View the manual for the Heco Music Style 900 here, for free. This manual comes under the category speakers and has been rated by 1 people with an average of a 9.9. This manual is available in the following languages: English. Do you have a question about the Heco Music Style 900 or do you need help? Ask your question here

Below you will find the product specifications and the manual specifications of the Heco Music Style 900.
| Brand | Heco |
| Model | Music Style 900 | 4029678459640 |
| Product | speaker |
| EAN | 4029678459640 |
| Language | English |
| Filetype | User manual (PDF), Datasheet (PDF) |
| Recommended usage | Universal |
| Suitable for outdoor use | - |
| Bass reflex | Yes |
| Product color | White |
| Housing material | - |
| Speaker type | 3.5-way |
| Audio output channels | 1.0 channels |
| Speaker placement | Floor |
| Number of drivers | - |
| Tweeter | Yes |
| Woofer | Yes |
| Tweeter diameter | 25 mm |
| Mid-range driver diameter | 170 mm |
| Woofer diameter | 170 mm |
| Number of mid-range drivers | 1 |
| Number of woofer drivers | 2 |
| Amplifier | - |
| Recommended amplifier power (max) | 300 W |
| Recommended amplifier power (min) | 30 W |
| RMS rated power | 170 W |
| Peak Music Power Output (PMPO) | 300 W |
| Frequency range | 25 - 40000 Hz |
| Impedance | 8 Ω |
| Sensitivity | 91 dB |
| Equalizer | - |
| Connectivity technology | Wired |
| Audio RCA inputs | 1 |
| Width | 225 mm |
| Depth | 353 mm |
| Height | 1130 mm |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Heco Music Style 900 below.
A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.
Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.
Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.
Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.
The Heco Music Style 900 has a height of 1130 mm.
The Heco Music Style 900 has a width of 225 mm.
The Heco Music Style 900 has a depth of 353 mm.
Yes, the Heco Music Style 900 has a tweeter. This means that it is capable of producing clear and detailed high-frequency sounds, enhancing the overall audio experience for the user.
The Heco Music Style 900 has one mid-range driver. Having a single mid-range driver allows for focused sound reproduction in the mid-frequency range.
The RMS rated power of the Heco Music Style 900 is 170 W. This indicates that the speaker can deliver a significant amount of power, resulting in a loud and impactful sound output.
Yes, the Heco Music Style 900 is designed to be placed on the floor. This positioning allows for optimal sound dispersion and a more immersive audio experience.
Yes, the Heco Music Style 900 features bass reflex technology. This means that it has a specialized port or vent to enhance the low-frequency response, resulting in deeper and more impactful bass sounds.
To properly connect the Heco Music Style 900 speaker to your audio system, follow these steps: 1. Use a good quality loudspeaker connection cable with a cross-section of at least 2.5 mm² for lengths up to 3 meters, or at least 4 mm² for lengths above 3 meters. Ensure that the cables for both channels are exactly the same length. 2. Turn off your amplifier or receiver before connecting or disconnecting the loudspeaker cables. 3. Position the Heco Music Style 900 speaker in its planned location and cut the cable to the right length. Strip 10-15 mm of insulation from the ends of the cables. 4. Twist the ends of the cables and insert them into the terminals on the speaker. Tighten the terminal screws firmly. 5. Ensure that the cables are connected in phase. Connect the black negative (-) terminals on the speaker to the negative (-) terminals on the amplifier, and the red positive (+) terminals on the speaker to the positive (+) terminals on the amplifier. Some speaker cables may have a colored strip or ridge to help with this. 6. Double-check all your connections before switching on the system. Make sure the terminal screws are tight and there are no short circuits caused by stray wire filaments. By following these steps, you can properly connect the Heco Music Style 900 speaker to your audio system and enjoy high-quality sound reproduction.
The recommended placement for the front and rear loudspeakers of the Heco Music Style 900 speaker is as follows: 1. Front Loudspeakers: - Position the front loudspeakers at ear height on the left and right of your television or main listening area. - Place them equidistant from the center of the television or main listening position. - Ensure that the front loudspeakers are facing towards the listening area, with the speaker drivers directed towards the listener. 2. Rear Loudspeakers: - Position the rear loudspeakers at ear height or slightly above on the left and right sides of the listening area. - Place them behind the listening position, facing towards the front of the room. - Aim the rear loudspeakers towards the listening area to create an immersive surround sound experience. 3. Maintain a balanced setup: - Ensure that the distance between the front and rear loudspeakers is approximately the same. - Avoid placing any obstructions between the loudspeakers and the listening area, as this can affect sound quality. By following these placement guidelines, you can optimize the performance of the Heco Music Style 900 speaker and enjoy a well-balanced and immersive audio experience.
Yes, you can bi-wire or bi-amp the Heco Music Style 900 speaker. Here are the steps to connect it for bi-wiring or bi-amping: 1. Start by removing the factory-installed metal strips that connect the positive and negative terminals on the speaker. These strips are for conventional 2-wire connection and need to be removed for bi-wiring or bi-amping. 2. For bi-wiring: - Connect a separate loudspeaker cable from the positive (+) terminal of your amplifier to the positive (+) terminal of the tweeter (high frequencies) on the Heco Music Style 900 speaker. - Connect another separate loudspeaker cable from the negative (-) terminal of your amplifier to the negative (-) terminal of the woofer (low frequencies) on the speaker. 3. For bi-amping: - Connect a separate power amplifier to the tweeter (high frequencies) terminals on the Heco Music Style 900 speaker. - Connect another separate power amplifier to the woofer (low frequencies) terminals on the speaker. - Ensure that each power amplifier is connected to the corresponding frequency range of the speaker. By following these steps, you can successfully bi-wire or bi-amp the Heco Music Style 900 speaker, allowing for improved sound reproduction quality.
To connect the Heco Music Style 900 speaker to an AV receiver, follow these steps: 1. Locate the speaker terminals on the back of the AV receiver. These terminals are usually labeled as "Speaker Out" or "Speaker Output." 2. Identify the positive (+) and negative (-) terminals on the AV receiver. They are typically color-coded or marked with a plus and minus sign. 3. Connect the speaker cables to the AV receiver. Ensure that the positive (+) terminal of the speaker cable is connected to the positive (+) terminal on the AV receiver, and the negative (-) terminal of the speaker cable is connected to the negative (-) terminal on the AV receiver. 4. Locate the speaker terminals on the back of the Heco Music Style 900 speaker. These terminals are usually labeled as "Speaker In" or "Speaker Input." 5. Connect the other end of the speaker cables to the Heco Music Style 900 speaker. Again, ensure that the positive (+) terminal of the speaker cable is connected to the positive (+) terminal on the speaker, and the negative (-) terminal of the speaker cable is connected to the negative (-) terminal on the speaker. 6. Repeat the above steps for the other speaker channels, if applicable. By following these steps, you can successfully connect the Heco Music Style 900 speaker to an AV receiver and enjoy high-quality audio playback.
To prevent the need for repairs and ensure the longevity of your Heco Music Style 900 speaker, follow these tips: 1. Use an amplifier with an appropriate output power that matches the specifications of the speaker. Avoid overdriving the speaker by exceeding its power handling capabilities. 2. Keep the sound controls, such as volume and tone adjustments, in the middle position or within the recommended range. Extreme settings can strain the speaker and potentially cause damage. 3. Avoid exposing the speaker to excessive heat or moisture. Keep it away from direct sunlight, radiators, or humid environments, as these conditions can affect the performance and durability of the speaker. 4. Handle the speaker with care during installation and relocation. Avoid dropping or mishandling the speaker, as physical damage can impact its functionality. 5. Regularly inspect the speaker for any signs of damage, such as loose connections, torn speaker cones, or damaged cables. Address any issues promptly to prevent further damage or deterioration. By following these tips, you can minimize the risk of repairs and ensure that your Heco Music Style 900 speaker continues to deliver optimal performance for an extended period.
Yes, the manual of the Heco Music Style 900 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Heco and is the answer not in the manual?
Question and answer
Number of questions: 0