Funai LT8-M26BB manual

Funai LT8-M26BB
(1)
  • Number of pages: 28
  • Filetype: PDF
2
EN
PRECAUTIONS
POWER SUPPLY
The main power supply is engaged when the main plug is
plugged in a 220-240 V~, 50 Hz AC outlet. To operate the
unit, press [Q (standby-on)] to turn on the unit.
WARNING: LIVE PARTS INSIDE.
DO NOT REMOVE ANY SCREWS.
CAUTION
1) Do not attempt to open the cabinet. There are no user
serviceable parts inside. Refer all servicing to qualified
service personnel.
2) Slots and openings in the cabinet and the sides or
bottom are provided for ventilation. To ensure reliable
operation and to protect the unit from overheating, these
openings must not be blocked or covered.
Avoid installation in enclosed spaces such as bookcases
unless proper ventilation is provided.
3) Keep the unit away from radiators and other heat
sources.
4) Do not push objects of any kind into the unit through
the cabinet slots or openings as they could touch
electrically live parts or short circuit parts resulting in a
fire or electric shock.
5) To prevent fire or shock hazard, do not expose this unit
to dripping or splashing, no objects filled with liquids,
such as vases, should be placed on the unit.
6) Use the unit on a horizontal (flat) surface only.
7) Do not place any combustible objects on the unit
(candles, etc.).
8) The LCD panel used in this product is made of glass.
Therefore, it can break when the product is dropped or
applied with impact. Be careful not to be injured by
broken glass pieces in case the LCD panel breaks.
The LCD panel is a very high technology product with
921,600 thin film transistors, giving you fine picture
details. Occasionally, a few non-active pixels may appear
on the TV screen as a fixed point of blue, green or red.
Please note that this does not affect the performance of
your product.
9) Disconnect the mains plug to switch off when the unit
becomes faulty or not in use.
10) The mains plug shall remain readily operable.
11) Read the manual instructions to ensure correct and safe
installation and interconnection of the unit in
multimedia systems.
12) Keep a distance of 20 cm around the ventilation
openings of the unit.
13) Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the
like.
To aid reporting in case of loss or theft, please record the unit’s
model and serial numbers in the space provided. The numbers
are located at the rear of the unit.
Model number: _________________
Serial number : _________________

WARNING:

To prevent the spread of

fire, keep candles or

other open flames away

from this product at all

times

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the apparatus’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the apparatus.
Do not place the unit on the furniture that is capable of
being tilted by a child or an adult leaning, pulling, standing
or climbing on it. A falling unit can cause serious injury or
even death.
Funai LT8-M26BB

Need help?

Number of questions: 0

Do you have a question about the Funai LT8-M26BB or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Funai LT8-M26BB owners to properly answer your question.

View the manual for the Funai LT8-M26BB here, for free. This manual comes under the category LCD TVs and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Funai LT8-M26BB or do you need help? Ask your question here

Funai LT8-M26BB specifications

Vibrant detail from practically any position with consistent color and image clarity maintained across an ultra-wide 178...
Vibrant detail from practically any position with consistent color and image clarity maintained across an ultra-wide 178...
See your digital world in a whole new way. Enjoy movies and photos with the great image quality and high-definition deta...
No need to buy external speakers for great audio.  With integrated speakers this display is ready to go once you’re conn...
Dual HDMI ports means more options and more devices you can connect for big screen, HD visuals.*
*High definition (HD) c...
The display is equipped with standard VESA mounting for showcasing on a wall or swivel arm.
Convenience in the palm of your hand with a remote control that makes controlling your display easier than ever.
General
Brand Funai
Model LT8-M26BB
Product LCD TV
EAN 4013099061353
Language English
Filetype PDF
Display
Comb filter 3D
Progressive scan
Display technology LCD
Display diagonal 26 "
Display brightness 360 cd/m²
Response time 6.5 ms
Viewing angle, horizontal 178 °
Viewing angle, vertical 178 °
Display resolution 1366 x 768 pixels
HD type HD
TV tuner
Channels quantity 999 channels
Tuner type Digital
Other features
Power requirements 200-240V
Built-in speaker(s)
DVB DVB-T
Display sRGB
Performance
Noise reduction
Teletext function
Management features
On Screen Display (OSD)
Sleep timer
On/Off timer
Ports & interfaces
SCART ports quantity 1
RS-232 ports 0
Audio (L/R) in 1
Audio (L/R) out 0
RF ports quantity 0
Common interface (CI)
Headphone outputs 1
S-Video inputs quantity 1
Composite video out 0
Composite video in 0
PC in (D-Sub)
PC Audio in
Component video (YPbPr/YCbCr) in 1
USB 2.0 ports quantity 0
HDMI ports quantity 2
Design
LED indicators Stand-by
Product colour Black
VESA mounting
Weight & dimensions
Weight (without stand) 10550 g
Power
Power consumption (typical) 85 W
Power consumption (standby) 0.54 W
Audio
RMS rated power 10 W
Number of speakers 2
Packaging data
Remote control included
show more

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Funai LT8-M26BB.

Is your question not listed? Ask your question here