1.Move the cursor to FOCUS using the direction buttons and click IRIS+ to enter.
2.Click up/down direction buttons to set the focus mode to AF, MF or HAF.
AF (Auto-focus): The lens remains in focus during PTZ movements.
MF (Manual Focus): You need to adjust the focus with Focus+ and Focus- buttons manually.
HAF (Half-auto Focus): The speed dome focuses automatically only once after panning,
tilting and zooming.
3.Click IRIS+ button to save the settings.
Setting the focus limit
Purpose:
This function is used to limit the minimum focus distance. You can configure the focus limit
longer when the target is at a distance, to avoid the speed dome focusing on the objects close to
it; or configure the focus limit shorter when the target is near the speed dome, and avoid it
focuses on the objects father.
You can set FOCUS LIMTto1CM, 30 CM, 1M, 3M, 5M, and AUTO to make sure that the speed
dome focuses on the target.
The focus limit value varies according to the models of speed dome.
Task 2: Configure the zoom settings.
Setting the zoom limit
Purpose:
Zoom limit is a user-defined limitation of the zoom amount (Zoomamount=optical zoom× digital
zoom). If you set the zoom limit to the minimum value, the digital zoom will be invalid and the
optical zoom will reach the maximum value; if you set the zoom limit smaller, the digital zoom
will be enabled.
Steps:
1.Move the cursor to ZOOM LIMIT using the direction buttons and click IRIS+ to enter.
2.Click up/down direction buttons to choose the limit from 23, 46, 92, 184, and 368.
3.Click IRIS+ button to confirm.
Manual
View the manual for the Hikvision DS-2AE4215T-A here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 6.8. This manual is available in the following languages: English. Do you have a question about the Hikvision DS-2AE4215T-A or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hikvision DS-2AE4215T-A below.
What is the weight of the Hikvision DS-2AE4215T-A?
The Hikvision DS-2AE4215T-A has a weight of 2000 g.
What is a megapixel?
The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.
What does the abbreviation 'MP' stand for?
MP stands for MegaPixels.
What is the height of the Hikvision DS-2AE4215T-A?
The Hikvision DS-2AE4215T-A has a height of 239.5 mm.
Is the manual of the Hikvision DS-2AE4215T-A available in English?
Yes, the manual of the Hikvision DS-2AE4215T-A is available in English .
Need help?
Do you have a question about the Hikvision and is the answer not in the manual?
Question and answer
Number of questions: 0