GE Profile Opal OPAL01PSS manual

GE Profile Opal OPAL01PSS
7.5 · 1
PDF manual
 · 52 pages
English
manualGE Profile Opal OPAL01PSS

2 49-1000418 Rev. 8

THANK YOU FOR MAKING GE APPLIANCES A PART OF YOUR HOME.

Whether you grew up with GE Appliances, or this is your first, we’re happy to have you in the family.

We take pride in the craftsmanship, innovation and design that goes into every GE Appliances

product, and we think you will too. Among other things, registration of your appliance ensures that we

can deliver important product information and warranty details when you need them.

The Good Ice™

View the manual for the GE Profile Opal OPAL01PSS here, for free. This manual comes under the category ice-cream makers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the GE Profile Opal OPAL01PSS or do you need help? Ask your question here

Need help?

Do you have a question about the GE and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
C
Craig hamDecember 23, 2023

How do I remove the top to clean the sensors

General
BrandGE
ModelProfile Opal OPAL01PSS
Productice-cream maker
LanguageEnglish
FiletypeUse and Care Manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the GE Profile Opal OPAL01PSS below.

How do I ensure the GE Profile Opal OPAL01PSS ice-cream maker is being used safely?

To ensure the safe usage of the GE Profile Opal OPAL01PSS ice-cream maker, follow these steps: 1. Read and understand all the safety information provided in the manual before using the appliance. 2. Make sure the ice-cream maker is placed on a stable and level surface to prevent it from tipping over during operation. 3. Ensure that the power cord is properly grounded and not damaged. Do not use the appliance if the cord is frayed or the plug is loose. 4. Keep the ice-cream maker away from flammable materials and sources of heat to reduce the risk of fire or explosion. 5. Do not touch the refrigerant tubing or any hot surfaces while the appliance is in use to avoid burns. 6. Only use the ice-cream maker for its intended purpose and follow the recommended operating instructions. 7. Do not immerse the appliance in water or any other liquid. Clean it using a damp cloth and mild detergent. 8. Keep the appliance out of reach of children and ensure that they are supervised when using it. 9. If you encounter any issues or have concerns about the safe operation of the ice-cream maker, refer to the troubleshooting section in the manual or contact the manufacturer for assistance. By following these safety guidelines, you can enjoy using the GE Profile Opal OPAL01PSS ice-cream maker with peace of mind.

What are the parts included with the GE Profile Opal OPAL01PSS ice-cream maker?

The parts included with the GE Profile Opal OPAL01PSS ice-cream maker are: 1. Opal Ice Maker unit 2. Side Tank Accessory (included with model numbers OPAL01GEPKT and OPAL01GENKT) 3. Drain tube 4. Black hanger for the drain tube 5. Cap and plug for the drain tube 6. User manual (including safety information, parts list, and operating instructions) Please note that the Side Tank Accessory is only included with specific model numbers.

How do I get started with the GE Profile Opal OPAL01PSS ice-cream maker?

To get started with the GE Profile Opal OPAL01PSS ice-cream maker, follow these steps: 1. Ensure that the ice maker is placed on a flat and level surface. 2. Plug in the ice maker to a power source. 3. Allow the ice maker to sit upright for at least 24 hours before using it for the first time. This allows the refrigerant to settle. 4. Open the lid of the ice maker and remove any packaging materials or protective films. 5. Fill the water reservoir with clean, potable water up to the fill line indicated. 6. Close the lid of the ice maker. 7. Press the power button to turn on the ice maker. 8. Select the desired ice cube size using the control panel. 9. The ice maker will start the ice-making process automatically. It may take some time for the first batch of ice to be produced. 10. Once the ice is ready, you can scoop it out from the ice bin or use the included ice scoop. Note: It is recommended to clean the ice maker before the first use. Refer to the cleaning instructions in the manual for detailed steps on how to clean the appliance.

How do I clean and maintain the GE Profile Opal OPAL01PSS ice-cream maker?

To clean and maintain the GE Profile Opal OPAL01PSS ice-cream maker, follow these steps: 1. Cleaning the Ice Bin and Tray: - Remove the ice bin from the ice maker. - Clean the ice bin with a soft cloth dampened with soapy water. Do not use solvents or chemicals. - Wipe the drip tray dry to prevent deposits. Clean the drip tray with a soft cloth dampened with soapy water. Do not use solvents or chemicals. 2. System Cleaning/Sanitizing Procedure: - Fill the water reservoir with a mixture of water and vinegar. - Press the display button to start the cleaning process. The light will spin, indicating water circulation. - After three minutes, the water will stop and the light will pulse. - Drain the Opal when the light pulses. - Lay down the drain tube to drain into a sink or bucket. - Repeat the cleaning process with fresh water, adding five cups of water to the reservoir each time. 3. Cleaning the Sensors: - Clean the sensors with vinegar and wipe them clean with water. - After draining the vinegar, run three rinse cycles with fresh water. Regularly cleaning and maintaining your GE Profile Opal OPAL01PSS ice-cream maker will ensure optimal performance and longevity.

How do I adjust the display settings on the GE Profile Opal OPAL01PSS ice-cream maker?

To adjust the display settings on the GE Profile Opal OPAL01PSS ice-cream maker, follow these steps: 1. Locate the display button on the ice-cream maker. It is usually located on the control panel or the front of the appliance. 2. Press the display button once to turn the ice-cream maker on or off. 3. To adjust the interior lighting, touch and hold the display button for 3 seconds. This will dim the lighting if desired. 4. Some models may have a mode switch located on the back of the ice-cream maker. This switch allows you to switch between different display modes, such as ice-making mode or cleaning mode. 5. Refer to the user manual for specific instructions on how to navigate and adjust the display settings, as the process may vary depending on the model. By following these steps, you can easily adjust the display settings on your GE Profile Opal OPAL01PSS ice-cream maker to suit your preferences.

How do I ensure the safety of using the GE Profile Opal OPAL01PSS ice-cream maker?

To ensure the safety of using the GE Profile Opal OPAL01PSS ice-cream maker, follow these steps: 1. Before moving or installing the ice-cream maker, it is recommended to have two people to prevent injury. 2. Make sure to place the ice-cream maker on a flat and level surface that can support its weight when full of water. 3. Do not use the ice-cream maker outdoors. 4. Ensure proper air circulation around the side and back walls of the ice-cream maker. 5. Avoid using the ice-cream maker near ovens or cooktops. 6. Do not use the ice-cream maker in a humid or wet environment. 7. Make sure the ice-cream maker is properly grounded according to the installation instructions. 8. Do not touch the lamp inside the ice-cream maker, as it emits light that can cause eye damage and burn unprotected skin. 9. Do not insert any objects into the ice-cream maker's openings or remove any covers. 10. If any part of the ice-cream maker is damaged, do not use it and contact the manufacturer for assistance. By following these safety precautions, you can ensure a safe and enjoyable experience while using the GE Profile Opal OPAL01PSS ice-cream maker.

What are the parts included with the GE Profile Opal OPAL01PSS ice-cream maker?

The GE Profile Opal OPAL01PSS ice-cream maker comes with the following parts: 1. Main Unit: This is the main body of the ice-cream maker that houses the ice-making components. 2. Ice Bin: The ice bin is where the ice cubes are collected and stored. 3. Water Reservoir: The water reservoir holds the water that is used to make ice. 4. Side Tank Accessory (included with certain models): This accessory provides additional water storage capacity for making more ice. 5. Drain Tube: The drain tube is used to drain excess water from the ice-cream maker. 6. Power Cord: The power cord is used to connect the ice-cream maker to a power source. Please note that the availability of certain parts may vary depending on the specific model of the GE Profile Opal ice-cream maker.

How do I get started with the GE Profile Opal OPAL01PSS ice-cream maker?

To get started with the GE Profile Opal OPAL01PSS ice-cream maker, follow these steps: 1. Ensure that the ice maker is placed on a flat and level surface that can support its weight when full of water. 2. Plug in the ice maker to a power source. 3. If included, attach the side tank accessory to provide additional water storage capacity. 4. Fill the water reservoir with clean, potable water up to the fill line indicated. 5. Press the power button to turn on the ice maker. 6. The ice maker will start the ice-making process automatically. It may take some time for the first batch of ice to be produced. 7. Once the ice is ready, it will be collected in the ice bin. You can scoop out the ice as needed. 8. If you want to adjust the ice-making settings, refer to the manual for instructions on how to customize the ice production. 9. When you're finished using the ice maker, you can unplug it and empty any remaining water from the reservoir and ice bin. By following these steps, you can easily get started with the GE Profile Opal OPAL01PSS ice-cream maker and enjoy homemade ice whenever you want.

How do I clean and maintain the GE Profile Opal OPAL01PSS ice-cream maker?

To clean and maintain the GE Profile Opal OPAL01PSS ice-cream maker, follow these steps: 1. Cleaning the Ice Bin and Tray: - Remove the ice bin from the ice maker. - Clean the ice bin with a soft cloth dampened with soapy water. Avoid using solvents or chemicals. - Wipe the drip tray dry to prevent deposits. Clean the tray with a soft cloth dampened with soapy water. 2. System Cleaning/Sanitizing Procedure: - Fill the water reservoir with a mixture of vinegar and water. - Start the cleaning process by pressing the display button. The light will spin, and water will circulate. - After three minutes, the water will stop, and the light will pulse. - Drain the Opal when the light pulses. - Lay down the ice bin and drip tray to drain into a sink or bucket. - Rinse the ice bin and drip tray with fresh water. - Repeat the rinse cycle, adding fresh water to the reservoir each time. - Drain the Opal and add five cups of fresh water to the reservoir. - Repeat the rinse cycle as desired. 3. Cleaning the Sensors: - Clean the sensors with vinegar and wipe them clean with water. - After draining the vinegar, run three rinse cycles with fresh water. By following these steps, you can effectively clean and maintain your GE Profile Opal OPAL01PSS ice-cream maker for optimal performance.

How do I adjust the display settings on the GE Profile Opal OPAL01PSS ice-cream maker?

To adjust the display settings on the GE Profile Opal OPAL01PSS ice-cream maker, follow these steps: 1. Locate the display button on the ice-cream maker. It is usually labeled and easily accessible. 2. Press the display button once to turn the ice-cream maker on or off. 3. To adjust the interior lighting, touch and hold the display button for 3 seconds. This will dim the interior lighting if desired. 4. The display ring on the ice-cream maker provides visual feedback on its current status and operations. 5. The light ring may indicate different modes or actions, such as making ice, cleaning mode, defrosting, or needing more water. 6. Pay attention to the different colors and patterns displayed on the light ring to understand the current status of the ice-cream maker. 7. If you need further assistance or want to explore more display settings, refer to the manual for detailed instructions. By following these steps, you can easily adjust the display settings on the GE Profile Opal OPAL01PSS ice-cream maker and have better control over its operations.

How do I ensure the safety of using the GE Profile Opal OPAL01PSS ice-cream maker?

To ensure the safety of using the GE Profile Opal OPAL01PSS ice-cream maker, follow these steps: 1. Before moving or installing the ice-cream maker, it is recommended to have two people to prevent injury. 2. Make sure to place the ice-cream maker on a flat and level surface that can support its weight when full of water. 3. Do not use the ice-cream maker outdoors. 4. Ensure proper air circulation around the side and back walls of the ice-cream maker. 5. Avoid using the ice-cream maker near ovens or cooktops. 6. Do not use the ice-cream maker in a humid or wet environment. 7. Connect the ice-cream maker to a properly grounded electrical outlet. 8. Check the power cord for any damage before use. 9. Do not touch hot surfaces of the ice-cream maker during or after use. 10. Keep the ice-cream maker away from flammable materials. 11. Do not immerse the ice-cream maker in water or any other liquid. 12. Follow all safety instructions and warnings provided in the user manual. By following these safety guidelines, you can ensure a safe and enjoyable experience while using the GE Profile Opal OPAL01PSS ice-cream maker.

What are the parts included in the GE Profile Opal OPAL01PSS ice-cream maker?

The parts included in the GE Profile Opal OPAL01PSS ice-cream maker are: 1. Opal Ice Maker unit 2. Side Tank Accessory (included with specific model numbers) 3. Drain tube 4. Black hanger for the drain tube 5. Cap and plug for the drain tube 6. Water filter (included) 7. User manual (included) The Opal Ice Maker unit is the main component of the ice-cream maker. The Side Tank Accessory is included with certain model numbers and provides additional water storage capacity. The drain tube, black hanger, and cap are used for draining water from the ice-cream maker. The water filter is included to ensure the quality of the ice produced. Lastly, the user manual is provided to guide you through the setup, operation, and maintenance of the ice-cream maker. Please note that the availability of specific parts may vary depending on the model number of the GE Profile Opal OPAL01PSS ice-cream maker.

How do I get started with using the GE Profile Opal OPAL01PSS ice-cream maker?

To get started with using the GE Profile Opal OPAL01PSS ice-cream maker, follow these steps: 1. Ensure that the ice maker is placed on a flat and level surface that can support its weight when full of water. 2. Connect the ice maker to a properly grounded electrical outlet. 3. Fill the water reservoir with clean, potable water up to the fill line indicated. 4. Press the power button to turn on the ice maker. 5. Select the desired ice cube size using the control panel. 6. The ice maker will start the ice-making process automatically. It may take some time for the first batch of ice to be produced. 7. Once the ice is ready, it will be automatically dispensed into the ice bin. 8. Use the ice scoop provided to remove the ice from the bin. 9. If the ice maker is not in use, it is recommended to turn it off and unplug it from the electrical outlet. By following these steps, you can easily get started with using the GE Profile Opal OPAL01PSS ice-cream maker and enjoy freshly made ice whenever you need it.

How do I clean and maintain the GE Profile Opal OPAL01PSS ice-cream maker?

To clean and maintain the GE Profile Opal OPAL01PSS ice-cream maker, follow these steps: 1. Cleaning the Ice Bin and Tray: - Remove the ice bin from the ice maker. - Clean the ice bin with a soft cloth dampened with soapy water. Avoid using solvents or chemicals. - Wipe the drip tray dry to prevent deposits. Remove the tray and clean it with a soft cloth dampened with soapy water. Again, avoid using solvents or chemicals. 2. System Cleaning/Sanitizing Procedure: - Fill the water reservoir with a mixture of vinegar and water. - Start the cleaning process by pressing the display button. The light will spin, indicating water circulation. - After three minutes, the water will stop, and the light will pulse. - Drain the Opal when the light pulses. - Repeat the cleaning process by adding fresh water to the reservoir and running the cleaning cycle multiple times. - To remove mineral deposits, you can purchase an Opal Cleaning Kit and follow the instructions provided. 3. Cleaning the Sensors: - Clean the sensors with vinegar and wipe them clean with water. - After draining the vinegar, run three rinse cycles with fresh water. By following these steps, you can effectively clean and maintain your GE Profile Opal OPAL01PSS ice-cream maker, ensuring its optimal performance and longevity.

How do I adjust the display settings of the GE Profile Opal OPAL01PSS ice-cream maker?

To adjust the display settings of the GE Profile Opal OPAL01PSS ice-cream maker, follow these steps: 1. Press the power button to turn on the ice-cream maker. 2. Touch and hold the power button for 3 seconds to dim the interior lighting if desired. 3. Locate the mode switch on the back of the ice-cream maker. 4. Set the mode switch to the desired display setting: - For a steady display ring light, set the mode switch to the "Ice Making" position. - For a pulsing display ring light, set the mode switch to the "Cleaning" position. - For a flashing display ring light, set the mode switch to the "Defrosting" position. - For a solid display ring light, set the mode switch to the "Full" position. 5. Adjust the display settings as needed based on your preferences or the current status of the ice-cream maker. By following these steps, you can easily adjust the display settings of the GE Profile Opal OPAL01PSS ice-cream maker to suit your preferences or to indicate the current status of the machine.

Is the manual of the GE Profile Opal OPAL01PSS available in English?

Yes, the manual of the GE Profile Opal OPAL01PSS is available in English .

Is your question not listed? Ask your question here

No results