Furuno 1732C manual

Furuno 1732C
5.5 · 1
PDF manual
 · 252 pages
English
manualFuruno 1732C
2. RADAR OPERATION
2-2

2.2 Transmitting, Stand-by

1. Turn the power on. The products information appears and is then followed by
the radar screen. You can display the radar screen at once by pressing the
any key.
2. Press the [POWER/BRILL] key momentarily.
3. Press the RADAR STBY soft key to highlight TX on its label.
4. When the radar picture is not required, but you want to keep it in a state of
readiness, press the [POWER/BRILL] key momentarily followed by RADAR
TX soft key.
5. Press the RETURN soft key to finish.

2.3 Tuning

The radar receiver can be tuned automatically or manually, and the default
tuning method is automatic. To adjust manually or switch to automatic tuning, do
the following:
1. Press the [MENU] key to display the main menu.
2. Press the RADAR DISPLAY SETUP soft key.
3. Select TUNING and press the EDIT soft key.
AUTO
MAN
TUNING
Tuning bar
Tuning window
4. Choose MAN or AUTO as appropriate.
5. For manual tuning, adjust the [ENTER] knob until the tuning bar is at its
longest position.
6. Press the RETURN soft key.
7. Press the [MENU] key to close the menu.
Note: If the auto setting does not provide satisfactory tuning, see the installation
manual for how to adjust tuning.

2.4 Adjusting the Gain

The [GAIN] key adjusts the sensitivity of the radar receiver. It works in a manner
similar to the volume control of a broadcast receiver, which amplifies received
signals.
The proper setting is such that the background noise is just visible on the screen.
If your gain setting is too low, weak echoes may be missed. On the other hand
excessive gain yields too much background noise; strong targets may be missed
because of the poor contrast between desired echoes and the background noise
on the display.

Manual

View the manual for the Furuno 1732C here, for free. This manual comes under the category marine radars and has been rated by 1 people with an average of a 5.5. This manual is available in the following languages: English. Do you have a question about the Furuno 1732C or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Furuno and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Furuno 1732C specifications

Below you will find the product specifications and the manual specifications of the Furuno 1732C.

General
BrandFuruno
Model1732C
Productmarine radar
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Furuno 1732C below.

Is the manual of the Furuno 1732C available in English?

Yes, the manual of the Furuno 1732C is available in English .

Is your question not listed? Ask your question here

No results