To use the zero touch feature on the user interface:
1.Press the zero touch key when the IP Phone is idle.
2.The IP Phone will enter the WAN Port interface, you can change the WAN Type by pressing
the Navigation keys.
3.Press the Next softkey to enter Network interface, then you can configure some information.
4.Press the Next softkey again, you can configure auto provision information.
5.When you finish the setting, you can press the OK to accept the changes.
Note:
This feature is not available on all servers. For more information, contact your system
administrator.
Multicast Paging
You can use multicast paging to quickly and easily forward out time sensitive announcements to
people within the multicast group. You can configure a multicast paging key or a paging list key
on the phone, which allows you to send a Real Time Transport Protocol (RTP) stream to the
pre-configured multicast address(es) without involving SIP signaling. You can configure the phone
to receive an RTP stream from pre-configured multicast listening address(es) without involving
SIP signaling. You can specify up to 10 multicast listening addresses.
Sending RTP Stream
To configure a multicast paging key via phone interface
1.Press Menu→Feature →Line Key→Line Key1(e.g.)
2.Press and or switch key to select the multicast paging in the type field.
3.Enter the multicast IP address and port number (e.g., 224.5.6.20:2000) in the Value field.
4.The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
5.Press or Save soft key to save the configuration
To configure a multicast paging key via web interface
Manual
View the manual for the HanlongHanlong UC912P here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 8.8. This manual is available in the following languages: English. Do you have a question about the HanlongHanlong UC912P or do you need help? Ask your question here
Need help?
Do you have a question about the HanlongHanlong and is the answer not in the manual?
Question and answer
Number of questions: 0