Calling the answering machine and playing messages
~(Dial your own number.)¤When you hear your announcement, press 9 and enter the system PIN.
The following keys are used for operation:
Activating the answering machine
~(Enter your own number and allow the phone to ring until you hear the message, "Please enter your PIN code.")
¤~
Enter system PIN
Your answering machine is activated. It tells you how much memor
y time is left. The messages are now played back. The
answering machine cannot be deactivated remotely.
Network mailbox
The network mailbox is the answering machine in your provider's telephone network. More information is available from
your provider. You cannot use the network mailbox unless you have requested it from your provider.
In order to use the network mailbox quickly and easily via the network mailbox list (
¢page9), the menu (¢page21)
and to use fast access (
¢page1), you will need to enter the number in your phone:
§Menu§¤q Answer Machine ¤§OK§¤q Net Mailbox ¤~ (enter number)¤§OK§
Locating a handset (paging)
You can locate your handset using the base station.
¤Briefly press the registration/paging key on the base station (¢ page 1).
All handsets will ring at the same time (paging
), even if the ringers are switched off.
Ending paging:Br
iefly press the registration/paging key on the base station (¢page1) or press the talk key c or the
end call key
a on the handset.
Registering handsets manually
You can register up to four handsets on your base station. Each additional handset must be registered on the base sta-
tion in order for it to work properly!
Registration takes approx. 1 minute. Once the re
gistration process has been completed successfully, the display briefly
shows HS registered and returns to idle status. Handsets
are assigned the lowest available internal number (1-4). If the
internal numbers 1–4 are already assigned to other devices, the number4 will be overwritten.
A
During the number/date/time announcement: Skip to the start of the previous message.
During the message playback: Sk
ip to the start of the current message.
B
Stop playback. Press again to resume.
3
Go to the next message.
0
Delete current message.
1) On the handset
§Menu§¤qSettings ¤§OK§¤qHandset ¤§OK§¤qRegister HS ¤Enter the base station system PIN (default set-
ting: 0000)
¤§OK§¤ Registering is displayed.
2) On the base station
Within 60 seconds, press and ho
ld the registration/paging key on the base station (¢page1) for approx. 3 seconds.
(A475A only: There is a tone played if th
e registration mode is activated.)
Manual
View the manual for the Gigaset A475A Quattro here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 9.6. This manual is available in the following languages: English. Do you have a question about the Gigaset A475A Quattro or do you need help? Ask your question here
Need help?
Do you have a question about the Gigaset and is the answer not in the manual?
Question and answer
Number of questions: 0