Press and hold the a key to activate or deactivate the handset. If you place a deactivated handset in the base station
or charging cradle, it will automatically activate after approx. 30 seconds.
Your phone is now
ready for use.
If you have any questions about using your phone
, please read the tips on troubleshooting ("Questions and answers",
¢page18) or contact our Customer Care team ¢page20.
Menu guidance
Your telephone's functions are accessed via a menu consisting of several levels (menu overview ¢page21).
Main menu (first menu level)
¤
When the handset is in idle status, press the display key §Menu§or right on the control key v to open the main menu.
The functions in the main menu are shown by means of an icon and th
e function's name.
Selecting a function:
¤You can scroll between functions using the control key q. The function is shown in the display.
¤Press the display key §OK§or the right control key vto select the displayed function. This opens the corresponding
submenu and the first entry is displayed.
If you press the display key
” or briefly the end call key a, the display returns to idle status.
Submenus
The functions in the submenu are indicated by name.
Selecting a function:
¤You can scroll between functions using the control key q. The function is shown in the display.
¤Press the display key §OK§ to select the displayed function. This opens the corresponding submenu and the first entry
is displayed.
If you press the display key
” or briefly the end call key a, the display returns to the previous menu level or you cancel
the operation.
Any settings you have not confirmed by pressing the display key
§OK§ are lost.
Reverting to idle status
From any point in the menu:
¤Press and hold the end call key aor
¤Do not press any key: after 2 minutes, the display will automatically revert to idle status.
Making calls
Making external calls and ending calls
External calls are calls using the public telephone network.
~
(Enter the phone number) ¤c.
The phone number is dialled. (Or you can firs
t press and hold talk key c [dial tone] and then enter the number.) During
the call you can adjust the earpiece volume using
t and set the volume withq.
End the call/cancel dialling: P
ress the end call key a.
You can automatically insert a network provider dialling code before any phone number (
¢ page 7).
Accepting a call
The handset indicates an incoming call by ringing and by a display on the screen.
Press the talk key
c to accept the call.
When Au
to Answer is activated (see menu overview ¢page22), simply remove the handset from the base station/
charging cradle.
Calling Line Identification
When you get a call, the caller's number will be displayed on your handset; the caller's name will be displayed if it is
stored in the directory.
Prerequisites:
1You have asked your network provider for the caller's number (CLIP) to be displayed on your handset screen.
2The caller has asked the network provider for his number to be identified (CLI).
External Call appears in the display if you have not requested CLIP, Wi
thheld appears if the caller has withheld CLI, and
Unavailable appears if CLI has not been requested.
Manual
View the manual for the Gigaset A475A Quattro here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 9.6. This manual is available in the following languages: English. Do you have a question about the Gigaset A475A Quattro or do you need help? Ask your question here
Need help?
Do you have a question about the Gigaset and is the answer not in the manual?
Question and answer
Number of questions: 0