Furuno 1732C manual

Furuno 1732C
5.5 · 1
PDF manual
 · 252 pages
English
manualFuruno 1732C
1. OPERATIONAL OVERVIEW

1-18

Antenna unit-generated echoes

1. Select RADAR SIMULATION DATA, then press the EDIT soft key.

2. Select YES and push the [ENTER] knob to erase simulation data and get

new data. The message “Now getting demo data. Do not turn off display

unit.” appears while the unit is receiving radar data.

Note: If the network radar could not be found “Radar source is not found.

Cannot get demo data.” appears. Wait one minute after the message

disappears. Actual time may be longer depending on the system

configuration. And if the radar is not active, the message “Radar is not

active. Cannot get demo data.” is displayed. Check that the radar is

plugged in and its signal cable is firmly fastened.

3. Select RADAR, then press the EDIT soft key.

4. Select SIMULATION 2, then press the [ENTER] knob.

5. Press the [MENU] key to close the menu.

Plotter

1. Select PLOTTER, then press the EDIT soft key.

PLOTTER
SIMULATION
LIVE
2. Select SIMULATION, then press the [ENTER] knob.
3. Select SPEED and press the EDIT soft key.
4. Enter speed (setting range, 0-99 kt, default speed, 0 kt) with the
alphanumeric keys and push the [ENTER] knob.
5. Select COURSE and press the EDIT key.
6. Select “8 FIGURE” to trace the simulated ship’s track in a figure-eight course,
or enter your own course at DIRECTION. Use the trackball to select digit and
enter value with the alphanumeric keys.
7. Press the ENTER soft key.
8. Select LATITUDE and press the EDIT soft key.
9. Enter latitude (setting range, 85
°
N-85
°
S, default setting, 45
°
35.000’N) and
push the [ENTER] knob.
10. Select LONGITUDE and press the EDIT soft key.
11. Enter longitude (setting range, 180
°
E-180
°
W, default setting, 125
°
00.000’W)
and push the [ENTER] knob.
12. Select START DATE & TIME and push the EDIT soft key.
13. Enter start date and time and push the [ENTER] knob.
14. Press the [MENU] key to close the menu.

Manual

View the manual for the Furuno 1732C here, for free. This manual comes under the category marine radars and has been rated by 1 people with an average of a 5.5. This manual is available in the following languages: English. Do you have a question about the Furuno 1732C or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Furuno and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Furuno 1732C specifications

Below you will find the product specifications and the manual specifications of the Furuno 1732C.

General
BrandFuruno
Model1732C
Productmarine radar
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Furuno 1732C below.

Is the manual of the Furuno 1732C available in English?

Yes, the manual of the Furuno 1732C is available in English .

Is your question not listed? Ask your question here

No results