Fujitsu TFM Module f/FBU option manual

Fujitsu TFM Module f/FBU option
9 · 1
PDF manual
 · 116 pages
English
manualFujitsu TFM Module f/FBU option
Modular RAID Controllers
93
Modular RAID 12Gb/s (SAS3.0)
Indicators

5.3.4 Installation

This section describes how to install the SAS RAID controller in a server.

V CAUTION!

To safeguard against data loss, remember to back up your data before
you change your system configuration.
To install the new controller, proceed as follows:
LED Description
H322
(green blinking)
Heart Beat
Step 1 Unpack the controller
Unpack the new controller in a static-free environment. Remove
it from the anti-static bag and inspect it for damage.
If the controller appears to be damaged, contact the Fujitsu
support service.
Step 2 Prepare the server
Shut down and power off the server.
Step 3 Install the new SAS RAID controller
Refer to your server specific Upgrade and Maintenance Manual
for information on the PCIe slot and installing the controller.
Step 4 Power-up the server
Start up the server. Ensure that the SAS and/or SATA II devices
are properly connected to the controller.
During booting, a message similar to the following is displayed:
LSI MegaRAID SAS-MFI BIOS Version NTxx (Build
..date..)
Copyright(c) 2014, LSI Corporation
HA-x (Bus x Dev y) PRAID CM400i (D2937)
FW package: xxxx

Manual

View the manual for the Fujitsu TFM Module f/FBU option here, for free. This manual comes under the category controllers and has been rated by 1 people with an average of a 9. This manual is available in the following languages: English. Do you have a question about the Fujitsu TFM Module f/FBU option or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Fujitsu and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Fujitsu TFM Module f/FBU option specifications

Below you will find the product specifications and the manual specifications of the Fujitsu TFM Module f/FBU option.

General
BrandFujitsu
ModelTFM Module f/FBU option | S26361-F3669-L100
Productcontroller
EAN4051554398217, 4053162300125, 5053866578300
LanguageEnglish
FiletypeUser manual (PDF)
Ports & interfaces
PCI Express slots version2.0
Host interfacePCI Express
Supported storage drive interfacesSerial ATA
Performance
RAID levels0, 1,5, 6
SSD supportYes
Data transfer rate6 Gbit/s
Internal memory1000 MB
Memory clock speed1333 MHz
Compatible productsD3116
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Fujitsu TFM Module f/FBU option below.

A battery in my controller has started to corrode. Is the device still safe to use?

The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.

Does the Fujitsu TFM Module f/FBU option support SSDs?

Yes, the Fujitsu TFM Module f/FBU option supports SSDs, allowing for faster data transfer rates and improved performance for the user compared to traditional HDDs.

What is the data transfer rate of the Fujitsu TFM Module f/FBU option?

The data transfer rate of the Fujitsu TFM Module f/FBU option is 6 Gbit/s, which is quite high and ensures quick access to and retrieval of data for the user.

What types of RAID levels are supported by the Fujitsu TFM Module f/FBU option?

The Fujitsu TFM Module f/FBU option supports RAID levels 0, 1, 5, and 6, providing users with a range of options for data redundancy and performance optimization.

How much internal memory does the Fujitsu TFM Module f/FBU option have?

The Fujitsu TFM Module f/FBU option has 1000 MB of internal memory, which is sufficient for handling storage operations effectively and efficiently.

What is the host interface of the Fujitsu TFM Module f/FBU option?

The host interface of the Fujitsu TFM Module f/FBU option is PCI Express, which is a commonly used and reliable interface for connecting the module to the motherboard and other components in the system.

How should the FBU be mounted inside the chassis during installation?

To mount the FBU inside the chassis during installation of the Fujitsu TFM Module f/FBU option controller, follow these steps: 1. Fit the FBU under both retaining brackets of the FBU holder at a slight angle. 2. Push the FBU in until it locks in place. 3. Connect the cable end of the FBU cable to the FBU adapter cable. 4. Secure the FBU to the server chassis according to the server documentation. 5. Connect the loose end of the FBU adapter cable to the TFM on the RAID controller. These steps ensure proper installation of the FBU within the chassis.

What steps are involved in connecting the FBU to the TFM on the RAID controller using the supplied cables?

To connect the Fujitsu TFM Module f/FBU option to the RAID controller using the supplied cables, follow these steps: 1. Connect the cable end of the FBU cable to the FBU adapter cable. 2. Secure the FBU to the server chassis according to the server documentation. 3. Connect the loose end of the FBU adapter cable to the TFM on the RAID controller. Ensure proper connection as shown in the manual for seamless integration.

Is the manual of the Fujitsu TFM Module f/FBU option available in English?

Yes, the manual of the Fujitsu TFM Module f/FBU option is available in English .

Is your question not listed? Ask your question here

No results