Furuno 1954C-BB manual

Furuno 1954C-BB
9.6 · 1
PDF manual
 · 223 pages
English
manualFuruno 1954C-BB
3. PLOTTER OPERATION
3-8

3.2 Presentation Mode

Three types of presentation modes are provided for the plotter display: north-up, course-up
and auto course-up. To change the presentation mode, press the HIDE/SHOW key followed
by the B: MODE soft key. Each press of the key changes the presentation mode and
presentation mode indication (top right-hand corner of the screen) cyclically in the sequence
of North-up, Course-up and Auto course-up.
For C-map model, the sequence is North-up, Perspective, Course-up and Auto course-up
when PERSPECTIVE DISPLAY is set to ON, on the CHART DETAILS menu. (See Chapter
7.)
North-up
North (zero degree) is at the top of the display and own ship is shown with a filled circle.
This mode is useful for long-range navigation.
Course-up
The course-up mode is useful for monitoring
ship’s progress towards a waypoint. The
destination is at the top of the screen when a
destination is set. When no destination is set,
the course or heading is at the top of the screen
at the moment the course-up mode is selected.
A filled triangle marks own ship’s position.
Note: The data sentences GGA and VTG must
be output from the NavNet unit connected to the
GPS navigator in order to correctly orient the
own ship marker in the course-up mode on other
NavNet units.
Auto course-up
The course is at the top of screen at the moment
the auto course-up mode is selected. In this
mode, the current course is kept at the top of the
screen when the change is within 22.5 degrees.
For example, if your vessel turns larger than
22.5 degrees to port or starboard, the chart
display will rotate so that your course is pointing
towards the top of the screen again. A filled
triangle marks own ship’s position.
Perspective (C-map only)
Chart data is projected in perspective mode, for
3D simulation, during navigation.
BRIDGE
FISH
WP-002
34°22.3456'N359.9°
M

TRIP
NU
080°22.3456'E
19.9kt99.9nm
16.0nm
MARK
ENTRY
A
B
MODE
NTH UP
C
NAV
POS
E
D.BOX
ON
/ OFF
North-up
34° 22. 3456'N 272.4°M
TRIP
CU
080° 22. 3456'E
15.9 nm 99.9 nm
+
WPT 001
16.0nm
MARK
ENTRY
A
GO TO
CURSOR
D
CENTERC
B
MODE
CSE UP
E
D.BOX
ON /OFF
Course-up
34° 22. 3456'N 272.4°
M
TRIP
CU
080° 22. 3456'E
15.9 nm 99.9 nm
+
16.0nm
MARK

ENTRY

A
E

D.BOX

ON

/ OFF

GO TO

CURSOR

D

CENTERC

B
MODE

AT CU

Auto course-up

Manual

View the manual for the Furuno 1954C-BB here, for free. This manual comes under the category marine radars and has been rated by 1 people with an average of a 9.6. This manual is available in the following languages: English. Do you have a question about the Furuno 1954C-BB or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Furuno and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Furuno 1954C-BB specifications

Below you will find the product specifications and the manual specifications of the Furuno 1954C-BB.

General
BrandFuruno
Model1954C-BB
Productmarine radar
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Furuno 1954C-BB below.

Is the manual of the Furuno 1954C-BB available in English?

Yes, the manual of the Furuno 1954C-BB is available in English .

Is your question not listed? Ask your question here

No results