Heco Direkt manual

Heco Direkt
8.7 · 2
PDF manual
 · 40 pages
English
manualHeco Direkt

DIREKT

BEDIENUNGSANLEITUNG/GARANTIEURKUNDE
OWNER’S MANUAL/WARRANTY DOCUMENT
MODE D’EMPLOI/CERTIFICAT DE GARANTIE

Manual

View the manual for the Heco Direkt here, for free. This manual comes under the category speakers and has been rated by 2 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Heco Direkt or do you need help? Ask your question here

Need help?

Do you have a question about the Heco and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Heco Direkt specifications

Below you will find the product specifications and the manual specifications of the Heco Direkt.

General
BrandHeco
ModelDirekt
Productspeaker
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Heco Direkt below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

How do I properly set up the Heco Direkt speaker for optimal sound reproduction?

To properly set up the Heco Direkt speaker for optimal sound reproduction, follow these steps: 1. Positioning: Set up the Heco Direkt speaker in a free-standing position at a light angle to the listening location. The angle of the speakers can influence the sound. A greater angle makes the sound more direct and present, while a lesser angle emphasizes the three-dimensionality. Ideally, the speakers and the listening position should form an equilateral triangle. 2. Line of Sight: Ensure there is a clear line of sight between the loudspeakers and the listening position. Any sound-absorbing or reflecting obstacles in the path can distort the sound. 3. Feet and Spikes: Attach the feet provided with the Heco Direkt speaker. Place the loudspeaker on its top on a scratch-free surface and secure the feet with screws. The feet are delivered with soft silicone feet, which are ideal for vibration-prone floors. For hard floors, use the spikes provided. Screw the spikes into the threaded sleeves at the bottom of the speaker. The spikes help achieve a firm stand and decouple the loudspeakers from the base to avoid undesirable resonance. By following these steps, you can properly set up the Heco Direkt speaker for optimal sound reproduction.

What is the recommended angle for positioning the Heco Direkt speaker?

The recommended angle for positioning the Heco Direkt speaker is to set it up in a free-standing position at a light angle to the listening location. The angle of the speakers can influence the sound reproduction. To achieve the optimal angle, follow these steps: 1. Find the Listening Position: Determine the ideal listening position in your room where you will be sitting to enjoy the sound from the Heco Direkt speaker. 2. Position the Speakers: Place the Heco Direkt speakers on either side of the listening position. The speakers should be positioned at a light angle, forming an equilateral triangle with the listening position. This means that the distance between each speaker and the listening position should be the same as the distance between the two speakers. 3. Adjust the Angle: Experiment with the angle of the speakers to find the best sound reproduction. You can try adjusting the angle slightly to see how it affects the sound. A greater angle makes the sound more direct and present, while a lesser angle emphasizes the three-dimensionality. By following these steps, you can position the Heco Direkt speaker at the recommended angle for optimal sound reproduction.

How do I attach the feet and secure them with screws on the Heco Direkt speaker?

To attach the feet and secure them with screws on the Heco Direkt speaker, follow these steps: 1. Unpack the Feet: Locate the separate package containing the feet for the Heco Direkt speaker. 2. Place the Speaker: Position the loudspeaker on its top on a scratch-free surface, such as a carpet. 3. Attach the Feet: Take one foot at a time and secure it to the bottom of the speaker using two screws. Refer to Fig. 2a and 2b in the manual for visual guidance. 4. Repeat for Other Feet: Attach the remaining feet to the speaker using the same method. 5. Turn the Speaker: Once all the feet are securely attached, carefully turn the speaker around. 6. Set Up the Speaker: With the help of another person, set up the Heco Direkt speaker in its desired location. The feet provided with the speaker are delivered with soft silicone feet. These feet are ideal for separating the loudspeakers from vibration-prone floors. However, if you have hard floors, such as stone or concrete, you should use the spikes provided. The spikes are height-adjustable and possess a counter nut. They not only provide a firm stand but also decouple the loudspeakers from the base to avoid undesirable resonance. By following these steps, you can attach the feet and secure them with screws on the Heco Direkt speaker.

When should I use the soft silicone feet and when should I use the spikes on the Heco Direkt speaker?

You should use the soft silicone feet provided with the Heco Direkt speaker when you have vibration-prone floors, such as wooden or laminate floors. The soft silicone feet help to decouple the speaker from the floor, reducing the transmission of vibrations and minimizing any unwanted resonance. On the other hand, you should use the spikes provided with the Heco Direkt speaker when you have hard floors, such as stone or concrete. The spikes are designed to provide a firm stand for the speaker on these types of surfaces. They also help to further isolate the speaker from the floor, preventing any vibrations from affecting the sound quality. To summarize: 1. Use the soft silicone feet when you have vibration-prone floors. 2. Use the spikes when you have hard floors. By using the appropriate feet or spikes based on your floor type, you can ensure that the Heco Direkt speaker is properly supported and optimized for the best sound performance.

What is the warranty period for the Heco Direkt speaker?

The warranty period for the Heco Direkt speaker is 5 years. This means that Heco provides a warranty for any material or manufacturing defects that may occur within 5 years from the date of purchase. During this warranty period, Heco will rectify any defects by either replacing or repairing the defective parts, at their discretion. It is important to note that the warranty is applicable only to the original owner of the Heco Direkt speaker. Unauthorized tampering with the equipment will invalidate the warranty. To claim warranty service, it is recommended to first contact your authorized dealer. If necessary, the speaker may need to be returned to the factory for repair or replacement. When returning the speaker, ensure that it is packed in its original factory packaging and include the quality control card and proof of purchase. Please be aware that the warranty does not cover certain items, such as illuminates, wear parts, shipping damages, scratches on metal parts, and damages caused by improper setup, incorrect connection, or unauthorized repairs. By understanding the warranty period and its terms, you can ensure proper coverage for your Heco Direkt speaker.

How do I claim warranty service for the Heco Direkt speaker?

To claim warranty service for the Heco Direkt speaker, follow these steps: 1. Contact the Authorized Dealer: If you encounter any issues with your Heco Direkt speaker within the warranty period, the first step is to contact the authorized dealer from whom you purchased the speaker. Provide them with the necessary details, such as the date of purchase and the nature of the problem. 2. Provide Proof of Purchase: The authorized dealer may require you to provide proof of purchase, such as a receipt or invoice, to validate your warranty claim. Make sure to keep your purchase documents in a safe place for easy access. 3. Follow the Dealer's Instructions: The authorized dealer will guide you through the warranty claim process. They may request additional information or ask you to bring the speaker to their service center for inspection and repair. 4. Packaging and Shipment: If the authorized dealer determines that the speaker needs to be returned for repair or replacement, they will provide instructions on how to package and ship the speaker safely. Follow their guidelines to ensure the speaker is protected during transit. 5. Await Resolution: Once the authorized dealer receives the speaker, they will assess the issue and take appropriate action to rectify the problem. This may involve repairing or replacing the defective parts. By following these steps and working with the authorized dealer, you can claim warranty service for your Heco Direkt speaker and have any eligible issues resolved within the warranty period.

What items are excluded from the warranty coverage for the Heco Direkt speaker?

The items excluded from the warranty coverage for the Heco Direkt speaker are as follows: 1. Illuminates: The warranty does not cover any issues related to illuminates, such as light bulbs or LED indicators. 2. Wear Parts: Components that are subject to normal wear and tear, such as foam surrounds or speaker grilles, are not covered by the warranty. 3. Shipping Damages: Any damages that occur during shipping, whether they are readily apparent or concealed, are not covered by the warranty. It is important to file a claim with the transport company immediately if such damages occur. 4. Scratches on Metal Parts: Any scratches or damages to metal parts, front covers, or similar components must be reported to the dealer within 5 days of purchase to be eligible for warranty coverage. 5. Improper Setup, Connection, or Operation: Issues that arise from improper setup, incorrect connection, or unsuitable operation, as outlined in the user manual, are not covered by the warranty. 6. Unauthorized Repairs or Modifications: Any damages caused by unauthorized repairs or modifications performed by someone other than Heco will void the warranty. 7. Damages to Other Devices: The warranty does not cover any consequential damages to other devices or equipment. 8. Cost Reimbursement: Any costs incurred for repairs or damages caused by third parties without prior consent from Heco will not be reimbursed. By understanding these exclusions, you can have a clear understanding of what is not covered by the warranty for the Heco Direkt speaker.

Is the manual of the Heco Direkt available in English?

Yes, the manual of the Heco Direkt is available in English .

Is your question not listed? Ask your question here

No results