GE GTW460ASJ5WW manual

GE GTW460ASJ5WW
8.5 · 10
PDF manual
 · 56 pages
English
manualGE GTW460ASJ5WW

WASHERS

SAFETY INSTRUCTIONS ..........3

USING THE WASHER

Getting Started ...................... 5
Loading .............................15
Appliance Communication .............16

CARE AND CLEANING ............17

INSTALLATION

INSTRUCTIONS

.....................18

TROUBLESHOOTING TIPS ......23

LIMITED WARRANTY ............27

CONSUMER SUPPORT .......... 28

GTW500
GTW490
GTW485
GTW465
GTW460
GTW335
GTW330
GTW220
HTW240
HTW200

OWNER’S MANUAL &

INSTALLATION

INSTRUCTIONS

Write the model and serial
numbers here:
Model # _________________
Serial # _________________
You can find them under the
lid of the washer.
49-90576-3 01-19 GEA

ENGLISH/ESPAÑOL

G018
GE is a trademark of the General Electric Company. Manufactured under trademark license.

View the manual for the GE GTW460ASJ5WW here, for free. This manual comes under the category washing machines and has been rated by 10 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the GE GTW460ASJ5WW or do you need help? Ask your question here

Need help?

Do you have a question about the GE and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 18
J
Jim RamseyMarch 10, 2021

1. Tub drained but will not spin. (Coupler?) 2. No lights on control panel. 3. Machine will not respond to stop/pause button. Continues to try to spin. 4. Wife loaded machine this morning before work. I heard it begin the drain cycle 8 hours later. It appears the clothes soaked all day. Don’t understand the long delay.

1. Tub drained but will not spin. (Coupler?)
2. No lights on control panel. 
3. Machine will not respond to stop/pause butt...
zoom-in
View photo
3 comments
E
Emma of manua.lsJanuary 18, 2024

Based on the information provided, here are some possible causes and solutions for the issues with the GE GTW460ASJ5WW washing machine: 1. If the tub is draining but not spinning, it could be due to the lid being opened and closed during the cycle. This is normal and part of the start-up sequence. 2. If there are no lights on the control panel, check if the washer is plugged in and the water supply is turned on. Make sure the cord is securely plugged into a working outlet and both hot and cold faucets are fully open. 3. If the machine is not responding to the stop/pause button and continues to try to spin, it may be because the lid is open. Close the lid and press the Start button. 4. Regarding the long delay between loading the machine and it starting the drain cycle, it could be the result of a cancelled previous cycle or water being left in the unit with the lid closed for 24 hours. Try closing the lid, selecting a new cycle, and starting the machine. Please keep in mind that these solutions are general and may not be specific to your model. It's always best to refer to the manual for your washing machine for accurate troubleshooting steps.

This answer is automatically generated
W
wayne follettApril 20, 2022

Do I need a new controlcard?

W
Warren October 1, 2023

Hate to tell you but it cycled all day, when it had an unlevel load it refills agitated and try’s again. This washer sucks

Y
Yahaira ortega August 30, 2022

How to program the washing machine after having changed the pulley, it has unprogrammed itself, it starts to wash and stops after about 5 seconds.

How to program the washing machine after having changed the pulley, it has unprogrammed itself, it starts to wash and stops a...
zoom-in
View photo
This message has been automatically translated
L
LuciaJanuary 3, 2024

The washing machine's agitator came loose, what should I do? Do I need to change any parts or does it simply snap back into place?

The washing machine's agitator came loose, what should I do? Do I need to change any parts or does it simply snap back into p...
zoom-in
View photo
This message has been automatically translated
T
Timothy James RayFebruary 6, 2022

Is there a reset button for this washer?

2 comments
E
Emma of manua.lsOctober 26, 2023

Yes, there is a reset button for the GE GTW460ASJ5WW washer. To reset the washer, you can follow these steps: 1. Unplug the washer from the power outlet. 2. Wait for at least one minute. 3. Plug the washer back into the power outlet. 4. Press and hold the "Start/Pause" button for 5 seconds. 5. Release the button.

This answer is automatically generated
R
ReneeAugust 14, 2022

That’s what I said

C
Cheri Ann PerryJanuary 14, 2023

GE GTW460ASJ5WW Wash machine no longer fills to the proper water level. Never know which level. Is there a sensor for that?

J
John BozickApril 29, 2024

why do we still have a water drip into the tub after washer has finished washing?

K
Karen GalbraithOctober 13, 2023

Why does my washer only fill water to 1/3 tub when I select super or precise fill?

B
Betty Mosiman December 2, 2023

Washer stops after wash cycle. Will not completely spin and drain all water or continue to rinse cycle. I have to press button to start it to continue draining and go to rinse cycle.

The GE GTW460ASJ5WW is a top-loading washing machine with a 4.2 cubic foot capacity. It offers 14 different wash cycles to accommodate a wide range of fabrics and soil levels, including options for delicates, whites, and bulky items. This washing machine also features a deep fill option for larger loads and a dual-action agitator for thorough cleaning. In terms of technology, the GE GTW460ASJ5WW features a time saver option that reduces cycle length without sacrificing cleaning performance. It also has an auto soak option for tough stains and a deep rinse option for extra fabric care. Additionally, this washing machine has a special cycle for pet bedding and a customizable My Cycle option. The GE GTW460ASJ5WW has a traditional aesthetic with a white exterior and control panel. It measures 27 inches in width, 44 inches in height, and 27 inches in depth. This washing machine is Energy Star certified, meaning it meets strict guidelines for energy efficiency. Overall, the GE GTW460ASJ5WW provides a range of washing options and features while also being energy-efficient. Its traditional design and reliable performance make it a popular choice for many households.

General
BrandGE
ModelGTW460ASJ5WW
Productwashing machine
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the GE GTW460ASJ5WW below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

Why is the washer not filling up with water?

Check if the water supply valves are fully open, the water hose connections are secure, and the water pressure is sufficient for the machine to operate properly.

Why is the machine not starting?

Ensure that the power cord is plugged in securely, the electrical outlet is functioning, and there is no power outage in your area. Additionally, make sure the lid is closed properly and that the cycle settings are correctly selected.

Why is the washer not spinning?

Confirm that the lid is tightly closed, as the washer will not spin if the lid is open. Make sure the load is properly balanced to prevent the machine from detecting an imbalance and ceasing spinning. Also, check if the cycle selected requires spinning or if the load removal option is activated.

Why is the machine shaking excessively during a cycle?

Verify if the leveling legs are properly adjusted to ensure the machine is stable. Unevenly distributed loads or overloaded tubs can also cause excessive shaking. Consider redistributing the load evenly or reducing the load size if needed.

Why is the water temperature incorrect?

Make sure you have selected the desired water temperature setting correctly. It is possible that the hot and cold water supply hoses are connected improperly. Verify the water supply hoses are correctly connected to the corresponding inlet valves on the back of the machine to ensure the proper temperature.

Is the manual of the GE GTW460ASJ5WW available in English?

Yes, the manual of the GE GTW460ASJ5WW is available in English .

Is your question not listed? Ask your question here

No results