Furuno FR-2115-B manual

Furuno FR-2115-B
8 · 2
PDF manual
 · 89 pages
English
manualFuruno FR-2115-B
3-4

3.7 Confirming Magnetron Heater Voltage

Magnetron heater voltage is adjusted at the factory. However, confirm that it is within the
prescribed rating.

Table 3-1 Magnetron heater voltage rating

Rating FR-2115-B (12 kW) FR-2125-B (25 kW)
ST-BY, 0.125 nm 7.4 to 7.6 V 8.2 to 8.4 V
TX, max range 7.4 to 7.6 V 6.5 to 7.5 V
1. Press [RADAR MENU] [0] [0] [0] [2] [0] to open the INITIAL SETTING2 menu.
2. Press [5] to select both the 5. SCANNER STOPPED field and the TX option and press
[ENTER]. Disconnect connector P821 from the antenna unit.
3. Turn off screen brilliance.
4. Measure voltage between pins #12(+) and #5(-) on connector P801 on the RFC Board
(03P9243) in the antenna unit.
5. If the voltage is not within the rating shown in Table 3-1, adjust potentiometer VR1 on the
RFC Board.
6. Show the INITIAL SETTING 2 menu, press [5] to select ST-BY, and then press [ENTER].
J611
J821
J801
VR1
03P9243

Figure 3-5 RFC Board

Manual

View the manual for the Furuno FR-2115-B here, for free. This manual comes under the category not categorized and has been rated by 2 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Furuno FR-2115-B or do you need help? Ask your question here

Need help?

Do you have a question about the Furuno and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Furuno FR-2115-B specifications

Below you will find the product specifications and the manual specifications of the Furuno FR-2115-B.

The Furuno FR-2115-B is a radar system manufactured by Furuno, a leading provider of marine electronics. Although this particular model is not categorized, it is designed for professional use in the maritime industry. Its main function is to provide accurate and reliable radar imaging for marine navigation and safety purposes. The Furuno FR-2115-B is constructed with high-quality materials to ensure durability and long-lasting performance. It incorporates advanced radar technology, allowing for precise detection and tracking of objects on the water, including other vessels, landmarks, and potential hazards. This radar system operates at a specific frequency range, providing clear and detailed images even in challenging weather conditions. The FR-2115-B is equipped with a high-power transmitter, which enables it to scan the surrounding area with an extended range. This helps the user to have a comprehensive view of their surroundings, enhancing situational awareness and allowing for proactive navigation decisions. The system is also capable of detecting and displaying targets with high accuracy, making it an invaluable tool for collision avoidance and overall safety. Additionally, the Furuno FR-2115-B features a user-friendly interface, allowing for easy operation and interpretation of the radar data. It is designed to be compatible with various display units, providing flexibility and customization options for different user preferences and vessel requirements. In summary, the Furuno FR-2115-B is a professional-grade radar system designed for marine navigation and safety applications. Its robust construction, advanced technology, and user-friendly interface make it a reliable and indispensable tool for maritime professionals.

General
BrandFuruno
ModelFR-2115-B
Productnot categorized
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Furuno FR-2115-B below.

How do I adjust the ratio settings for the Furuno FR-2115-B to ensure optimal performance?

To adjust the ratio settings for optimal performance on the Furuno FR-2115-B radar: 1. Turn on the power and press the [RADAR MENU] key five times while holding down the [HL OFF] key. 2. Restore default settings by pressing [RADAR MENU] [0] [0] [0] [2] [0] [0] [0], selecting FACTORY DEFAULT, and pressing [ENTER] five times. 3. Adjust the video signal level by connecting an oscilloscope to TP6 on the INT Board and adjusting R21 to ensure TP6 value is 4 Vpp. 4. For remote display, adjust R134 on the INT Board. 5. For ARP board adjustment, turn GAIN, A/C SEA, and A/C RAIN controls fully counterclockwise, and adjust R104 on the ARP Board to read between 0.09 and 0.14 VDC. 6. Set controls as specified and adjust R103 on the ARP Board to control noise appearance on the display.

What steps should I take if the supply voltage settings do not match the recommended values for the Furuno FR-2115-B operation?

To address supply voltage settings not matching the recommended values for the Furuno FR-2115-B operation, follow these steps: 1. Open the INITIAL SETTING2 menu by pressing [RADAR MENU] [0] [0] [0] [2] [0]. 2. Select both the 5. SCANNER STOPPED field and the TX option by pressing [5] and then [ENTER]. 3. Disconnect connector P821 from the antenna unit and turn off the screen brightness. 4. Measure the voltage between pins #12(+) and #5 (-) on connector P801 on the RFC Board in the antenna unit. 5. If the voltage is not within the specified range, adjust potentiometer VR1 on the RFC Board. 6. Show the INITIAL SETTING 2 menu again, select ST-BY by pressing [5], and then press [ENTER].

Is the manual of the Furuno FR-2115-B available in English?

Yes, the manual of the Furuno FR-2115-B is available in English .

Is your question not listed? Ask your question here

No results