Furuno 1732C manual

Furuno 1732C
5.5 · 1
PDF manual
 · 252 pages
English
manualFuruno 1732C
3. PLOTTER OPERATION

3-61

3.13 Entering the MOB Mark, Setting MOB as

Destination

The MOB (Man Overboard) mark functions to mark man overboard position. You

can inscribe this mark from any mode, except while playing back data or

conducting a self-test. Note that this function requires position data.

Man
overboad
Range, bearing
Current
position
MOB
mark
MOB Data Box
Bearing and range
to MOB position
M
(MOB)
M
O
B
162.5°
0.49 nm
MOB concept
1. Press and hold down the [SAVE/MOB] key for about three seconds when
someone falls onboard. The display shows the waypoint number being saved
(youngest empty waypoint number, 001-999) followed by the MOB
confirmation window.
MAN OVER BOARD!
GO TO MOB?
YES ... PUSH ENTER KNOB
NO ... PUSH CLEAR KEY
WAYPOINT SAVED!
XXXWPT
CONTINUE PUSHING
FOR MOB!
After
several
seconds
XXX = Waypoint number
MOB mark messages
2. Push the [ENTER] knob to select the MOB position as the destination, or
press the [CLEAR] key to only mark current ship’s position as a waypoint. If
you select the MOB position as destination;
A full-screen radar, plotter or overlay (color model only) appears depending on
the display in use.
The MOB mark “MOB” appears at the MOB position and a line runs between it
and current position. This line shows the shortest course to the MOB position.
Range and bearing to the MOB position are shown in the MOB data box.
To erase an MOB mark from the plotter display, you must first erase its
corresponding waypoint. Place the cursor on the MOB mark, then press the
[CLEAR] key followed by pushing the [ENTER] knob to erase the waypoint. Then,
repeat to erase the MOB mark..

Manual

View the manual for the Furuno 1732C here, for free. This manual comes under the category marine radars and has been rated by 1 people with an average of a 5.5. This manual is available in the following languages: English. Do you have a question about the Furuno 1732C or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Furuno and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Furuno 1732C specifications

Below you will find the product specifications and the manual specifications of the Furuno 1732C.

General
BrandFuruno
Model1732C
Productmarine radar
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Furuno 1732C below.

Is the manual of the Furuno 1732C available in English?

Yes, the manual of the Furuno 1732C is available in English .

Is your question not listed? Ask your question here

No results