View the manual for the Gardena 21000 inox here, for free. This manual comes under the category pumps and has been rated by 2 people with an average of a 9.6. This manual is available in the following languages: English. Do you have a question about the Gardena 21000 inox or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Gardena 21000 inox below.
To connect the pump to a water source, you need to ensure that the suction hose is securely connected to the water inlet of the pump. Make sure all connections are tight and properly sealed.
The Gardena 21000 inox pump has a maximum flow rate of 10,000 liters per hour, meaning it can move up to 10,000 liters of water in one hour of operation.
To adjust the pressure of the water output, you can use the pressure switch on the pump. Turn the switch clockwise to increase the pressure and counterclockwise to decrease it. Adjust it according to your specific needs.
Priming the pump is necessary to ensure proper operation. To prime the Gardena 21000 inox pump, fill the pump housing with water manually until it overflows from the outlet. This will remove any air and ensure the pump is ready for use.
Yes, the Gardena 21000 inox pump is equipped with a dry-run protection feature. This means that if the pump runs out of water or the water flow is insufficient, it will automatically shut off to prevent any damage.
Yes, the manual of the Gardena 21000 inox is available in English .
Is your question not listed? Ask your question here