Hifonics Zeus ZX82A manual

Hifonics Zeus ZX82A
9.9 · 1
PDF manual
 · 28 pages
English
manualHifonics Zeus ZX82A
BEDIENUNGSANLEITUNG
USER’S MANUAL
MODE D’EMPLOI
MANUALE D’USO
MANUAL DE USO

ACTIVE

SUBWOOFER

SYSTEM

ZX82A

Manual

View the manual for the Hifonics Zeus ZX82A here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 9.9. This manual is available in the following languages: English. Do you have a question about the Hifonics Zeus ZX82A or do you need help? Ask your question here

Need help?

Do you have a question about the Hifonics and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Hifonics Zeus ZX82A specifications

Below you will find the product specifications and the manual specifications of the Hifonics Zeus ZX82A.

General
BrandHifonics
ModelZeus ZX82A
Productnot categorized
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hifonics Zeus ZX82A below.

How should I route the audio and power supply cables to prevent interferences when installing the Hifonics Zeus ZX82A?

To prevent interferences when installing the Hifonics Zeus ZX82A, route the audio and power supply cables separately. Ideally, avoid routing them along the same side of the vehicle. Consider routing the power cable through the left side cable channel and the audio cables through the right side cable channel, or vice versa. This separation helps prevent interferences caused by crosstalk into the audio signal. Additionally, ensure the AUTO TURN ON switch is set to the ON position for proper functionality. Avoid using high level inputs and RCA inputs simultaneously to prevent damage to the device. By following these steps, you can effectively minimize interferences and ensure optimal performance of your Hifonics Zeus ZX82A amplifier.

What should I do if the AUTO TURN ON function is not working with my head unit while using the amplifier?

1. Check that the AUTO TURN ON switch on the amplifier is in the ON position. 2. Ensure that the HI LEVEL INPUT is connected correctly if you are not using the RCA inputs for AUDIO INPUT. 3. Verify that the head unit is equipped with "High Power" outputs, as the AUTO TURN ON function usually works with 90% of head units. 4. If the AUTO TURN ON function is still not working, consider using a delay turn-on module by connecting the remote lead of the amplifier to the source unit. 5. Avoid using the high level inputs and the RCA inputs simultaneously to prevent serious damage to the device. 6. If the issue persists, consult a mechanic to test the alternator and battery load to ensure the proper functioning of the vehicle's electrical system.

Is the manual of the Hifonics Zeus ZX82A available in English?

Yes, the manual of the Hifonics Zeus ZX82A is available in English .

Is your question not listed? Ask your question here

No results