Garett Kids Cute 4G manual

Garett Kids Cute 4G
8.4 · 2
PDF manual
 · 2 pages
English
manualGarett Kids Cute 4G
If there is no animation, make sure the watch is properly connected.
When the battery is completely discharged, the animation may appear
after several minutes. Before switching on the watch for the first time, it
is recommended to charge it for about 2 hours.
The charging voltage should not exceed 5V.
The recommended maximum charging current is 1A.

Garett

Kids Cute 4G

User manual

Thank you for purchasing the Garett Kids Cute 4G
- 2 - - 3 -
3
2
Touchscreen
5
1
2
3
4
5
Function button (switching on/off/wake up/lock screen)
SOS button
Photo/video camera
Nano SIM card slot

PRODUCT DESCRIPTION CHARGING

1. The smartwatch is charged using the magnetic cable supplied with the
device.
2. Attach the end of the magnetic cable so that the contacts of the watch
touch the contacts of the charging cable. Then connect the other end of
the cable to the USB port of a computer or a USB power adapter. When it is
connected properly, the charging animation will appear on the watch
screen.
- 6 -
6
Magnetic charging port
1
4
7
Interchangeable strap
6
7

INSTALLING THE NANO SIM CARD

1. First remove the Nano SIM card port cover(5) on
the left side of the watch.
2. Then remove the plug and place the card on the
tray, arranging it according to the illustrative
diagram in the picture, i.e. with the card chip
towards the display and the rectangular side of
the card towards the slot.
3. Insert the tray into the watch, making sure it
fits properly.
- 4 - - 5 -
NORMAL
SIM
MICRO
SIM
NANO
SIM
V
Install the SIM card when the
device is turned off.
Turning on/off
To start the device, press and hold the function button(2) for
approx. 5 seconds. To switch off, repeat the action and confirm
switching off.
If the smartwatch does not start, try charging it.
After start-up
The smartwatch is operated using a touch screen as well as a
function button and SOS.

OPERATION

Changing the watch face
Press and hold the home screen to display the face change
menu. Select the dial by swiping right/left and then click
anywhere on the screen to confirm your selection.
Navigation
Swipe left/right on the home screen to access the main menu.
By touching the screen you will enter the selected function. After
entering the function, swiping right or pressing the function
button(2) allows you to return to the previous screen.
Swipe down on the home screen or menu to access the settings
bar. It allows you to preview and quickly change selected
functions of the smartwatch.
Swipe up on the home screen or menu to access the pedometer.
It allows you to view the number of steps taken (the function
should be enabled in the Garett Tracker application in the tab
Activity>Pedometer>Measurement).
- 7 - - 8 - - 9 - - 10 - - 11 -
- 12 - - 13 -
www.garett.eu
EN

SAFETY ISSUES

Before use, read this user manual carefully and keep it for further
reference. The manufacturer shall bear no liability for any damage/injuries
caused by improper use. Depending on the smartwatch batch, certain
functions may differ from the functions described in this user manual.
Using this device in the vicinity of medical devices may disrupt their
operation. Users should pay special attention when using the smartwatch
in the vicinity of medical devices such as pacemakers, hearing aids and
other electronic medical devices.
Do not dispose of the device in fire. There is a risk of battery explosion and
resulting threat to life and health.
Protect the device from heat sources and direct sunlight.
Do not store the device in damp places or high temperatures, because
it may cause electric shock or fire.
The device is not resistant to long-term immersion in water.
Do not swim or dive while wearing the device.
In case of failure/damage, please stop using the product and contact
the Garett service centre. Any attempts to make your own repairs may
damage the device and result in invalidation of the warranty.
The device should only be cleaned with a soft, slightly damp cloth. Do not
use strong detergents or any other stimulants to clean the product.
Do not swim while wearing the device. The IP67 standard does
not guarantee that the smartwatch will be waterproof while
swimming. The forces acting on the device during swimming
may cause it to become unsealed and damaged.

INSTALLATION

Put the watch on your wrist and adjust the strap length so as to ensure the
device strap is not too loose.

NANO SIM CARD REQUIREMENTS

1. The device requires the installation of a Nano SIM card.
2. The SIM card must meet the following requirements:
The card must be active (if it is a new card, you will need to activate it in a
mobile phone by making an outgoing call),
The card must be topped up (applies to prepaid cards),
The card cannot have an active PIN code (to check whether the card has
an active PIN lock, install it in a mobile phone and check whether a PIN
code is required when starting up the phone - if so, the PIN lock is active
and will need to be disabled in the phone settings or by contacting the
operator),
The card must support 2G/3G/4G modes, have an active internet
service and caller ID function;
SIM cards offered by operators as data-only, e.g. those designed
for tablets, may not function properly in the device.
Since the device uses an internet connection, we recommend purchasing
an internet package from the operator to avoid additional costs.
A 1 GB/month package is sufficient. The costs of internet connection,
voice calls and text messages are specified in the price list of your mobile
operator.
4G
HD

FIRST START-UP

1. When the Nano SIM card is properly installed in the watch and meets all
the requirements described above, start the device by pressing and holding
the function button(2) for approx. 5 seconds.
2. After starting the watch, the home screen will appear, displaying the time
and date. Swiping down on the home screen or menu will display: Wi-Fi
signal, GSM signal, internet connection, battery level and quick menu
(brightness, volume, settings).
3. Wait until the GSM signal (icon – ) and internet connection (icon – )
appear. They are necessary for the further configuration of the device. If the
above-mentioned icons do not appear after one minute, make sure that the
SIM card meets all the requirements described above and that the watch
is in a place where it can connect to the network. You should also turn off
(Settings>Turn off) and restart the watch. If the GSM signal appears but
internet connection continues to be unavailable (no icon – ), the problem
may be due to an incorrect APN configuration. You can configure the APN
via special configuration text messages, described later in the manual in the
TROUBLESHOOTING section.
4. When the internet connection is active, proceed to the next step, i.e.
installing the Garett Tracker app on your phone. The main menu of the
smartwatch is described later in the manual. The device will be fully
functional after registration and configuration of the watch via the Garett
Tracker app.
- Wi-Fi signal
- GSM signal
- internet connection
- battery level
Video tutorial – Garett Tracker
How do you use the Garett Tracker app?
If you want to learn more about configuring the device via the Garett
Tracker app, we recommend checking out this video – scan the QR code
or use the link.
https://youtu.be/1VJjvs1raaA

INSTALLING THE GARETT TRACKER APP

The smartwatch works with your smartphone using the Garett Tracker app.
Before use, you must first download the app from the Google Play Store or
the AppStore and install it on your phone. You can search for the app by
entering the name "Garett Tracker" in the store search engine or by scanning
the relevant QR code provided below.
iOS
Android
Remember to grant the app the required consents and
permissions before registration so that it works properly. If you
refuse, selected functions of the app may not work properly or
will be unavailable.

REGISTERING IN THE APP

1.Launch the Garett Tracker app.
2.After launching the app, a login screen
will be displayed, where you can log in to
your account (if already created), register
a new account or change the app
language.
3.To register a new account, click the
Registration option.
4.In the first field, enter your e-mail
address that will serve as your login to the
app.
5.Then retype the verification code from
the image generated on the right.
6.In the last field, enter your password
which, together with the e-mail address,
will be used to log in to the app. The
password may consist of 6-12 characters.
Polish characters and special characters
are not allowed.
7.After filling in all the details, click
Registration.
Please remember or note down the e-mail address and password
used to register the watch, because the account to which the
device was first assigned is the administrator account.
Re-registration will be possible only after obtaining permission
from the administrator or after contacting our Technical Support
Department: serwis@garett.pl
8.Then press the Add Device button to
add the watch to the previously created
account.
9.On the next screen, scan the QR code
using the button from the sticker on
the back of the watch (REG CODE) or in
the watch settings. The code can be also
entered manually.
10.Enter the device name, and it will be
displayed as the name of the device
associated with your account.
11.The next step is to choose your
relationship with the user of the
smartwatch.
12.Optionally, enter the phone number of
the device, which will facilitate
communication.
13.After filling in all the details, click OK,
and the device and Garett Tracker app
will be fully functional.
In the event of any problems with registration of the device,
please contact our Technical Support Department:
serwis@garett.pl

GARETT TRACKER APP

After completing the registration and
adding the device, the home screen of
the app will be displayed, showing the
map with the last watch location. The
bubble over the pin specifying the
location displays the source of location
data (GPS/LBS/WiFi), address, time of
the last location and watch battery level.
To ensure the most accurate
location, the smartwatch must be
in an open area, in order to have
an accurate and stable GPS signal.
When there is no GPS signal, e.g.
because it is inside a building, the
location is determined based on
the nearest mobile network
transmitter. In this case, the
indicated position of the device
may differ from its physical
location.
NOTE: When using any function of the
Garett Tracker app or trying to configure
the settings, the following message may
appear: "The device is offline". This
means that the smartwatch has no
active internet connection or is out of
Check whether your SIM card is properly installed and meets all the
requirements described earlier in the manual. If the SIM card is properly
installed and meets the criteria described, the lack of signal may be due
to an incorrect APN configuration. The way to get the proper APN
configuration is described later in the manual in the TROUBLESHOOTING
section.

View the manual for the Garett Kids Cute 4G here, for free. This manual comes under the category smartwatch and has been rated by 2 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Garett Kids Cute 4G or do you need help? Ask your question here

Need help?

Do you have a question about the Garett and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 3
E
eleneJune 24, 2023

Hello, before registering, the page with the barcode was torn and I can't scan it. What can I do?

Hello, before registering, the page with the barcode was torn and I can't scan it. What can I do?
zoom-in
View photo
This message has been automatically translated
G
Gulyás LászlóDecember 24, 2023

How can i use garett nice kids 4g without sim card only with bluetooth connection

A
Analise FenechJanuary 29, 2023

how to do Bluetooth on the gadget watch

The Garett Kids Cute 4G smartwatch is a mobile network-connected device designed specifically for children. Equipped with a digital display with a resolution of 240 x 240 pixels, this smartwatch offers a visual interface for various features and functions. However, it lacks Bluetooth and Wi-Fi connectivity, limiting its ability to sync with other devices or access the internet wirelessly. Unlike some other smartwatches, the Garett Kids Cute 4G does not include a heart rate monitor, blood pressure monitor, or thermometer. This means that it cannot track or monitor the wearer's vital signs. The smartwatch does, however, offer basic personal information management capabilities such as a calculator. With an International Protection (IP) code of IP67, the Garett Kids Cute 4G is dust tight and can withstand immersion in water up to a depth of one meter for a limited time. This could provide some level of protection against accidental splashes or brief submersions. In terms of memory, the smartwatch has 192 MB of RAM and 0.168 GB of flash memory. While this may be sufficient for basic use, it may limit the device's ability to run resource-heavy applications or store large amounts of data. The Garett Kids Cute 4G is powered by a 1000 mAh battery, which provides a maximum battery life of 72 hours. This should allow for multiple days of use before needing to be recharged. In conclusion, the Garett Kids Cute 4G smartwatch is a mobile network-connected device with limited features and capabilities. While it may be sufficient for basic use, its lack of Bluetooth, Wi-Fi, and health monitoring features may limit its appeal to some users.

General
BrandGarett
ModelKids Cute 4G | 5904238483824
Productsmartwatch
EAN5904238483824
LanguageEnglish
FiletypeUser manual (PDF)
Network
Mobile network connectionYes
Mobile network generation4G
2G standardsGSM
GSM bands supported900,1900,850,1800 MHz
SIM card typeNanoSIM
GPS (satellite)Yes
Ports & interfaces
BluetoothNo
Bluetooth version-
Wi-FiNo
USB portYes
Near Field Communication (NFC)-
Headphone connectivity-
Features
Heart rate monitorNo
Blood pressure monitorNo
ThermometerNo
Personal info management (PIM)Calculator
Find my phone functionYes
Call notificationsYes
PedometerYes
Quality of sleepYes
Short Message Service (SMS)Yes
SOS alert functionYes
SMS notificationsYes
Music playerYes
Alarm clockYes
StopwatchYes
Display
Display typeDigital
Display resolution240 x 240 pixels
TouchscreenYes
Display diagonal1.69 "
Display technologyIPS
BacklightYes
Design
International Protection (IP) codeIP67
Market positioningSmartwatch
Watch case size44 mm
Watch case colorBlue
Watch case material-
Band colorBlue
Band materialRubber
Band size-
ShapeRectangular
Suggested genderMale
Designed for childrenYes
Buckle colorGray
Closure typeSingle prong strap buckle
Removable strapYes
Performance
RAM capacity192 MB
Flash memory0.168 GB
Built-in microphoneYes
Built-in speaker(s)Yes
Built-in cameraYes
Mobile operating systems supported-
FM radio-
Power
Battery capacity1000 mAh
Battery life (max)72 h
Standby time96 h
Battery technologyLithium Polymer (LiPo)
Charging time2 h
Battery type-
Weight & dimensions
Width44 mm
Depth56 mm
Thickness16 mm
Band width20 mm
Weight52 g
Packaging content
Cables includedUSB
ManualYes
Warranty cardYes
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Garett Kids Cute 4G below.

What is the weight of the Garett Kids Cute 4G?

The Garett Kids Cute 4G has a weight of 52 g.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is the screen size of the Garett Kids Cute 4G?

The screen size of the Garett Kids Cute 4G is 1.69 ".

What is the screen resolution of the display of the Garett Kids Cute 4G?

The screen resolution of the Garett Kids Cute 4G is 240 x 240 pixels.

What is the width of the Garett Kids Cute 4G?

The Garett Kids Cute 4G has a width of 44 mm.

What is the depth of the Garett Kids Cute 4G?

The Garett Kids Cute 4G has a depth of 56 mm.

How do I connect my Garett Kids Cute 4G smartwatch to my smartphone?

To connect your Garett Kids Cute 4G smartwatch to your smartphone, go to the Bluetooth settings on your phone, enable Bluetooth, and then select the smartwatch from the list of available devices. Follow the on-screen instructions to complete the pairing process.

How can I set up the SOS feature on my smartwatch?

To set up the SOS feature on your Garett Kids Cute 4G smartwatch, navigate to the settings menu, find the SOS settings option, and enter the emergency contact number. Once set up, press and hold the designated SOS button on your smartwatch to trigger an emergency alert to the specified contact.

Can I track my child's location using the smartwatch?

Yes, you can track your child's location using the Garett Kids Cute 4G smartwatch. Install the companion mobile app on your smartphone, pair it with the smartwatch, and then access the location tracking feature within the app. It will provide you with real-time updates on your child's whereabouts.

How do I add contacts to my child's smartwatch?

To add contacts to the Garett Kids Cute 4G smartwatch, open the contacts menu on the watch, select the "add contact" option, and enter the necessary details such as the name and phone number. Save the contact, and it will be available for your child to call or message directly from the smartwatch.

How can I adjust the screen brightness on my smartwatch?

To adjust the screen brightness on your Garett Kids Cute 4G smartwatch, navigate to the settings menu and find the display settings option. From there, you can modify the brightness level according to your preference. Keep in mind that higher brightness settings may reduce battery life.

Does Garett Kids Cute 4G have a mobile network connection?

Yes, Garett Kids Cute 4G has a mobile network connection. This means that the smartwatch can be used independently without relying on a smartphone for connectivity.

Does Garett Kids Cute 4G have Bluetooth?

No, Garett Kids Cute 4G does not have Bluetooth. This means that it cannot be connected to other devices wirelessly using Bluetooth technology.

Does Garett Kids Cute 4G have Wi-Fi?

No, Garett Kids Cute 4G does not have Wi-Fi. This means that it cannot connect to the internet or other Wi-Fi enabled devices directly.

Does Garett Kids Cute 4G have a heart rate monitor?

No, Garett Kids Cute 4G does not have a heart rate monitor. This feature is not available in this smartwatch, which may be a limitation for users who require heart rate monitoring.

What is the battery life of Garett Kids Cute 4G?

The battery life of Garett Kids Cute 4G is up to 72 hours with maximum usage and up to 96 hours on standby. This offers a decent battery life compared to other smartwatches in the market, providing users with longer usage time between charges.

Is the manual of the Garett Kids Cute 4G available in English?

Yes, the manual of the Garett Kids Cute 4G is available in English .

Is your question not listed? Ask your question here

No results