View the manual for the Glancetron DISP8034U here, for free. This manual comes under the category pole displays and has been rated by 1 people with an average of a 7.7. This manual is available in the following languages: English. Do you have a question about the Glancetron DISP8034U or do you need help? Ask your question here

| Brand | Glancetron |
| Model | DISP8034U | JD-8034004-0U |
| Product | pole display |
| EAN | 5712505716182 |
| Language | English |
| Filetype | User manual (PDF) |
| Product color | White |
| Housing material | Plastic |
| Display number of lines | 2 lines |
| Display digits | 20 digits |
| Digit size | 9.2 mm |
| Digit size (W x H) | 5 x 7 dot |
| Display brightness | 700 cd/m² |
| Illumination color | Blue |
| Interface | USB 2.0 |
| Width | 200 mm |
| Depth | 42 mm |
| Height | 87 mm |
| Weight | 900 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Glancetron DISP8034U below.
The Glancetron DISP8034U has a weight of 900 g.
The Glancetron DISP8034U has a height of 87 mm.
The Glancetron DISP8034U has a width of 200 mm.
The Glancetron DISP8034U has a depth of 42 mm.
To connect the pole display to your computer, you need to use the provided USB cable. Connect one end of the cable to the USB port on your computer and the other end to the USB port on the back of the display. Ensure that both ends are firmly plugged in.
Firstly, make sure that the power cable is securely connected to both the power outlet and the display. Then, check if the power switch on the back of the display is in the "on" position. If the display still does not turn on, verify that the power outlet is functioning properly by plugging in another device.
To adjust the brightness of the display, press the "Menu" button located on the front panel. Use the arrow keys to navigate to the "Brightness" option, then press the "Enter" button. Now, you can increase or decrease the brightness level using the arrow keys. Once you have selected the desired brightness, press "Enter" again to confirm.
Ensure that the communication settings between your computer and the pole display are correctly configured. Double-check that the baud rate, data bits, stop bits, and parity settings on both devices match. Additionally, verify that the software you are using to send data to the display is sending the correct format of characters.
To change the default language on the display, press and hold the "Menu" button for approximately 5 seconds. Then, use the arrow keys to navigate to the "Language" option and press "Enter" to select it. Scroll through the available languages using the arrow keys and select the desired language by pressing "Enter" again.
Yes, the manual of the Glancetron DISP8034U is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Glancetron and is the answer not in the manual?
Question and answer
Number of questions: 0