View the manual for the Grundig HS 5523 here, for free. This manual comes under the category stylers and has been rated by 2 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Grundig HS 5523 or do you need help? Ask your question here


Below you will find the product specifications and the manual specifications of the Grundig HS 5523.
| Brand | Grundig |
| Model | HS 5523 | HS 5523 |
| Product | styler |
| EAN | 4013833621522 |
| Language | English |
| Filetype | User manual (PDF) |
| Ionic function | No |
| Number of heating levels | 2 |
| Ceramic heating system | Yes |
| Number of speeds | 2 |
| Type | Hot air brush |
| Hair straightening | - |
| Hair curling | Yes |
| Hair texturizing | No |
| Hair drying | - |
| Technology | Warm |
| Adjustable thermostat | - |
| Power | 1100 W |
| Number of batteries supported | 3 |
| Cord length | 1.8 m |
| Swivel cord | Yes |
| Built-in display | No |
| On/off switch | Yes |
| Auto power off | - |
| Cordless | - |
| Hair care accessories | Brush |
| Cool tip | Yes |
| Product color | Blue, Silver |
| Hangable | Yes |
| Hanging type | Hanging loop |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Grundig HS 5523 below.
No, the Grundig HS 5523 does not have an ionic function. This means that it may not provide the same anti-frizz and smoothing effects as styler with an ionic function.
The Grundig HS 5523 has 2 heating levels. This allows the user to adjust the temperature according to their hair type and desired styling.
Yes, the Grundig HS 5523 does have a ceramic heating system. This feature helps to distribute heat evenly and prevent hotspots, resulting in better styling results and less damage to the hair.
The Grundig HS 5523 has a power of 1100 W. This is considered to be a moderate power level, which should be sufficient for most hair types and styling needs.
Yes, the Grundig HS 5523 has a swivel cord. This means that the cord can rotate freely, making it easier to maneuver the styler and preventing tangling during use.
To adjust the temperature and blower settings on the Grundig HS 5523 styler, follow these steps: 1. Make sure the styler is plugged into a power source and the mains voltage matches your local supply. 2. Thoroughly towel dry your hair after washing. 3. Locate the switch on the styler, labeled as "C." Turn on the appliance by flipping the switch to the "on" position. 4. The styler offers different temperature and blower settings. The temperature levels are indicated as follows: - 0: Off - 1: Gentle air flow and moderate temperature for gentle drying and styling - 2: Strong air current, high temperature for quick drying and styling 5. Choose the desired temperature level by adjusting the switch to the corresponding number. 6. The blower levels are adjusted simultaneously with the temperature levels. 7. If necessary, you can interrupt the heating process by pressing and holding the "G" button, labeled as "Cool Shot." This will provide a cool air flow. 8. After use, switch off the appliance by turning the switch to the "off" position and unplug the mains cable from the socket. Remember to never wind the mains cable around the styler, as this can cause damage. Regularly check the appliance and cable for any visible damage.
If the Grundig HS 5523 styler is not turning on when you press the power switch, you can try the following steps to troubleshoot the issue: 1. Check the mains voltage: Ensure that the mains voltage on the type plate, located on the handle of the device, corresponds to your local mains supply. 2. Verify the power source: Make sure the styler is properly plugged into a functioning wall socket. 3. Confirm the switch position: Double-check that the switch (labeled as "C") is in the "on" position. 4. Check for detached styling attachment: If the styler still doesn't turn on, ensure that the styling attachment is securely attached. Detach the attached styling attachment by pressing on the catch (located on the back of the appliance) and turning the hot air brush slightly to the right. Then, place another styling attachment on, aligning the recess and the catch, and turning it slightly to the left until it clicks. 5. Test with Cool Shot: If none of the above steps resolve the issue, try pressing and holding down the "G" button (Cool Shot) to interrupt heating and provide a cool air flow. If the styler turns on with the Cool Shot feature, there may be an issue with the temperature and blower settings. If the problem persists after following these steps, it is recommended to contact Grundig customer support for further assistance.
To attach and detach the heated brushes on the Grundig HS 5523 styler, follow these steps: 1. Ensure that the styler is turned off and unplugged from the power source for safety. 2. Locate the styling attachment release catch on the back of the styler. It is a small button or lever that allows you to release the attachment. 3. Press and hold the styling attachment release catch while gently turning the heated brush to the right. This will unlock the attachment from the styler. 4. Once the attachment is unlocked, carefully remove it from the styler by pulling it straight out. 5. To attach a heated brush, align the recess on the back of the brush with the catch on the styler. 6. Insert the heated brush into the styler and turn it slightly to the left until it clicks into place. Ensure that it is securely attached. 7. Repeat the process for any additional heated brushes you want to attach. Remember to handle the heated brushes with care, as they may be hot during and after use. Always wait for the brushes to cool down before attempting to detach them from the styler.
If the hot air brushes on the Grundig HS 5523 styler are not heating up, you can try the following steps: 1. Check the temperature and blower settings: Ensure that the temperature and blower settings are properly adjusted. The styler offers different temperature levels (0: Off, 1: Gentle air flow and moderate temperature, 2: Strong air current and high temperature) and a Cool Shot feature (G) for cool air flow. Make sure the desired temperature level is selected. 2. Verify the power supply: Check if the styler is properly plugged into a functioning wall socket. Ensure that the mains voltage on the type plate, located on the handle of the device, matches your local mains supply. 3. Detach and reattach the styling attachment: If the brushes are still not heating up, detach the attached styling attachment by pressing the catch on the back of the appliance and turning the hot air brush slightly to the right. Then, place another styling attachment on, aligning the recess and the catch, and turning it slightly to the left until it clicks. This ensures a secure connection. 4. Test with a different styling attachment: If available, try using a different styling attachment to see if the issue is specific to a particular brush. This can help determine if the problem lies with the attachment itself. 5. Contact customer support: If the hot air brushes still do not heat up after following these steps, it is recommended to contact Grundig customer support for further assistance. They will be able to provide specific troubleshooting guidance or arrange for repairs if necessary.
To activate the Cool Shot feature on the Grundig HS 5523 styler, follow these steps: 1. Ensure that the styler is turned on and plugged into a power source. 2. Locate the "G" button on the styler. This button is specifically designated for the Cool Shot feature. 3. Press and hold down the "G" button while using the styler. This will activate the Cool Shot function. 4. While holding down the "G" button, you will experience a cool air flow from the styler. This is ideal for setting your hairstyle and providing a refreshing cool breeze. 5. Release the "G" button to stop the Cool Shot function. The styler will return to its regular temperature and blower settings. Remember to use the Cool Shot feature as needed during your styling routine. It is particularly useful for setting your hairstyle in place and providing a burst of cool air for added comfort.
Yes, the manual of the Grundig HS 5523 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Grundig and is the answer not in the manual?
Question and answer
Number of questions: 0