View the manual for the Güde GHD 135 here, for free. This manual comes under the category pressure washers and has been rated by 1 people with an average of a 7. This manual is available in the following languages: English. Do you have a question about the Güde GHD 135 or do you need help? Ask your question here
| Brand | Güde |
| Model | GHD 135 |
| Product | pressure washer |
| EAN | 4015671750808 |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Güde GHD 135 below.
To start the Güde GHD 135 pressure washer, follow these steps: 1. Ensure that the pressure washer is connected to a power source with a service connection of 230V~50Hz. 2. Familiarize yourself with the control elements and safety measures stated in the service manual. 3. Make sure that the machine is not being used by children or individuals with reduced physical, sensory, or mental capabilities unless supervised by a responsible person. 4. Position the pressure washer in a suitable location, ensuring that it is stable and secure. 5. Connect the water supply hose to a water source with a maximum intake pressure of 4 bar/0.4 MPa. 6. Attach the high-pressure hose to the pressure washer and the spray gun to the other end of the hose. 7. Turn on the water supply and check for any leaks. 8. Press the power button to turn on the pressure washer. 9. Adjust the pressure settings according to your cleaning needs using the control knob. 10. Aim the spray gun away from people, active electrical equipment, and the machine itself. 11. Squeeze the trigger on the spray gun to start the water flow and begin cleaning. 12. Release the trigger to stop the water flow. Remember to always follow the safety instructions and guidelines provided in the manual to ensure safe and proper operation of the Güde GHD 135 pressure washer.
If the Güde GHD 135 pressure washer does not start up, there are several steps you can take to troubleshoot the issue: 1. Check the plug: Ensure that the plug is securely connected to the power source. If it is not, connect it properly. 2. Check the outlet: Verify that the outlet you are using is functioning correctly. If it is defective, try using a different outlet. 3. Check the fuse: If the pressure washer still does not start, the fuse may have blown. Replace the fuse with a new one. 4. Check the extension cord: If you are using an extension cord, it may be damaged. Try using the pressure washer without the extension cord to see if that resolves the issue. 5. Check the motor: If the motor stops running, it could be due to a blown fuse. Replace the fuse if necessary. Also, check the mains voltage to ensure it is correct. If the pressure washer still does not start after following these steps, it is recommended to seek assistance from an authorized specialist.
To store the Güde GHD 135 pressure washer, follow these steps: 1. Make sure the pressure washer is completely turned off and disconnected from the power source. 2. Clean the pressure washer thoroughly, removing any dirt or debris from the exterior. 3. Drain any remaining water from the pressure washer by releasing the pressure and removing the water hose. 4. Check the detergent tank and remove any leftover detergent. Rinse the tank with clean water if necessary. 5. Store the pressure washer in a dry and well-ventilated area to prevent moisture buildup. 6. Keep the pressure washer in an upright position to avoid any leaks or damage to the internal components. 7. If possible, cover the pressure washer with a protective cover to shield it from dust and other environmental elements. 8. Store any accessories or attachments, such as nozzles or hoses, in a separate container or bag to keep them organized and easily accessible. 9. Regularly inspect the pressure washer for any signs of damage or wear and address any issues before storing it. By following these steps, you can ensure that your Güde GHD 135 pressure washer is stored properly and ready for future use.
When transporting the Güde GHD 135 pressure washer, follow these steps: 1. Before moving the pressure washer, make sure it is turned off and disconnected from the power source. 2. Release any built-up pressure by squeezing the trigger on the spray gun until no water comes out. 3. Secure the spray gun and any accessories, such as nozzles or hoses, to prevent them from getting damaged during transport. 4. If the pressure washer has a fuel tank, ensure it is empty or close the fuel valve to prevent leaks. 5. Lift the pressure washer using the designated handles or grips. Avoid lifting it by the hose or power cord. 6. When carrying the pressure washer, keep it in an upright position to prevent fuel or oil from spilling. 7. Use caution when navigating stairs or uneven surfaces to maintain stability. 8. Place the pressure washer in a secure location in your vehicle, ensuring it is not at risk of tipping over or shifting during transport. 9. When unloading the pressure washer, reverse the steps and carefully place it in its desired location. By following these steps, you can safely transport the Güde GHD 135 pressure washer without any issues.
Yes, the manual of the Güde GHD 135 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Güde and is the answer not in the manual?
Question and answer
Number of questions: 0