Hikvision DS-2CD2165FWD-I manual

Hikvision DS-2CD2165FWD-I
5.2 · 1
PDF manual
 · 185 pages
English
manualHikvision DS-2CD2165FWD-I
Network Camera User Manual
32
PBC Mode:
PBC refers to the Push-Button-Configuration, in which the user simply has to push a
button, either an actual or virtual one (as the button on the configuration
interface of the IE browser), on both the Access Point (and a registrar of the network)
and the new wireless client device.
1. Check the checkbox of to enable WPS.
2. Choose the connection mode as PBC.
Note: Support of this mode is mandatory for both the Access Points and the
connecting devices.
3. Check on the Wi-Fi router to see if there is a WPS button. If yes push the button
and you can see the indicator near the button start flashing, which means the WPS
function of the router is enabled. For detailed operation, please see the user guide of
the router.
4. Push the WPS button to enable the function on the camera.
If there is not a WPS button on the camera, you can also click the virtual button to
enable the PBC function on the web interface.
5. Click Connect button.
When the PBC mode is both enabled in the router and the camera, the camera and the
wireless network is connected automatically.
PIN Mode:
The PIN mode requires a Personal Identification Number (PIN) to be read from either
a sticker or the display on the new wireless device. This PIN must then be entered to
connect the network, usually the Access Point of the network.
Steps:
1. Choose a wireless connection on the list and the SSID is loaded automatically.
2. Choose Use route PIN code.

Manual

View the manual for the Hikvision DS-2CD2165FWD-I here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 5.2. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-2CD2165FWD-I or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Hikvision and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Hikvision DS-2CD2165FWD-I specifications

Below you will find the product specifications and the manual specifications of the Hikvision DS-2CD2165FWD-I.

General
BrandHikvision
ModelDS-2CD2165FWD-I | DS-2CD2165FWD-I(6MM)
Productsecurity camera
LanguageEnglish
FiletypeUser manual (PDF)
Image sensor
Progressive scanYes
Sensor typeCMOS
Number of sensors1
Optical sensor size1/2.4 "
Lens system
Fixed focal length6 mm
Fixed focusYes
Number of lenses1
Camera
60 °
38 °
Camera shutter speed1/3 - 1/100000 s
Pan range0 - 355 °
Tilt angle range0 - 75 °
Angle of rotation355 °
Camera pan controlYes
Camera tilt controlYes
Minimum illumination0.008 lx
Video
Back Light Compensation (BLC)Yes
Bit rate32 Kbps - 16 Mbps
Highlight Compensation (HLC)Yes
Region of Interest (ROI) encodingYes
Noise reduction technology3D noise reduction
Noise reductionYes
Image quality adjustmentBrightness, Contrast, Saturation, Sharpness
Frame rate30 fps
Supported graphics resolutions320 x 240,352 x 240,352 x 288,640 x 360,640 x 480 (VGA),1280 x 720 (HD 720),1920 x 1080 (HD 1080),2560 x 1440,2944 x 1656,3072 x 1728,3072 x 2048
Video compression formatsH.264, H.264+, H.265, H.265+, M-JPEG
Total megapixels6 MP
Maximum resolution3072 x 2048 pixels
Gain control typeAuto
Video streamingYes
Packaging content
Number of cameras1
Weight & dimensions
Package width134 mm
Package depth134 mm
Package height108 mm
Package weight800 g
Weight500 g
Height82.4 mm
Diameter111 mm
Night vision
Night visionYes
Night vision distance30 m
LED typeIR
Infra-red wavelength850 nm
Operational conditions
Operating temperature (T-T)-30 - 60 °C
Operating relative humidity (H-H)0 - 95 %
Power
DC output voltage12
DC output current0.5 A
Power consumption (max)6 W
Power consumption (Power over Ethernet (PoE))7.5 W
Power source typeDC, PoE
Management features
Behavior analysisIntrusion detection, Line crossing detection, Object removal detection, Unattended baggage detection
Web-based managementYes
Reset buttonYes
Security
Intelligent Video Surveillance (IVS) system featuresIntrusion
Ports & interfaces
Ethernet LAN (RJ-45) ports1
Design
Form factorDome
Mounting typeCeiling/wall
Product colorBlack, White
Housing materialMetal, Plastic
International Protection (IP) codeIP67
IK codeIK10
Storage
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, MicroSDXC
Built-in HDDNo
Card reader integratedYes
Maximum memory card size128 GB
Performance
Infrared (IR) cut-off filterYes
Wide Dynamic Range (WDR)Yes
Day/night modeYes
Placement supportedOutdoor
Connectivity technologyWired
TypeIP security camera
Network
Ethernet LANYes
Wi-FiNo
BluetoothNo
Ethernet interface typeFast Ethernet
Networking standardsIEEE 802.1x, IEEE 802.3af
Supported network protocolsTCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour
Quality of Service (QoS) supportYes
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hikvision DS-2CD2165FWD-I below.

What is the weight of the Hikvision DS-2CD2165FWD-I?

The Hikvision DS-2CD2165FWD-I has a weight of 500 g.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

What is the height of the Hikvision DS-2CD2165FWD-I?

The Hikvision DS-2CD2165FWD-I has a height of 82.4 mm.

Is the manual of the Hikvision DS-2CD2165FWD-I available in English?

Yes, the manual of the Hikvision DS-2CD2165FWD-I is available in English .

Is your question not listed? Ask your question here

No results