Garmin LIDAR-Lite v3 HP manual

Garmin LIDAR-Lite v3 HP
7.5 · 1
PDF manual
 · 10 pages
English
manualGarmin LIDAR-Lite v3 HP

LIDAR-LITE V3HP

OPERATION MANUAL AND

TECHNICAL SPECIFICATIONS

Laser Safety

WARNING
This device requires no regular maintenance. In the event that
the device becomes damaged or is inoperable, repair or service
must be handled by authorized, factory-trained technicians only.
Attempting to repair or service the unit on your own can result in
direct exposure to laser radiation and the risk of permanent eye
damage. For repair or service, contact your dealer or Garmin
®
for more information.
This device has a protective housing which, when in place,
prevents human access to laser radiation in excess of the
accessible emission limit (AEL) for Class 1 laser products. This
device should not be modified or operated without its housing or
optics. Operating this device without a housing and optics, or
operating this device with a modified housing or optics that
expose the laser source, may result in direct exposure to laser
radiation and the risk of permanent eye damage. Removal or
modification of the diffuser in front of the laser optic may result in
the risk of permanent eye damage.
CAUTION
This device emits laser radiation. Use of controls or adjustments
or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
This laser product is designated Class 1 during all procedures of
operation. When the ranging feature of the device is activated, a
laser emitter of a ranging module may emit laser radiation and
the device should not be aimed toward anyone. Avoid looking
toward the laser emitter or into the laser radiation (beam) when
operating the device. It is advisable to turn off the ranging
module when it is not in use. This device must be used only
according to the directions and procedures described in this
documentation.
Do not leave this device within the reach of children.
NOTICE
CLASS 1 LASER PRODUCT
Classified EN/IEC 60825-1 2014
This product is in conformity with performance standards for
laser products under 21 CFR 1040, except with respect to those
characteristics authorized by a variance number.

Specifications

Specification Measurement
Size (L × W × H) 40.18 × 54.99 × 35 mm (1.58 ×
2.16 × 1.38 in.)
Weight 38 g (1.34 oz.)
Operating temperature -20 to 60°C (-4 to 140°F)
Power 5 Vdc nominal
4.5 Vdc min., 5.5 Vdc max.
Current consumption 65 mA idle
85 mA during an acquisition
Range (70% reflective target) 40 m (131 ft.)
Specification Measurement
Resolution ±1 cm (0.4 in.)
Accuracy < 2 m ±5 cm (2 in.) typical
NOTE: Nonlinearity present below
1 m (39.4 in.)
Accuracy ≥ 2 m ±2.5 cm (1 in.) typical
Mean ±1% of distance max
Ripple ±1% of distance max
Update rate (70% reflective target) Greater than 1 kHz typical
Reduced sensitivity at high update
rates
User interface I2C
PWM
External trigger
I2C interface Fast-mode (400 kb/s)
Default 7-bit address 0x62
Internal register access and control
PWM interface External trigger input
PWM output proportional to
distance at 10 microsecond/cm
Water rating IEC 60529 IPX7*
Important:
The bare wire portion of the
wiring harness is not water
resistant, and can act as a path
for water to enter the device. All
bare-wire connections must
either be made in a water-tight
location or properly sealed.
Water may enter under the
transmitting lens. This could
affect performance, but will not
affect the IEC 60529 IPX7
water rating.
NOTE: *The device withstands incidental exposure to water of
up to 1 m for up to 30 min. For more information, go to
www.garmin.com/waterrating.

Device Dimensions

GUID-1EAC1F92-654C-4E02-9B6D-0FDC7A0DB1BF v2April 2020

Manual

View the manual for the Garmin LIDAR-Lite v3 HP here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Garmin LIDAR-Lite v3 HP or do you need help? Ask your question here

Need help?

Do you have a question about the Garmin and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Garmin LIDAR-Lite v3 HP specifications

Below you will find the product specifications and the manual specifications of the Garmin LIDAR-Lite v3 HP.

The Garmin LIDAR-Lite v3 HP is a laser sensor device designed for applications that require precise distance measurements. With dimensions of 40.18 × 54.99 × 35 mm (1.58 × 2.16 × 1.38 in) and a weight of 38 g (1.34 oz), it is compact and lightweight. This device operates with a power supply of 5 Vdc nominal, with a minimum of 4.5 Vdc and a maximum of 5.5 Vdc. The device has a current consumption of 65 mA idle and 85 mA during an acquisition. The Garmin LIDAR-Lite v3 HP has a range of 40 m (131 ft) with a resolution of ±1 cm (0.4 in) and an accuracy of ±5 cm (2 in) typical for distances less than 2 meters, and ±2.5 cm (1 in) typical for distances of 2 meters or more. The device has an update rate greater than 1 kHz and features an I2C user interface, PWM interface, and external trigger input. The device is water-resistant with an IPX7 rating, however, the bare wire portion of the wiring harness is not water-resistant and must be sealed properly to prevent water from entering the device.

General
BrandGarmin
ModelLIDAR-Lite v3 HP
Productnot categorized
LanguageEnglish
FiletypeUser manual (PDF), Safety instructions (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Garmin LIDAR-Lite v3 HP below.

Is the manual of the Garmin LIDAR-Lite v3 HP available in English?

Yes, the manual of the Garmin LIDAR-Lite v3 HP is available in English .

Is your question not listed? Ask your question here

No results