Garmin GMI 10 manual

Garmin GMI 10
6.3 · 1
PDF manual
 · 20 pages
English
manualGarmin GMI 10
14 GMI 10 Quick Start Manual

Changing NMEA 2000

Device Options

You can view information about

your NMEA 2000 devices and

change available device-specic

options on the GMI 10.

1. From the instrument screen,
select Menu > Setup > NMEA
2000 Devices.
2. You will see a list of all
connected NMEA 2000
devices. Select a device to see
information about the device,
such as the software version and
the serial number.

Advanced Sensor

Conguration

1. From the instrument screen,
select Menu > Setup > NMEA
2000 Devices.
2. Select the appropriate sensor.
Select Cong.
3. Enter the appropriate values for
the listed options.
TIP: For more information on
conguring the sensor, refer to
the installation instructions for
the sensor.

Honda Engine ECO

Symbol

The symbol appears when

boats with NMEA 2000-compatible

Honda engines are running in a

fuel-efcient mode and engine RPM

is displayed.

s

View the manual for the Garmin GMI 10 here, for free. This manual comes under the category Measurements and has been rated by 1 people with an average of a 6.3. This manual is available in the following languages: English. Do you have a question about the Garmin GMI 10 or do you need help? Ask your question here

Need help?

Do you have a question about the Garmin and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Garmin owners to provide you with a good answer.

Number of questions: 0

General
Garmin
GMI 10
Measurement
0753759076078
English
User manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Garmin GMI 10 below.

Is your question not listed? Ask your question here

No results