GE Profile Opal XPIO13BCBT manual

GE Profile Opal XPIO13BCBT
7.5 · 1
PDF manual
 · 20 pages
English
manualGE Profile Opal XPIO13BCBT
49-1000499 Rev. 2 05-20 GEA

OPAL Ice Maker Quickstart Guide

IMPORTANT: Read and understand all safety instructions detailed in Owner's Manual before

using the Opal.

Cleaning the Ice Bin and Water Reservoir

Remove the ice bin and wash with warm soapy water, then rinse thoroughly. Use a damp sponge to
wipe down the water reservoir under the ice bin. Never use soap inside your Opal icemaker.

Rinsing Opal's Internal Components

1. Create a solution of five cups of water and one
teaspoon household bleach and pour solution
into water reservoir, up to the fill line shown in
Figure 1.
2. Plug in Opal and then hold the 'Clean' button
for 3 seconds to initiate the cleaning process.
See Figure 2.
3. Water will begin circulating and the 'Cleaning'
indicator will light up on the left-hand side of
the unit to confirm the unit is now in cleaning
process. See Figure 3. After a few minutes the
water will stop and the 'Cleaning' indicator light
will turn off.
4. When the 'Cleaning' indicator light turns off,
drain the Opal. Unhook the top of the drain
hoses at the back of the unit. See Figure 4.
Figure 3
Figure 2
Making Ice
Defrosting Cleaning
Hold 3 Sec
Add Water
Clean
Light Power
Making Ice
Defrosting Cleaning
Hold 3 Sec
Add Water
Clean
Light Power
Figure 1
Water
Reservoir
Fill Line
Figure 4
Pull to the left to unhook

View the manual for the GE Profile Opal XPIO13BCBT here, for free. This manual comes under the category ice-cream makers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the GE Profile Opal XPIO13BCBT or do you need help? Ask your question here

Need help?

Do you have a question about the GE and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The GE Profile Opal XPIO13BCBT is an ice-cream maker that offers a convenient and efficient way to make homemade ice cream. Designed with a sleek and modern aesthetic, this appliance seamlessly fits into any kitchen decor. Featuring a compact size, the Opal XPIO13BCBT easily accommodates on countertop spaces, making it accessible for everyday use. It utilizes advanced technology to churn the ice cream mixture into a creamy and smooth consistency, ensuring a delicious end result. The Opal XPIO13BCBT is equipped with a powerful and quiet motor, allowing for a hassle-free ice cream making process. With its user-friendly interface and intuitive controls, this ice cream maker is suitable for both beginners and experienced users. This GE ice cream maker uses a unique self-adjusting system, which automatically senses the hardness of the ice cream and adjusts the churn time accordingly. This ensures that the ice cream is perfectly churned and ready to be enjoyed. Additionally, the Opal XPIO13BCBT comes with a large capacity ice cream bucket, allowing for the creation of generous portions of ice cream. The removable parts are easy to clean and maintain, ensuring a hassle-free cleanup process. Overall, the GE Profile Opal XPIO13BCBT is a reliable and efficient ice cream maker that offers convenience and ease of use. Its sleek design, advanced technology, and self-adjusting system make it a valuable addition to any kitchen.

General
BrandGE
ModelProfile Opal XPIO13BCBT
Productice-cream maker
LanguageEnglish
FiletypeUser manual (PDF), Use and Care Manual (PDF), Installation Guide (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the GE Profile Opal XPIO13BCBT below.

How do I ensure the safety of using the GE Profile Opal XPIO13BCBT ice-cream maker?

To ensure the safety of using the GE Profile Opal XPIO13BCBT ice-cream maker, follow these steps: 1. Read and understand all the safety information provided in the user manual. 2. Make sure the ice-cream maker is placed on a stable and level surface to prevent it from tipping over during operation. 3. Check that the power cord is in good condition and properly grounded before plugging it into a power outlet. 4. Avoid touching the refrigerant tubing to prevent damage and potential leaks. Handle the appliance with care during installation and operation. 5. Keep the ice-cream maker away from flammable materials and sources of heat to reduce the risk of fire or explosion. 6. Do not immerse the appliance in water or any other liquid. It is an electrical device and should be kept dry at all times. 7. Only use the ice-cream maker for its intended purpose and follow the instructions provided in the manual for making ice cream. 8. Do not attempt to disassemble or repair the appliance yourself. Contact authorized service personnel for any maintenance or repairs. By following these safety guidelines, you can ensure a safe and enjoyable experience while using the GE Profile Opal XPIO13BCBT ice-cream maker.

Which parts are included with the GE Profile Opal XPIO13BCBT ice-cream maker?

The GE Profile Opal XPIO13BCBT ice-cream maker includes the following parts: 1. Opal 2.0 Ice Maker unit 2. Side Tank Accessory (only included with model number XPIO13BCBT and XPIO13SCSS) 3. Drain tube 4. Black hanger for the drain tube 5. Cap and plug for the drain tube 6. Water filter (optional accessory) 7. User manual (provides detailed instructions and safety information) Please note that the Side Tank Accessory is only included with model numbers XPIO13BCBT and XPIO13SCSS.

How do I get started with the GE Profile Opal XPIO13BCBT ice-cream maker?

To get started with the GE Profile Opal XPIO13BCBT ice-cream maker, follow these steps: 1. Ensure that the ice maker is placed on a flat and level surface. 2. Plug in the ice-cream maker to a power outlet. 3. Allow the ice maker to sit upright for at least five minutes before using it for the first time. 4. If included, attach the Side Tank Accessory to the ice maker. 5. Fill the water tank with clean, potable water up to the fill line indicated. 6. Press and hold the Power button for three seconds to turn on the ice maker. 7. Select the desired ice size by pressing the corresponding button on the control panel. 8. The ice maker will start the ice-making process automatically. It may take some time for the first batch of ice to be produced. 9. Once the ice is ready, it will be dispensed into the ice bin. 10. Use the ice scoop provided to remove the ice from the bin and enjoy your homemade ice cream. By following these steps, you can easily get started with the GE Profile Opal XPIO13BCBT ice-cream maker and start making delicious ice cream at home.

How do I clean and maintain the GE Profile Opal XPIO13BCBT ice-cream maker?

To clean and maintain the GE Profile Opal XPIO13BCBT ice-cream maker, follow these steps: 1. Regularly clean the ice bin and tray by removing them from the ice maker and wiping them with a soft cloth dampened with soapy water. Do not use solvents or chemicals. 2. Wipe the drip tray dry to prevent deposits from forming. Remove the tray and clean it with a soft cloth dampened with soapy water. 3. Clean the sensors with vinegar and wipe them clean with water. After draining the vinegar, run three cleaning cycles with fresh water to ensure thorough cleaning. 4. To remove mineral deposits, you can purchase an Opal Cleaning Kit and follow the instructions provided. 5. Keep the exterior of the ice-cream maker clean by wiping it with a soft, damp cloth. 6. Avoid immersing the ice-cream maker in water or any other liquid. 7. Regularly check the power cord for any damage and ensure it is properly grounded. 8. If you encounter any issues or require further maintenance, refer to the user manual or contact authorized service personnel. By following these steps, you can effectively clean and maintain your GE Profile Opal XPIO13BCBT ice-cream maker for optimal performance and longevity.

How do I adjust the display settings on the GE Profile Opal XPIO13BCBT ice-cream maker?

To adjust the display settings on the GE Profile Opal XPIO13BCBT ice-cream maker, follow these steps: 1. Press the Power button to turn on the ice-cream maker. 2. Locate the Display Settings button on the control panel. 3. Press the Display Settings button to access the display options. 4. Use the arrow buttons or the selector knob to navigate through the available display settings. 5. Select the desired display setting, such as brightness or language, by pressing the corresponding button or turning the selector knob. 6. Follow the on-screen prompts or indicators to make adjustments to the selected display setting. 7. Once you have made the desired adjustments, press the Display Settings button again to exit the display settings menu. 8. The ice-cream maker will now display the updated settings according to your preferences. By following these steps, you can easily adjust the display settings on the GE Profile Opal XPIO13BCBT ice-cream maker to customize your user experience.

How do I ensure the safety of using the GE Profile Opal XPIO13BCBT ice-cream maker?

To ensure the safety of using the GE Profile Opal XPIO13BCBT ice-cream maker, follow these steps: 1. Read and understand all the safety information provided in the user manual before using the appliance. 2. Make sure to handle, install, and operate the ice-cream maker with care to avoid any damage to the refrigerant tubing. 3. Keep the ice-cream maker away from flammable materials and sources of heat or open flames. 4. Ensure that the ice-cream maker is properly grounded according to the National Electric Code and local codes and ordinances. 5. Do not use the ice-cream maker if the power cord is damaged or the plug is loose. 6. Avoid touching hot surfaces of the ice-cream maker during operation. 7. Do not immerse the ice-cream maker or any of its components in water or any other liquid. 8. Keep the ice-cream maker out of reach of children to prevent any accidents or injuries. 9. Follow the recommended cleaning and maintenance instructions provided in the user manual to keep the ice-cream maker in good working condition. 10. If you have any concerns or questions regarding the safety of using the ice-cream maker, contact the manufacturer for assistance. By following these safety guidelines, you can enjoy using the GE Profile Opal XPIO13BCBT ice-cream maker with peace of mind.

Which parts are included with the GE Profile Opal XPIO13BCBT ice-cream maker?

The GE Profile Opal XPIO13BCBT ice-cream maker includes the following parts: 1. Opal 2.0 Ice Maker unit 2. Side Tank Accessory (only included with model number XPIO13BCBT and XPIO13SCSS) 3. Drain tube 4. Black hanger for the drain tube 5. Cap and plug for the drain tube 6. Water filter (if applicable) Please note that the Side Tank Accessory is only included with specific models. Ensure that all the parts are included in the package when you receive the ice-cream maker. If any parts are missing or damaged, contact the manufacturer for assistance. It's important to have all the necessary parts to ensure proper functioning and optimal performance of the GE Profile Opal XPIO13BCBT ice-cream maker.

How do I get started with the GE Profile Opal XPIO13BCBT ice-cream maker?

To get started with the GE Profile Opal XPIO13BCBT ice-cream maker, follow these steps: 1. Ensure that the ice-cream maker is placed on a flat and level surface. 2. Plug in the ice-cream maker to a power source. 3. Allow the ice-cream maker to sit upright for at least five minutes before using it for the first time. 4. If applicable, make sure the water filter is properly installed. 5. Open the lid of the ice-cream maker. 6. Fill the water reservoir with clean, potable water up to the fill line indicated. 7. Close the lid of the ice-cream maker. 8. Press and hold the Power button for three seconds to turn on the ice-cream maker. 9. Select the desired ice-cream texture by pressing the Texture button. 10. The ice-cream maker will start the ice-making process automatically. 11. Monitor the ice-cream maker as it produces ice, and wait for the ice to reach the desired consistency. 12. Once the ice is ready, scoop it out and enjoy your homemade ice cream. By following these steps, you can easily get started with the GE Profile Opal XPIO13BCBT ice-cream maker and start making delicious ice cream at home.

How do I clean and maintain the GE Profile Opal XPIO13BCBT ice-cream maker?

To clean and maintain the GE Profile Opal XPIO13BCBT ice-cream maker, follow these steps: 1. Regularly clean the ice bin by removing it from the ice maker and wiping it with a soft cloth dampened with soapy water. Avoid using solvents or chemicals. 2. Wipe the drip tray dry to prevent deposits. Remove the tray and clean it with a soft cloth and mild soapy water. 3. Clean the sensors with vinegar and wipe them clean with water. Ensure the vinegar is drained properly before running the ice maker. 4. If mineral deposits are present, consider using an Opal Cleaning Kit following the instructions provided. 5. Keep the exterior of the ice-cream maker clean by wiping it with a soft, damp cloth. 6. Avoid immersing any part of the ice-cream maker in water or other liquids. 7. Regularly check and replace the water filter if applicable, following the manufacturer's recommendations. 8. Store the ice-cream maker in a clean and dry place when not in use. 9. Refer to the user manual for any additional cleaning and maintenance instructions specific to the GE Profile Opal XPIO13BCBT ice-cream maker. By following these steps, you can ensure the cleanliness and proper maintenance of your GE Profile Opal XPIO13BCBT ice-cream maker for optimal performance.

How do I adjust the display settings on the GE Profile Opal XPIO13BCBT ice-cream maker?

To adjust the display settings on the GE Profile Opal XPIO13BCBT ice-cream maker, follow these steps: 1. Press the Power button to turn on the ice-cream maker. 2. Locate the Display button on the control panel. 3. Press the Display button to cycle through the available display settings. 4. Continue pressing the Display button until you reach your desired display setting. 5. The available display settings may include options such as brightness levels or different display modes. 6. Once you have selected your desired display setting, the ice-cream maker will automatically adjust the display accordingly. 7. If you want to change the display setting again, simply repeat the process by pressing the Display button. By following these steps, you can easily adjust the display settings on the GE Profile Opal XPIO13BCBT ice-cream maker to suit your preferences.

Is the manual of the GE Profile Opal XPIO13BCBT available in English?

Yes, the manual of the GE Profile Opal XPIO13BCBT is available in English .

Is your question not listed? Ask your question here

No results