View the manual for the Gemino 20 here, for free. This manual comes under the category rollators and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Gemino 20 or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Gemino 20 below.
To adjust the height of the pushing handles on the Gemino 20 rollator, follow these steps: 1. Locate the height adjustment catch on the pushing handle. It is a small lever or button that allows you to adjust the height. 2. Lift the catch to unlock the pushing handle. 3. Push or pull the pushing handle to the desired height. Make sure to adjust it so that you can walk upright into the rollator without needing to bend your back while pushing. 4. Release the catch to lock the pushing handle at the correct height. You should hear a click or feel it securely lock into place. 5. If you need to quickly set the pushing handle back to the correct height, you can use the memory function. To activate the memory function, follow these additional steps: a. Loosen the screw on the pushing handle using a 3 mm Allen key. b. Lift out the pushing handle. c. Turn the memory block through 90°. d. Position the memory block at the correct height. e. Tighten the screw to secure the pushing handle and memory block in place. By following these steps, you can easily adjust the height of the pushing handles on your Gemino 20 rollator for a comfortable and ergonomic walking experience.
If the brakes on the Gemino 20 rollator are not working properly, you can follow these steps to address the issue: 1. Check the distance between the brake block and the brake. It should be about 2 mm. If the distance is too large or too small, it can affect the braking performance. 2. Loosen the locking nut and adjust the brake by screwing the cable adjuster nut inwards or outwards. This will help you fine-tune the brake tension. 3. Test the brakes by spinning the wheel and squeezing the brake levers. Ensure that the wheels stop smoothly and that all wheels brake equally. 4. If the parking brake is applied, make sure the brake block does not press into the rubber of the wheel. This can cause damage to the wheel. By following these steps, you can troubleshoot and adjust the brakes on your Gemino 20 rollator to ensure they are working properly. Regularly inspecting and maintaining the brakes will help ensure your safety while using the rollator.
To fold and unfold the Gemino 20 rollator, follow these steps: 1. Folding the rollator: a. Pull the strap to fold up the rollator. b. The rollator will lock automatically in the completely folded position, and you will hear a faint click. 2. Unfolding the rollator: a. Pull the operating handles apart. b. Press the side bars down until you hear a small click in the fully unfolded position. c. Before using the rollator, make sure that the folding mechanism is locked in place. It is important to be aware of the danger of trapping injuries when folding and unfolding the rollator. Always exercise caution and avoid putting your fingers between the rollator's moving parts. By following these steps, you can easily fold and unfold the Gemino 20 rollator for convenient storage and transportation.
If the wheels of the Gemino 20 rollator are not moving smoothly, you can try the following steps to address the issue: 1. Check the condition of the wheels and ensure they have not been damaged. Look for any signs of wear or debris that may be affecting the movement. 2. Clean the rollator and make sure all moving parts are functioning correctly. Remove any dirt or debris that may be causing friction or hindering the smooth movement of the wheels. 3. Inspect and adjust all screwed connections. Ensure that they are tightened properly to prevent any wobbling or misalignment that could affect the wheel movement. 4. If the issue persists and the wheels still do not move smoothly, it is recommended to seek repairs from qualified personnel at the supplier in your municipality or at a technical aids center. They will have the expertise to diagnose and fix any underlying issues with the wheels. By following these steps, you can troubleshoot and address the issue of the wheels not moving smoothly on your Gemino 20 rollator, ensuring a smoother and more comfortable walking experience.
To clean the brake blocks and springs on the Gemino 20 rollator, you can follow these steps: 1. Regularly inspect the brake blocks and springs to check for any dirt or debris that may have accumulated. 2. Use a soft cloth or sponge dampened with warm soapy water to gently clean the brake blocks and springs. Avoid using abrasive cleaners or solvents that may damage the components. 3. Pay special attention to the brake blocks, ensuring that they are free from any residue or buildup that could affect their braking performance. 4. If necessary, you can use a brush with soft bristles to remove stubborn dirt or debris from the brake blocks and springs. Be gentle to avoid damaging the components. 5. After cleaning, rinse the brake blocks and springs with clean water to remove any soap residue. 6. Allow the brake blocks and springs to air dry completely before reassembling them onto the rollator. By following these steps, you can effectively clean the brake blocks and springs on your Gemino 20 rollator, ensuring optimal braking performance and prolonging the lifespan of these components.
Yes, the manual of the Gemino 20 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Gemino and is the answer not in the manual?
Question and answer
Number of questions: 1Where can I get a set of wheels for gemino 20m