Goal Zero Sherpa 50 manual

Goal Zero Sherpa 50
7.5 · 1
PDF manual
 · 2 pages
English
manualGoal Zero Sherpa 50
Gebruikershandleiding
Neem contact met ons op:
Gratis: 888-794-6250
675 West 14600 South
Bluffdale, UT 84065
www.GOALZERO.com

Ken Uw Apparaat

DRAAGBARE OPLADER
Technische Specificaties
Gebruik:
Voor onderhoud levensduur batterij, aangesloten houden
ofof of elke 3-4 maanden opladen
Voor langdurige opslag, batterij 50% ontladen, zekering
verwijderen en bewaren op een koele, droge plek.
Opladen Uit: Oplaadtijd Bij Benadering:
AC Muuroplader 3 uur
GOAL ZERO Nomad 13.5 8-16 uur
Invoer
Oplaadpoort (blauw, cirkel) 14-25 V, tot 2A (30W max)
Uitvoer
USB poort 5 V, tot 1,5A (7,5 W max), gereguleerd
12V poort (groen) 12 V, tot 8A (100W max),
gereguleerd
Sidecar poort 9-13V, tot 10A (100W max),
gereguleerd
Lampje
USB
Oplaadpoort INVOER
Aan/Uit Schakelaar
12 Volt UITVOER
12 Volt/Laptop Switch
Laptop Poort UITVOER
AUTOSTOPCONTACT
Laptop poort (7,4mm oranje, vierkant) 19V, tot 5A
(110W max) gereguleerd
AC Omzetter (apart verkocht) 110VAC tot 0,7 A,
(75W max), gewijzigde sinewave
Intern
Batterij type Lithium-ion (NMC)
Batterijvermogen 58Wh (11V, 5200mAh)
Levensduur honderden cyclussen
Zekeringen 15A, standaard autozekering
Algemeen
Koppelbaar ja, met andere Sherpa V2
Gewicht 1,2 lbs (544 gr)
Afmetingen 4,5 x 1,5 x 5,25 in (11,4 x 3,8 x 13,3 cm)
Garantie 12 maanden
Getest en Gecertificeerd
Operationele gebruikstemp. 32-104F (0-40C)
1

OPLADEN

Van AC, 12V of zonnepanelen.

2 3

STROOM

Verbinden met laptop, AC* 12V of USB apparaat

AANVULLEN

Om goed voorbereid te zijn, laat apparaten aangesloten op AC, 12V of zonnepaneel.
Veelgestelde Vragen
V: Hoe weet ik of hij aan staat?
A:
Druk op de witte stroomschakelaar onder de
LCD batterijmonitor en het lampje gaat branden
V: Hoe weet ik of hij volledig opgeladen is?
A: Het LCD licht van de batterijmonitor geeft het
oplaadniveau aan met toenames van 20%.
Als alle delen ingevuld zijn en het bovenste
gedeelte FULL aanduidt, dan is hij
opgeladen en klaar voor gebruik.
V: Is hij waterdicht?
A: Nee. Hoewel de Sherpa 100 onverslijtbaar is,
wordt aanbevolen hem tegen de elementen te
beschermen. Zorg dat de poorten droog zijn
alvorens het apparaat te gebruiken.
V: Mag de oplader mee in het vliegtuig?
A: Ja, de Sherpa 100 voldoet aan alle eisen voor
hardbagage en is ideaal om uw apparaten
opgeladen te houden tijdens lange vluchten.
Raadpleeg de luchtvaartmaatschappij voor
actuele richtlijnen.
T
V:
Hoe lang kan de Sherpa 50 opgeladen blijven?
A: Hij kan enkele maanden opgeladen blijven.
Om de batterij gezond en klaar voor gebruik
te houden, raden we echter aan om de Sherpa
50 voor en na gebruik aangesloten te houden.
Indien dat niet mogelijk is, dan elke 3-4
maanden opladen.
V: Wat is het voor soort batterijtechniek?
A: Lithium-ion NMC. Dit heeft de volgende
voordelen: slaat meer energie op; kleiner
en lichter watt voor watt; hij blijft langer
opgeladen, zelfs na maanden opslag.
V: Kan ik verschillende Sherpa’s aan elkaar
koppelen?
A: Ja. U kunt twee Sherpa’s samenkoppelen
via de sidecar poort. Neem contact op met
goalzero.com voor het koppelsnoer.
V: Waarom ging hij automatisch uit?
A: De Sherpa heeft in een ingebouwde functie
die het apparaat na een inactieve periode
uitzet. Dit spaart stroom uit. Om deze
modus uit te schakelen en hem altijd in de
Altijd aan modus te houden, houdt u de
stroomschakelaar ongeveer 10 seconden
lang ingedrukt. Als u in de Altijd aan modus
bent, verschijnt er links boven in de LCD
batterijmonitor een klein AAN icoontje. Dit
zal alleen uitgaan als de stroom opraakt of
als u hem uitzet.
Aantekening voor Externe Gebruikers:
Langdurige Opslag: Bij langdurige opslag
(maximaal een jaar) de Sherpa 50 tot 50%
opladen, verwijder vervolgens de zekering
en bewaar op een koele plek.
*AC omzetter apart verkocht
AUTOSTOPCONTACT
She rpa 50
®
FRANÇAIS
ESPAÑOL
NEDERLANDS
Manuel d’utilisation
Contactez-nous :
Numéro gratuit : 888-794-6250
675 W. 14600 S.
Bluffdale, UT 84065
www.GOALZERO.com

Connaitre son matériel

110V Inverseur CA (vendu séparément) 110V, up to 0.7A (75W max)
onde sinusoïdale modifiée
220V Inverseur CA (vendu séparément) 220V, up to 0.35A (75W max)
onde sinusoïdale modifiée
Interne
Type de batterie Lithium-ion (NMC)
Capacité de la batterie 58wH (11V, 5200mAH)
Durée de vie des centaines de cycles
Fusibles 10A, fusible de voiture standard
Informations générales
Chainage oui, avec d’autres Sherpa V2
Poids 1.1lbs
(544g)
Dimensions 4.5 x 1.5 x 5 in (11.4 x 3.8 x 13.3 cm)
Garantie 12 mois
Testé et certifié
Température en fonctionnement 32-104F (0-40°)
CHARGEUR PORTABLE
Caractéristiques techniques
Utilisation :
Pour garder la batterie saine et fonctionnelle nous vous
recommandons de laisser votre SHERPA 50 branché entre les
utilisations.
Chargement avec : Temps de charge approximatif
Prise murale CA 3 heures
Nomad 13 GOAL ZERO 8-16 heures
Entrée
Port pour chargemen t (8. 0mm, bleu, rond) 14-2 5V (30W m ax)
Sorties
Port USB 5V, 0-1.5A (.57W max), régulé
Port 12V (6.0 mm, ver t, hexa gonal) 12V, 0-6 A (100 W max), régulé
Port Sidecar (9mm, side) 9-13V, 0-10A (75W max),
Non régulé, à utiliser avec un inverseur Sherpa ou pour le chainage
Port PC (7.4mm, orange, carré) 19V, 0-5A (100W max), régulé
Voyant
USB
ENTREE chargement
Interrupteur Marche/Arrêt
Sorties 12 Volt
Interrupteur 12 Volt/PC
Sorties PC
1

CHARGER

Grace au courant alternatif, 12V ou aux panneaux solaires.

2 3

ALIMENTER

Brancher à n’importe quelle prise de courant*, Port PC,
12V, ou périphérique USB.

RECHARGER

Pour être toujours opérationnel gardez
les dispositifs branchés dans une prise AC, 12V ou à un panneau solaire.
Questions fréquentes
Q : Comment savoir si il est allumé ?
R : Pour lallumer, appuyez sur linterrupteur
blanc situé sous l’écran LCD de la batterie.
Q : Comment savoir si le chargement est
complet ?
R : L’écran LCD de la batterie affiche le niveau
de charge par tranches de 20%. Si toutes
les zones sont remplies et que le moniteur
dit “FULL”, alors c’est chargé et prêt à être
utilisé.
Q : Est-il résistant à l’eau ?
R : Non. Bien que le SHERPA soit résistant,
l'électricité et l'eau ne font pas bon ménage.
Assurez-vous que les ports soient secs
avant l'utilisation du dispositif.
Q : Puis-je emporter le chargeur dans un avion ?
R : Oui, le SHERPA est parfait pour garder vos
appareils chargés lors de longs vols.
Q : Combien de temps le Sherpa 50 peut
conserver son niveau de charge ?
R : Il peut conserver sa charge pendant
plusieurs mois. Cependant, pour garder la
batterie saine et fonctionnelle nous vous
recommandons de laisser votre SHERPA
50 branché entre les utilisations. Si ce n’est
pas possible, chargez-le tous les 3-4 mois.
Q : Quel est le type de batterie est utilisée ?
R : Lithium-ion NMC. Elle possède les
avantages suivants : Permet de stocker
plus d’énergie ; en terme de watt, elle est
petite et plus légère ; elle conserve le
niveau de charge même après des mois de
stockage.
Q : Est-il possible de faire du chainage ?
R : Oui. Vous pouvez relier plusieurs Sherpas
ensembles grâce au port sidecar.
Contactez goalzero.com pour le câble de
chainage.
Q : Pourquoi s’éteint-il automatiquement ?
R : Le SHERPA possède une fonction intégrée
qui éteint l’unité automatiquement après
une période d’inactivité. Cela permet
d’économiser l’énergie. Pour ignorer ce
mode et conserver le mode “toujours en
marche”, maintenez l’interrupteur de mise
en marche enfoncé environ 10 secondes.
Un petit icone “ON” va apparaitre sur la
partie supérieure gauche de l’écran LCD de
la batterie. Dans ce cas, il s’éteindra lorsque
qu’il n’aura plus d’énergie ou lorsque vous
l’éteindrez.
Note pour les utilisateurs extrêmes :
Stockage long terme : Pour un stockage de
long terme (jusqu’à un an), chargez le
Sherpa 50 à 50% puis enlevez le fusible et
conservez dans un endroit frais.
*inverseur AC vendu séparémentGuía de usuario
Contacto:
Número gratuito: 888-794-6250
675 W. 14600 S.
Bluffdale, UT 84065
www.GOALZERO.com

Familiarícese con su equipo

110 V Inversor AC (se vende por separado) 110V, up to 0.7A (75W max)
onda sinusoidal modificada
220 V Inversor AC (se vende por separado) 220V, up to 0.35A (75W max)
onda sinusoidal modificada
Estructura interna
Tipo de batería Ión de Litio (NMC)
Capacidad de batería 58wH (11V, 5200mAH)
Vida útil cientos de ciclos
Fusibles 10A, fusible de coche estándar
General
Combinable Sí, con otros Sherpa V2
Peso 1,1lbs (544g)
Dimensiones 4,5 x 1,5 x 5 in (11,4 x 3,8 x 13,3 cm)
Garantía 12 meses
Probado y certificado
Te m p e r a t u r a ó p t i m a d e f u n c i o n a m i e n t o 3 2 - 1 0 4 F ( 0 - 4 0 C )
RECARGADOR PORTÁTIL
Especificaciones técnicas
Uso:
Para mantener la batería en buen estado y lista para usar,
recomendamos que deje su SHERPA 50 enchufado cuando
no lo esté usando.
Cargar con: Tiempos de carga aproximados:
Cargador de pared AC 3 horas
GOAL ZERO Nomad 13.5 8-16 horas
Entradas
Puerto de carga (8,0mm, azul, círculo) 14-25V (30W máx)
Salidas
Puerto USB 5V, 0-1,5A (7.5W máx), regulado
Puerto 12V 12V, 0-6A (75W máx),
(6,0mm, verde, hexágono) regulado
Puerto lateral (9mm, lateral) 9-13V, 0-10A (100W máx),
no regulado, usar con inversor Sherpa o
para combinar con más unidades
Puerto de ordenador portátil
(7,4mm, naranja, cuadrado) 19V, 0-5A (100W máx) regulado
Luz
USB
ENTRADA de carga
Interruptor On/Off
Salidas de 12 voltios
Interruptor para 12V/ordenador portátil
Salidas
de ordenador portátil
1

CARGAR

En una toma AC, 12V o paneles solares.

2 3

USAR
Enchufar en cualquier toma de corriente Puerto de ordenador portátil, AC*, 12V o aparato USB.

RECARGAR

Para estar preparado, mantener los aparatos enchufados en una toma AC, 12V o panel solar.
Preguntas frecuentes
P: ¿Cómo sé si está encendido?
R: Pulse el botón blanco de encendido debajo
del monitor LCD de la batería y se iluminará.
P: ¿Cómo sé si está cargado completamente?
R: El monitor de batería led muestra el nivel de
carga en incrementos del 20%. Si todas las
áreas están oscuras y el monitor dice
“FULL”, significa que el aparato está
cargado y listo para usar.
P: ¿Es resistente al agua?
R: No. Aunque el SHERPA es resistente, la
electricidad y el agua no son una buena
combinación. Asegúrese de que los puertos
están secos antes de usar el aparato.
P: ¿Puedo llevar el recargador conmigo en el
avión?
R: Sí, el SHERPA es perfecto para mantener
sus aparatos cargados durante vuelos
largos.
P: ¿Cuánto tiempo puede el Sherpa 50
mantener su carga?
R: Puede mantener su carga durante varios
meses. No obstante, para mantener la
batería en buen estado y lista para usar,
recomendamos que deje su SHERPA 50
enchufado cuando no lo esté usando. Si esto
no es posible, cárguelo cada 3-4 meses.
P: ¿Qué tipo de tecnología de batería tiene?
R: Ión de litio NMC. Tiene las siguientes
ventajas: acumula más energía, es más
pequeña y ligera, y retiene su carga incluso
tras meses de almacenamiento.
P: ¿Puedo combinar varios SHERPAS juntos?
R: Sí. Puede conectar múltiples Sherpas juntos
a través del puerto lateral. Póngase en
contacto con goalzero.com para conseguir
el cable de conexión.
P: ¿Por qué se apaga automáticamente?
R: El SHERPA tiene una herramienta
incorporada que hace que la unidad se
apague tras un periodo de inactividad. Con
esto se ahorra energía. Para evitar este
modo y mantener el aparato siempre
encendido, simplemente mantenga pulsado
el botón de encendido durante unos 10
segundos. Aparecerá un pequeño icono “ON”
en la esquina superior izquierda del monitor
LCD de la batería al cambiar al modo
“siempre encendido”. En este caso, solo se
apagará al agotarse la batería o cuando
usted lo apague.
Nota para usuarios extremos:
Almacenamiento a largo plazo: Para
almacenar durante mucho tiempo (hasta un
año), cargar el Sherpa 50 al 50%, a
continuación quitar el fusible y guardar en
un lugar fresco.
*El Inversor AC se vende por separado
She rpa 50
®
She rpa 50
®

View the manual for the Goal Zero Sherpa 50 here, for free. This manual comes under the category power banks and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Goal Zero Sherpa 50 or do you need help? Ask your question here

Need help?

Do you have a question about the Goal Zero and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Goal Zero Sherpa 50 power bank is a portable device that provides a convenient and reliable source of power on the go. With a battery capacity of 5200 mAh, it offers sufficient power to charge various electronic devices such as smartphones, tablets, and cameras. Weighing 544 grams, it is lightweight and easy to carry. The power bank is compatible with a wide range of chargers, making it suitable for use with most electronic devices. It operates at a battery voltage of 11 volts and utilizes Lithium Nickel Manganese Cobalt Oxide (LiNMC) battery technology, ensuring efficient and fast charging. LED indicators allow users to easily monitor the battery level and charging status. Featuring a single USB Type-A output port, the power bank enables users to connect and charge their devices conveniently. Its dimensions of 114 mm in width, 133 mm in depth, and 38 mm in height make it compact and space-saving. In terms of sustainability, the Sherpa 50 power bank holds RoHS certification, which ensures it meets certain environmental standards. It is also certified with CE and FCC, further guaranteeing its compliance with safety and regulatory requirements. In summary, the Goal Zero Sherpa 50 power bank offers portability, compatibility, and reliability for charging electronic devices. With its compact size, efficient battery technology, and LED indicators, it provides a convenient power solution for users on the move. Its certifications also reflect its commitment to sustainability and safety.

General
BrandGoal Zero
ModelSherpa 50 | GZ-62206
Productpower bank
EAN0847974002575
LanguageEnglish
FiletypeUser manual (PDF)
Design
Product colorBlack, Silver
Charger compatibilityUniversal
LED indicatorsYes
CertificationCE, FCC
Number of simultaneously connected devices (max)2
Waterproof-
Built-in flashlightYes
Built-in displayYes
Housing material-
Performance
Battery capacity58 Wh
Battery capacity5200 mAh
Battery voltage11 V
Battery technologyLithium Nickel Manganese Cobalt Oxide (LiNMC)
Charging sourceAC, Solar
Number of charging cycles-
Fast charging-
Battery charge time (solar)16 h
Battery charge time (AC)3 h
Weight & dimensions
Weight544 g
Width114 mm
Depth133 mm
Height38 mm
Ports & interfaces
USB Type-A output ports1
Operational conditions
Operating temperature (T-T)0 - 40 °C
Sustainability
Sustainability certificatesRoHS
Lighting
Lamp typeLED
Light colorWhite
Packaging content
ManualYes
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Goal Zero Sherpa 50 below.

What is the weight of the Goal Zero Sherpa 50?

The Goal Zero Sherpa 50 has a weight of 544 g.

What certifications does the Goal Zero Sherpa 50 have?

The Goal Zero Sherpa 50 has the following certifications: CE, FCC.

What is the height of the Goal Zero Sherpa 50?

The Goal Zero Sherpa 50 has a height of 38 mm.

What is the width of the Goal Zero Sherpa 50?

The Goal Zero Sherpa 50 has a width of 114 mm.

What is the depth of the Goal Zero Sherpa 50?

The Goal Zero Sherpa 50 has a depth of 133 mm.

How do I charge the Goal Zero Sherpa 50 power bank?

To charge the Sherpa 50, connect the included AC wall charger to an electrical outlet and plug the other end into the input port of the power bank. The charging LED indicator will light up to show that it is charging.

How long does it take to fully charge the Sherpa 50?

The charging time of the Sherpa 50 will depend on the power source. When using the included AC charger, it typically takes around 3-4 hours to fully charge the power bank.

Can I charge devices while the Sherpa 50 is being charged?

Yes, you can charge your devices while the Sherpa 50 is being charged. Simply connect your devices to the output ports of the power bank, and they will start charging simultaneously.

How do I check the remaining battery level on the Sherpa 50?

To check the remaining battery level, press the power button on the Sherpa 50. The LED battery indicator lights will illuminate to indicate the approximate charge level of the power bank.

Can the Sherpa 50 be used to power appliances that require AC power?

Yes, the Sherpa 50 has an AC inverter built-in. You can use the AC port on the power bank to power small appliances with a maximum power rating of 50W. Note that the Sherpa 50 is not designed to power high-energy devices such as hairdryers or microwaves.

What is the battery capacity of the Goal Zero Sherpa 50?

The battery capacity of the Goal Zero Sherpa 50 is 5200 mAh. This means it can store a decent amount of power, allowing users to charge their devices multiple times before needing a recharge.

Is the Goal Zero Sherpa 50 compatible with any type of charger?

Yes, the Goal Zero Sherpa 50 is compatible with universal chargers. This makes it convenient for users as they can easily charge the power bank with any available charger.

What is the battery voltage of the Goal Zero Sherpa 50?

The battery voltage of the Goal Zero Sherpa 50 is 11 V. This voltage level is considered to be high and provides a stable power output, ensuring efficient charging of connected devices.

What battery technology does the Goal Zero Sherpa 50 use?

The Goal Zero Sherpa 50 utilizes Lithium Nickel Manganese Cobalt Oxide (LiNMC) battery technology. LiNMC batteries are known for their high energy density, longer lifespan, and improved thermal stability, making them a reliable choice for power banks.

Does the Goal Zero Sherpa 50 have LED indicators?

Yes, the Goal Zero Sherpa 50 features LED indicators. These indicators provide users with visual feedback on the power bank's battery level, allowing them to monitor the remaining charge easily. This helps users plan their charging needs effectively.

Is the manual of the Goal Zero Sherpa 50 available in English?

Yes, the manual of the Goal Zero Sherpa 50 is available in English .

Is your question not listed? Ask your question here

No results