3.Select the desired the remote contact and click Enter softkey.
4.Click the Search softkey, you can enter the desired part of name or part of number.
5.Click Ok softkey, then with the search content to match the contact will be displayed on the
LCD.
Note:
If you don’t click the OK softkey, then IP Phone will display the relevant contacts automatically
within 5 seconds
To search contact in LDAP contacts:
1.Click the LDAP function key.
2.Enter the first character or more of contact’s name.
3.Select the desired the remote contact and click Enter softkey.
4.Then IP Phone will display the relevant contacts automatically within Search Delay.
Call History Settings
Call History
This phone maintains call history lists of Dialed Calls, Received Calls, Missed Calls and Forwarded
Calls. The call history list supports up to100 entries in all on phone interface and more than 1500
items. You can check the call history, dial a call, add a contact or delete an entry from the call
history list. You should enable the history record feature in advance.
To enable the history record feature via phone interface:
1.Press MenuFeatureHistory Setting
2.Press and or Switch soft key to enable History record.
3.Press Save soft key to save the configuration.
To check the call history via phone interface:
1.Press the History soft key. The LCD screen displays All Calls list.
2.Press Right or Left Key to switch among All Calls, Missed Calls, Received Calls, Dialed Calls
and Forwarded Calls.
3.Press to select the desired entry.
Manual
View the manual for the HanlongHanlong UC912P here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 8.8. This manual is available in the following languages: English. Do you have a question about the HanlongHanlong UC912P or do you need help? Ask your question here
Need help?
Do you have a question about the HanlongHanlong and is the answer not in the manual?
Question and answer
Number of questions: 0