Gossen SC40-C manual

Gossen SC40-C
  • Number of pages: 2
  • Filetype: PDF
Technical Specifications
Safety and environmental conditions
CE marking
LV directive 2006/95/EC RoHS directive 2011/65/EU
EN-IEC 61010-2-032:2012 WEEE directive 2012/19/EU
This product is designed to be safe under the following conditions:
Location Altitude Ambient temperature Storage temperature Relative humidity Pollution degree Degree of protection
Indoor use Up to 2000 m -10 °C +55 °C -20 °C +70 °C 5% ... 85%, non condensing
Standard Rated short-time thermal current Rated dynamic current (Idyn) Rated continuous thermal current (Icth) Rated insulation level Rated frequency Class of insulation Material (housing)
IEC 61869-2:2012 (Ith): 60 x Ipr / 1s 2,5 x Ith
100% 0,72/3/-kV 50/60 Hz E (120 °C) PA 6.6, UL94: V2
The SC is only suitable for insulated primary conductors.
Specifications per type
Suitable for
cable (ø)
18 mm
18 mm
28 mm
42 mm
leads length
for 0,5 mm²
3 m
3 m
3 m
5 m
200 g
360 g
310 g
525 g
leads length
for 1,5 mm²
0,5 m
0,5 m
3 m
GMC-I Messtechnik GmbH reserves the right to carry out
modifications on its products, in order to improve them, without prior
Safety instruction
All activities for installation, commissioning and maintenance of this current transformer must be performed by qualified personnel that have the knowledge of applicable safety precautions. This guide assumes that the reader of this document has sufficient electro-technical knowledge to understand the content of this document.
The SC split-core is a current transformer (CT) and can only be used for measuring electrical alternating currents. The SC is suitable only for mounting on insulated primary conductors in a weather protected and dry location.
Explanation of symbols
This product is designed according to the
EN-IEC 61010-2-032:2012 standards and therefore
this product meets the requirements of the Low
Voltage Directive 2006/95/EC.
Do not apply around or remove from UNINSULATED
HAZARDOUS LIVE conductors, which may render
electric shock, electric burn, or arc flash.
Read the installation guide before mounting the
product. Unprofessional work activities on electrical
installations may result in a threat of danger to the life
and health of human beings and livestock!
Under no circumstances the secondary circuit of the
CT may be opened when the CT is closed and
current is flowing in the primary circuit. High voltages
may appear on the secondary leads when this circuit
is left open.
RoHS Directive 2011/65/EU
GMC-I Messtechnik GmbH states that they only uses
qualified component in their products from
manufacturers, whose specifications meet or exceed
the requirements of the European Directive for the
Restriction of use of certain Hazardous Substances.
WEEE Directive 2012/19/EU
The 'crossed out wheeled bin' symbol indicates that
the equipment should not be disposed as unsorted
municipal waste. Contact a qualified recycler for
Installation guide

SC30, SC40-B/-C, SC50-E

Split-Core Current Transformer

Read this installation guide before installing the product
Subject to change without notice • A pdf version is available on the Internet
GMC-I Messtechnik GmbH
Südwestpark 15
90449 Nürnberg ● Germany
Phone+49 911 8602-111
Fax +49 911 8602-777
E-Mail info@gossenmetrawatt.com
Gossen SC40-C

Need help?

Number of questions: 0

Do you have a question about the Gossen SC40-C or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Gossen SC40-C owners to properly answer your question.

View the manual for the Gossen SC40-C here, for free. This manual comes under the category Not categorized and has been rated by 1 people with an average of a 7.7. This manual is available in the following languages: English. Do you have a question about the Gossen SC40-C or do you need help? Ask your question here

Gossen SC40-C specifications

Brand Gossen
Model SC40-C
Product Not categorized
Language English
Filetype PDF
Operating class 0.5
Product colour Black
Cable diameter 28 mm
Number of positions 1
Certification CE, RoHS
Weight & dimensions
Width 57.2 mm
Depth 49 mm
Height 67 mm
Weight 310 g
Nominal current output 1 A
Nominal input voltage 720 - 3000 V
show more

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Gossen SC40-C.

Is your question not listed? Ask your question here