Furuno 1954C-BB manual

Furuno 1954C-BB
9.6 · 1
PDF manual
 · 223 pages
English
manualFuruno 1954C-BB
3. PLOTTER OPERATION

3-39

7. Operate the Trackball to place the cursor on the waypoint you want to remove from the
route.
8. Press the D: REMOVE WPT soft key. The route is redrawn, eliminating the waypoint
removed.
9. Press the MENU key to close the menu.

3.9.5 Erasing routes

1. Press the MENU key to open the menu.
2. Press the C: WAYPOINTS/ROUTES soft key.
3. Press the B: ROUTES soft key.
4. Use the Trackball to select a route.
5. Press the D: ERASE ROUTE soft key. You are asked if you are sure to erase the route.
6. Push the ENTER knob to erase the route, or the CLEAR key to escape.
7. Press the MENU key to close the menu.

3.10 Navigation

This section shows you how to get to a desired destination by “quick points,” waypoints,
port services and routes.
Note: Reciprocal setting and canceling of destination is available by outputting the data
sentence ZDA from the NavNet unit connected to the navigator.

3.10.1 Navigating to a “quick point”

The “quick point” feature allows you to navigate to point(s) without retaining the data
indefinitely in your unit’s memory.
Selecting quick point entry method
You need to tell your unit how to set the quick point: 1 POINT, 35 POINTS (up to 35 points)
or 35PTS/FIND. (For how to navigate to points/port services see “3.10.3 Navigating to ports,
port services” on page 3-41.)
1. Press the MENU key.
2. Press the B: PLOTTER SETUP soft key.
3. Use the Trackball to select SET GOTO METHOD, then press the A: EDIT soft key.
GOTO METHOD
~
1 POINT
{
35 POINTS
{
35PTS/PORT SVC*
*For C-map: "FIND"
Go to method window
4. Use the Trackball to select a method.
5. Press the C: ENTER soft key.
6. Press the MENU key to close the menu.

Manual

View the manual for the Furuno 1954C-BB here, for free. This manual comes under the category marine radars and has been rated by 1 people with an average of a 9.6. This manual is available in the following languages: English. Do you have a question about the Furuno 1954C-BB or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Furuno and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Furuno 1954C-BB specifications

Below you will find the product specifications and the manual specifications of the Furuno 1954C-BB.

General
BrandFuruno
Model1954C-BB
Productmarine radar
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Furuno 1954C-BB below.

Is the manual of the Furuno 1954C-BB available in English?

Yes, the manual of the Furuno 1954C-BB is available in English .

Is your question not listed? Ask your question here

No results