alarm, trip alarm, water temperature alarm and bottom alarm. (The bottom and water
temperature alarms, which require depth and water temperature data, may also be set on
the sounder alarm menu. For these alarms see Chapter 4.)
You may set up the plotter alarms on the ALARM menu, which may be displayed by
pressing the ALARM key.
ALARM2
EDIT
NEXT
PAGE
CLEAR
ALARM
ALARM1
EDIT
NEXT
PAGE
CLEAR
ALARM
RETURN
Page 2Page 1
PREV.
PAGE
PREV.
PAGE
AUDIO ALARM INTERNAL BUZZ
ARRIVAL ALARMOFF 0.010nm
ANCHOR WATCH ALARMOFF 0.010nm
PROXIMITY ALARMOFF
XTE ALARMOFF 0.050nm
SPEED ALARMOFF
TRIP ALARMOFF 0000.0nm
ALARM INFORMATION
NO ALARM
BOTTOM ALARMOFF
TEMPERATURE ALARMOFF
GROUNDING ALARMOFF*
GROUNDING ALARM RANGE*
ALARM INFORMATION
NO ALARM
G ALRM
REPORT*
* C-MAP specification only
G ALRM
REPORT*
Plotter alarm menu
3.11.1 Audio alarm on/off
Audio and visual alarms are released whenever an alarm setting is violated. You can
enable or disable the audio alarm as follows:
1. Press the ALARM key to show the alarm menu.
2. Use the Trackball to select AUDIO ALARM.
3. Press the A: EDIT soft key to show the audio alarm window.
AUDIO ALARM
INT & EXT BUZZ
INTERNAL BUZZ
OFF
Audio alarm window
4. Use the Trackball to select INT & EXT BUZZ (Internal + External alarm), INTERNAL
BUZZ (Internal alarm) or OFF as appropriate. This turns on or off the audio alarm
globally for all alarms, including radar.
5. Press the C: ENTER soft key.
6. Press the ALARM key to finish.
Manual
View the manual for the Furuno 1954C-BB here, for free. This manual comes under the category marine radars and has been rated by 1 people with an average of a 9.6. This manual is available in the following languages: English. Do you have a question about the Furuno 1954C-BB or do you need help? Ask your question here
Need help?
Do you have a question about the Furuno and is the answer not in the manual?
Question and answer
Number of questions: 0