Note 1: Maximum range depends on the network radar as shown below.
Model 1824C-BB: 24 nm
Model 1834C-BB: 36 nm
Model 1934C-BB: 48 nm
Model 1944C-BB: 64 nm
Model 1954C-BB: 72 nm
Note 2: You may choose which ranges to use from the RADAR RANGE SETUP menu. For
details see paragraph 7.2.2. This function is not available with the GD-1920C-BB.
2.8 Pulselength
The pulselength in use is displayed at the upper left corner of the display. Appropriate
pulselengths are preset to individual range scales. Therefore, you are not usually required
to select them. If you are not satisfied with the current pulselength setting, however, it is
possible to change it for the ranges shown below. Generally, select a longer pulse for
longer detection range and shorter pulse for better range discrimination.
1.5 nm, 1.5 sm, 3 km: Short pulse, medium pulse
3 nm, 3 sm, 6 km: Medium pulse, long pulse
1. If not displayed, press the HIDE/SHOW key to show the radar soft keys.
2. Press the A: SIGNAL PROC. soft key.
Manual
View the manual for the Furuno 1954C-BB here, for free. This manual comes under the category marine radars and has been rated by 1 people with an average of a 9.6. This manual is available in the following languages: English. Do you have a question about the Furuno 1954C-BB or do you need help? Ask your question here
Need help?
Do you have a question about the Furuno and is the answer not in the manual?
Question and answer
Number of questions: 0