Gemino 30 manual

7.5 · 1
PDF manual
 · 60 pages
English
manualGemino 30
MB4100 H
BEDIENUNGSANLEITUNG
BRUGSANVISNING
USER MANUAL
MANUAL DE USUARIO
KÄYTTÖOHJE
NOTICE D’UTILISATION
MANUALE D’USO
GEBRUIKERSHANDLEIDING
BRUKERMANUAL
MANUAL DO USUÁRIO
BRUKSANVISNING
INSTRUKCJA OBSUGI

Gemino 30

Gemino 30 M

Gemino 30 S

Gemino 30 Comfort

Gemino 30 M Comfort

ROLLATOR

ANDARILHO

ROLLAATTORI

RULLATOR

BALKONIK 4-KOOY

View the manual for the Gemino 30 here, for free. This manual comes under the category rollators and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Gemino 30 or do you need help? Ask your question here

Need help?

Do you have a question about the Gemino and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
J
JaniceJanuary 27, 2024

how to fold

General
BrandGemino
Model30
Productrollator
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Gemino 30 below.

How should I adjust the pushing handles to the correct height?

To adjust the pushing handles of the Gemino 30 rollator to the correct height, follow these steps: 1. Decide on the correct height for the push handles. 2. Loosen the screw using a 3 mm Allen key. 3. Lift out the pushing handle. 4. Turn the memory block through 90° and pull it out. 5. Position the block at the correct height to limit the pushing handle's height adjustment. 6. Close the height adjustment catch securely after positioning the pushing handle correctly. 7. Retighten the screw to secure the adjustment. Ensure that the pushing handles are set at a height that allows the user to walk upright without bending their back while pushing the rollator.

What is the recommended height for the pushing handles to avoid incorrect loadings?

To adjust the pushing handles of the Gemino 30 rollator to avoid incorrect loadings, follow these steps: 1. Lift the catch to unlock the pushing handle. 2. Push or pull the pushing handle to the correct height where the user can walk upright without bending the back while pushing. 3. Release the catch to automatically lock the pushing handle at the correct height. 4. If needed, activate the memory function by loosening the screw with a 3 mm Allen key, lifting out the pushing handle, turning the memory block, and setting it to the correct height. 5. Ensure the pushing handle cannot be positioned higher than the set point to prevent incorrect loadings. 6. Tighten the height adjustment catch and retighten the screw for secure positioning.

Is the manual of the Gemino 30 available in English?

Yes, the manual of the Gemino 30 is available in English .

Is your question not listed? Ask your question here

No results