you
required. SNMP v1 provides no security and SNMP v2 requires password for access.
And SNMP v3 provides encryption and if you use the third version, HTTPS protocol
must be enabled.
For your privacy and to better protect your system against security risks, we

Manual

View the manual for the Hikvision DS-2CD2165FWD-I here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 5.2. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-2CD2165FWD-I or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Hikvision and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Hikvision DS-2CD2165FWD-I specifications

Below you will find the product specifications and the manual specifications of the Hikvision DS-2CD2165FWD-I.

General
BrandHikvision
ModelDS-2CD2165FWD-I | DS-2CD2165FWD-I(6MM)
Productsecurity camera
LanguageEnglish
FiletypeUser manual (PDF)
Image sensor
Progressive scanYes
Sensor typeCMOS
Number of sensors1
Optical sensor size1/2.4 "
Lens system
Fixed focal length6 mm
Fixed focusYes
Number of lenses1
Camera
60 °
38 °
Camera shutter speed1/3 - 1/100000 s
Pan range0 - 355 °
Tilt angle range0 - 75 °
Angle of rotation355 °
Camera pan controlYes
Camera tilt controlYes
Minimum illumination0.008 lx
Video
Back Light Compensation (BLC)Yes
Bit rate32 Kbps - 16 Mbps
Highlight Compensation (HLC)Yes
Region of Interest (ROI) encodingYes
Noise reduction technology3D noise reduction
Noise reductionYes
Image quality adjustmentBrightness, Contrast, Saturation, Sharpness
Frame rate30 fps
Supported graphics resolutions320 x 240,352 x 240,352 x 288,640 x 360,640 x 480 (VGA),1280 x 720 (HD 720),1920 x 1080 (HD 1080),2560 x 1440,2944 x 1656,3072 x 1728,3072 x 2048
Video compression formatsH.264, H.264+, H.265, H.265+, M-JPEG
Total megapixels6 MP
Maximum resolution3072 x 2048 pixels
Gain control typeAuto
Video streamingYes
Packaging content
Number of cameras1
Weight & dimensions
Package width134 mm
Package depth134 mm
Package height108 mm
Package weight800 g
Weight500 g
Height82.4 mm
Diameter111 mm
Night vision
Night visionYes
Night vision distance30 m
LED typeIR
Infra-red wavelength850 nm
Operational conditions
Operating temperature (T-T)-30 - 60 °C
Operating relative humidity (H-H)0 - 95 %
Power
DC output voltage12
DC output current0.5 A
Power consumption (max)6 W
Power consumption (Power over Ethernet (PoE))7.5 W
Power source typeDC, PoE
Management features
Behavior analysisIntrusion detection, Line crossing detection, Object removal detection, Unattended baggage detection
Web-based managementYes
Reset buttonYes
Security
Intelligent Video Surveillance (IVS) system featuresIntrusion
Ports & interfaces
Ethernet LAN (RJ-45) ports1
Design
Form factorDome
Mounting typeCeiling/wall
Product colorBlack, White
Housing materialMetal, Plastic
International Protection (IP) codeIP67
IK codeIK10
Storage
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, MicroSDXC
Built-in HDDNo
Card reader integratedYes
Maximum memory card size128 GB
Performance
Infrared (IR) cut-off filterYes
Wide Dynamic Range (WDR)Yes
Day/night modeYes
Placement supportedOutdoor
Connectivity technologyWired
TypeIP security camera
Network
Ethernet LANYes
Wi-FiNo
BluetoothNo
Ethernet interface typeFast Ethernet
Networking standardsIEEE 802.1x, IEEE 802.3af
Supported network protocolsTCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour
Quality of Service (QoS) supportYes
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hikvision DS-2CD2165FWD-I below.

What is the weight of the Hikvision DS-2CD2165FWD-I?

The Hikvision DS-2CD2165FWD-I has a weight of 500 g.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

What is the height of the Hikvision DS-2CD2165FWD-I?

The Hikvision DS-2CD2165FWD-I has a height of 82.4 mm.

Is the manual of the Hikvision DS-2CD2165FWD-I available in English?

Yes, the manual of the Hikvision DS-2CD2165FWD-I is available in English .

Is your question not listed? Ask your question here

No results