Hikvision DS-2AE4215T-A manual

Hikvision DS-2AE4215T-A
6.8 · 1
PDF manual
 · 48 pages
English
manualHikvision DS-2AE4215T-A
HD-TVI Speed Dome User Manual
23
If no control signal is received after the park time under the following circumstances, no park
actions will be performed: in the process of performing dome actions by calling special presets;
or in the process of performing external alarm linkage actions.
Image freeze
This feature enables the live view to switch directly from the current scene to another scene that is
defined by a preset, without showing the middle areas between these two scenes. It reduces the
use of bandwidth in a digital network system and it also provides privacy protection for the middle
areas.
You can set IMAGE FREEZE as ON or OFF to enable or disable this function.
The function varies according to the different camera models.
PTZ speed
Purpose:
You can define the speed of the dome movements.
(1) DOME SPEED: The manual movement speed of the dome can be set from level 1 to 10.
(2) SCAN SPEED: The scan speed defines the scan degree per second of pan scan, tilt scan, and
panoramic scan. The scan speed is adjustable from level 1 to level 40 and the higher the level is,
the faster the scan speed is.
(3) PRESET SPEED: The speed of calling a preset can be set from level 1 to 8. The higher level
corresponds to the faster speed to call a preset.
Setting Limits
Purpose:
The limits are user-configurable positions which limit the panning and tilting area of the speed
dome. There are left, right, up and down limits to define an area.
Steps:
1. Move the cursor to ENABLE LIMIT and click FOCUS+ to set it ON to enable this feature. Click
IRIS+ to confirm the new settings.
2. Move the cursor to SETTING STOPS and click IRIS+. You will see the message SET LEFT LIMIT on
the screen.
3. Click the direction buttons in the PTZ panel to configure the left limit. Click IRIS+ to confirm the
new settings.
4. Follow the prompts to configure the right, up and down limits on the menu.
The new limit will overwrite the existed ones by default.
5. You can clear the defined limits. Click IRIS+ to enter CLEAR LIMITS and click IRIS+ again to clear
the stops.

Manual

View the manual for the Hikvision DS-2AE4215T-A here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 6.8. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-2AE4215T-A or do you need help? Ask your question here

Need help?

Do you have a question about the Hikvision and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Hikvision DS-2AE4215T-A specifications

Below you will find the product specifications and the manual specifications of the Hikvision DS-2AE4215T-A.

General
BrandHikvision
ModelDS-2AE4215T-A | DS-2AE4215T-A
Productsecurity camera
LanguageEnglish
FiletypeUser manual (PDF)
Image sensor
Sensor typeCMOS
Number of sensors1
Optical sensor size1/2.8 "
Progressive scanYes
Number of effective pixels (H x V)1920 x 1080 pixels
Video
Maximum resolution1920 x 1080 pixels
Total megapixels2 MP
Analog signal format systemNTSC, PAL
Automatic gain controlYes
Gain control typeAuto/Manual
Back Light Compensation (BLC)Yes
Highlight Compensation (HLC)Yes
Full HDYes
Supported graphics resolutions1920 x 1080 (HD 1080)
Supported video modes1080p
Privacy maskingYes
Camera
Minimum illumination0.001 lx
White balanceATW, Auto, Indoor, Manual, Outdoor
Camera shutter speed1-1/10000 s
53.8 °
31.9 °
60.4 °
Pan range0 - 360 °
Pan speed100 °/sec
Pan preset speed100 °/sec
Tilt angle range5 - 90 °
Tilt speed80 °/sec
Tilt preset speed80 °/sec
Preset programs quantity256
Performance
Wide Dynamic Range (WDR)Yes
Day/night modeYes
Infrared (IR) cut-off filterYes
TypeCCTV security camera
Placement supportedIndoor & outdoor
PTZ controlYes
PTZ modes5 Pattern
Alarm input/outputYes
Connectivity technologyWired
PTZ protocolsPelco-P/D
Number of languages1
Languages supportEnglish
Lens system
Digital zoom16 x
Optical zoom15 x
Number of lenses1
Auto focusYes
FocusMotorized/Manual
Focal length range5 - 75 mm
Detect distance (tele)1.5 m
Detect distance (wide)0.01 m
Maximum aperture number3.5
Minimum aperture number1.6
Power
Power source typeAC
AC input voltage24 V
Power consumption (max)14 W
Operational conditions
Operating temperature (T-T)-30 - 65 °C
Operating relative humidity (H-H)0 - 90 %
Design
International Protection (IP) codeIP66
Form factorDome
Product colorBlack, White
Mounting typeCeiling
Packaging content
Number of cameras1
Weight & dimensions
Diameter180 mm
Height239.5 mm
Weight2000 g
Network
Ethernet LANNo
Wi-FiNo
BluetoothNo
Ports & interfaces
InterfaceBNC
Storage
Built-in HDDNo
Night vision
Night vision-
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hikvision DS-2AE4215T-A below.

What is the weight of the Hikvision DS-2AE4215T-A?

The Hikvision DS-2AE4215T-A has a weight of 2000 g.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

What is the height of the Hikvision DS-2AE4215T-A?

The Hikvision DS-2AE4215T-A has a height of 239.5 mm.

Is the manual of the Hikvision DS-2AE4215T-A available in English?

Yes, the manual of the Hikvision DS-2AE4215T-A is available in English .

Is your question not listed? Ask your question here

No results