View the manual for the Furuno 1721 Mark-2 here, for free. This manual comes under the category not categorized and has been rated by 2 people with an average of a 7.7. This manual is available in the following languages: English. Do you have a question about the Furuno 1721 Mark-2 or do you need help? Ask your question here
Below you will find the product specifications and the manual specifications of the Furuno 1721 Mark-2.
The Furuno 1721 Mark-2 is a radar system that falls into the uncategorized category. It is a marine accessory designed to provide radar imaging and detection capabilities for boats and ships. The radar system is intended to enhance safety and navigation by detecting objects and other vessels in the vicinity. Although specific specs are not provided, the Furuno 1721 Mark-2 is likely to have a range of features commonly found in radar systems. This may include a display screen for visual representation of radar information, as well as various controls and settings to adjust the radar performance. Being a radar system, the Furuno 1721 Mark-2 is expected to utilize radar technology to emit radio waves and receive their echoes. These echoes are then processed to generate a visual representation of the surrounding area, enabling the operator to identify nearby objects and vessels. Given the lack of detailed information, it is difficult to make specific comments about the radar system's design or its compatibility with different marine vessels. However, like other Furuno products, the Furuno 1721 Mark-2 is likely to be built using high-quality materials and to be reliable and durable. In summary, the Furuno 1721 Mark-2 is an uncategorized radar system designed for marine use. It offers radar imaging and detection capabilities to enhance safety and navigation for boats and ships. While specific details or specs are not provided, it is expected to have standard features commonly found in radar systems and adhere to the reliable and durable standards associated with the Furuno brand.
| Brand | Furuno |
| Model | 1721 Mark-2 |
| Product | not categorized |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Furuno 1721 Mark-2 below.
To troubleshoot issues with the installation of the Antenna Unit of the Furuno 1721 Mark-2, follow these steps: 1. Connect the three plugs (P801, P813, and P810) to the antenna unit. Make sure they are securely connected. 2. Attach the supplied EMI core to the antenna cable. Follow the instructions provided in the manual for proper attachment. 3. Put the radome (radome cover) on the radome base assembly. Ensure that the arrow on the radome faces toward the bow of the ship. 4. Tighten the fixing bolts for the radome to secure it in place. 5. Properly support the cable run and avoid using it as a foothold or handhold. Use clips or hangers every 20 cm to provide support. By following these steps, you can troubleshoot installation issues with the Antenna Unit of the Furuno 1721 Mark-2. If you encounter any further difficulties, please refer to the manual for additional guidance or contact your local agent/dealer for assistance.
If the plugs are not properly connected to the antenna unit of the Furuno 1721 Mark-2, follow these steps to resolve the issue: 1. Check each plug connection individually. Ensure that they are securely inserted into their respective ports on the antenna unit. 2. Verify that the plugs are oriented correctly. Match the shape and alignment of the plugs with the corresponding ports on the antenna unit. 3. If the plugs are loose, gently push them in until you feel a firm connection. Avoid using excessive force to prevent damage. 4. Inspect the plugs for any dirt, debris, or corrosion. If present, clean the plugs using a soft cloth or brush. Ensure that they are dry before reconnecting. 5. Double-check the cable routing to ensure that it is not causing strain or tension on the plugs. Adjust the cable position if necessary. By following these steps, you can troubleshoot issues with the plugs not being properly connected to the antenna unit of the Furuno 1721 Mark-2. If the problem persists, consider contacting your local agent/dealer for further assistance.
To fix issues with the EMI core attachment to the antenna cable of the Furuno 1721 Mark-2, follow these steps: 1. Connect the three plugs (P801, P813, and P810) to the antenna unit as shown in the manual. 2. Attach the supplied EMI core to the antenna cable. Refer to the diagram provided in the manual for the correct attachment method. 3. Ensure that the EMI core is securely attached to the antenna cable. It should fit snugly and not be loose. 4. Verify that the radome (radome cover) is positioned correctly on the radome base assembly. The arrow on the radome should face toward the bow of the ship. 5. Tighten the fixing bolts for the radome to secure it in place. 6. Make sure that the cable run is properly supported and does not serve as a foothold or handhold. Use clips or hangers every 20 cm to provide support. By following these steps, you can fix issues with the EMI core attachment to the antenna cable of the Furuno 1721 Mark-2. If you continue to experience difficulties, consider contacting your local agent/dealer for further assistance.
If the radome cover of the Furuno 1721 Mark-2 is not positioned correctly, follow these steps to check and resolve the issue: 1. Ensure that the radome base assembly is securely mounted on the antenna unit. Check the mounting bolts and tighten them if necessary. 2. Verify that the arrow on the radome cover is facing toward the bow of the ship. If it is not, rotate the radome cover until it aligns correctly. 3. Inspect the radome cover for any obstructions or debris that may be preventing it from fitting properly. Clean the radome cover if needed. 4. Check the alignment of the radome cover with the antenna unit. It should be centered and evenly positioned. 5. If the radome cover is still not positioned correctly, remove it and reattach it, ensuring that it fits securely onto the radome base assembly. By following these steps, you can check and resolve issues with the positioning of the radome cover of the Furuno 1721 Mark-2. If the problem persists, consider contacting your local agent/dealer for further assistance.
To resolve problems with the fixing bolts for the radome of the Furuno 1721 Mark-2, follow these steps: 1. Inspect the fixing bolts to ensure they are properly tightened. Use a suitable wrench or tool to tighten any loose bolts. 2. Check the alignment of the radome with the antenna unit. If the radome is not aligned correctly, adjust the position of the radome until it aligns properly. 3. If the fixing bolts are damaged or missing, replace them with suitable bolts of the same size and type. Refer to the manual for the specific bolt requirements. 4. Ensure that the fixing bolts are securely fastened but avoid over-tightening, as this may cause damage. Use the appropriate torque specifications if available. 5. Double-check the stability of the radome by gently shaking it. If there is excessive movement or looseness, recheck the fixing bolts and tighten them as necessary. By following these steps, you can resolve problems with the fixing bolts for the radome of the Furuno 1721 Mark-2. If the issue persists, consider contacting your local agent/dealer for further assistance.
Yes, the manual of the Furuno 1721 Mark-2 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Furuno and is the answer not in the manual?
Question and answer
Number of questions: 0