Hikvision DS-2AE4215T-A manual

Hikvision DS-2AE4215T-A
6.8 · 1
PDF manual
 · 48 pages
English
manualHikvision DS-2AE4215T-A
HD-TVI Speed Dome User Manual
26
NUM PST DWELL SPD
1 0 6 30
2 0 6 30
3 0 6 30
4 0 6 30
5 0 6 30
6 0 6 30
7 0 6 30
DONE: OPEN QUIT: CLOSE
Figure 3-14 Edit the Patrol
(2) Click up/down direction buttons to choose the number and locate the preset to be edited.
(3) Click left/right direction buttons to position the cursor to the column of PRESET, DWELL and
SPEED. You can click the up/down direction buttons to set the value of preset number, dwell
time and patrol speed.
The presets you set for a patrol should be the ones that have been pre-defined by users.
The dwell time (15 to 800 seconds selectable, which are divided into 30 levels) is the
time that the speed dome stays on a certain preset; the patrol speed (level 1 to 40
selectable) is the scanning speed the speed dome switching between the presets.
(4) Follow the above steps to define the other presets for the selected patrol. You can configure
up to 32 presets in sequence for a patrol. Press IRIS+ to save the new settings or press IRIS-
to cancel and return to the previous menu.
4. Preview the patrol.
Move the cursor to PREVIEW and click IRIS+ to preview the current patrol. You can click IRS+
again to stop the preview.
5. Call the defined patrol.
You can call the special presets to call the defined patrol. E.g. call preset 35 to call patrol 1.
Please refer to Section 2.3 to find the corresponding preset number for each patrol.
6. Delete a patrol.
You can move the cursor to CLEAR PATH and click IRIS+ to delete the current patrol.
7. Define the dwell time when running the fast patrol.
If you call the No.46 preset to enable the fast patrol, the speed dome will run the patrol
automatically according to the route consists of the configured preset 1 to preset 32. And you
can set the Patrol-D time switches from one preset to the other. 5 s, 10 s, 20 s, 30 s, and 60 s are
selectable.

3.4.4 Configuring Patterns

Purpose:
A pattern is a memorized, repeatable series of pan, tilt, zoom and preset movements that can be
recalled by a command or automatically performed by a configured function (alarm, park, time task,

Manual

View the manual for the Hikvision DS-2AE4215T-A here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 6.8. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-2AE4215T-A or do you need help? Ask your question here

Need help?

Do you have a question about the Hikvision and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Hikvision DS-2AE4215T-A specifications

Below you will find the product specifications and the manual specifications of the Hikvision DS-2AE4215T-A.

General
BrandHikvision
ModelDS-2AE4215T-A | DS-2AE4215T-A
Productsecurity camera
LanguageEnglish
FiletypeUser manual (PDF)
Image sensor
Sensor typeCMOS
Number of sensors1
Optical sensor size1/2.8 "
Progressive scanYes
Number of effective pixels (H x V)1920 x 1080 pixels
Video
Maximum resolution1920 x 1080 pixels
Total megapixels2 MP
Analog signal format systemNTSC, PAL
Automatic gain controlYes
Gain control typeAuto/Manual
Back Light Compensation (BLC)Yes
Highlight Compensation (HLC)Yes
Full HDYes
Supported graphics resolutions1920 x 1080 (HD 1080)
Supported video modes1080p
Privacy maskingYes
Camera
Minimum illumination0.001 lx
White balanceATW, Auto, Indoor, Manual, Outdoor
Camera shutter speed1-1/10000 s
53.8 °
31.9 °
60.4 °
Pan range0 - 360 °
Pan speed100 °/sec
Pan preset speed100 °/sec
Tilt angle range5 - 90 °
Tilt speed80 °/sec
Tilt preset speed80 °/sec
Preset programs quantity256
Performance
Wide Dynamic Range (WDR)Yes
Day/night modeYes
Infrared (IR) cut-off filterYes
TypeCCTV security camera
Placement supportedIndoor & outdoor
PTZ controlYes
PTZ modes5 Pattern
Alarm input/outputYes
Connectivity technologyWired
PTZ protocolsPelco-P/D
Number of languages1
Languages supportEnglish
Lens system
Digital zoom16 x
Optical zoom15 x
Number of lenses1
Auto focusYes
FocusMotorized/Manual
Focal length range5 - 75 mm
Detect distance (tele)1.5 m
Detect distance (wide)0.01 m
Maximum aperture number3.5
Minimum aperture number1.6
Power
Power source typeAC
AC input voltage24 V
Power consumption (max)14 W
Operational conditions
Operating temperature (T-T)-30 - 65 °C
Operating relative humidity (H-H)0 - 90 %
Design
International Protection (IP) codeIP66
Form factorDome
Product colorBlack, White
Mounting typeCeiling
Packaging content
Number of cameras1
Weight & dimensions
Diameter180 mm
Height239.5 mm
Weight2000 g
Network
Ethernet LANNo
Wi-FiNo
BluetoothNo
Ports & interfaces
InterfaceBNC
Storage
Built-in HDDNo
Night vision
Night vision-
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hikvision DS-2AE4215T-A below.

What is the weight of the Hikvision DS-2AE4215T-A?

The Hikvision DS-2AE4215T-A has a weight of 2000 g.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

What is the height of the Hikvision DS-2AE4215T-A?

The Hikvision DS-2AE4215T-A has a height of 239.5 mm.

Is the manual of the Hikvision DS-2AE4215T-A available in English?

Yes, the manual of the Hikvision DS-2AE4215T-A is available in English .

Is your question not listed? Ask your question here

No results